Iopansure

Gefahreninformationscode (GHS)

• Bildanzeige (GHS)

  

• Alarmwort

  Warnung

• Gefahrenhinweise

  H302：Gesundheitsschädlich bei Verschlucken.

• Sicherheit

  P264：Nach Gebrauch gründlich waschen.

  P264：Nach Gebrauch gründlich waschen.

  P270：Bei Gebrauch nicht essen, trinken oder rauchen.

  P301+P312：BEI VERSCHLUCKEN: Bei Unwohlsein GIFTINFORMATIONSZENTRUM/Arzt/... (geeignete Stelle für medizinische Notfallversorgung vom Hersteller/Lieferanten anzugeben) anrufen.

  P501：Inhalt/Behälter ... (Entsorgungsvorschriften vom Hersteller anzugeben) zuführen.

Iopanoic acid Chemische Eigenschaften,Einsatz,Produktion Methoden

• R-Sätze Betriebsanweisung:

  R20/21/22:Gesundheitsschädlich beim Einatmen,Verschlucken und Berührung mit der Haut.

• S-Sätze Betriebsanweisung:

  S22:Staub nicht einatmen.
  S26:Bei Berührung mit den Augen sofort gründlich mit Wasser abspülen und Arzt konsultieren.
  S36/37/39:Bei der Arbeit geeignete Schutzkleidung,Schutzhandschuhe und Schutzbrille/Gesichtsschutz tragen.

• Chemische Eigenschaften

  Light Brown Solid

• Originator

  Telepaque,Winthrop,US,1952

• Verwenden

  antiulcer

• Verwenden

  Iodopanoic Acid is an iodine-containing radiocontrast medium used in cholecystography. Iodopanoic Acid is a potent inhibitor of thyroid hormone release from thyroid gland.

• Definition

  ChEBI: Iopanoic acid is a monocarboxylic acid.

• Manufacturing Process

  (A) Preparation of α-Ethyl-m-Nitrocinnamic Acid: This acid is prepared from 100 g of m-nitrobenzaldehyde, 210 g of butyric anhydride and 73 g of sodium butyrate. The crude α-ethyl-m-nitrocinnamicacid is crystallized from ethanol giving about 105 g, MP 140° to 142°C. From the filtrates there may be isolated a small amount of a stereoisomer, which when pure melts at 105° to 106°C.
  (B) Preparation of m-Amino-α-Ethylhydrocinnamic Acid: A mixture of 50 g of α-ethyl-m-nitrocinnamic acid, 9.1 g of sodium hydroxide, 600 cc of water and 5 teaspoons of Raney nickel catalyst is shaken at 32°C in an atmosphere ofhydrogen at an initial pressure of 450 psi until the calculated amount of hydrogen is absorbed. The filtered solution is acidified with hydrochloric acid, made basic with ammonium hydroxide and again acidified with acetic acid. Upon concentration of this solution, an oil separates which crystallizes upon standing, giving about 20 g, MP 60° to 68°C. Complete evaporation of the filtrate and extraction of the residue of inorganic salts with ether gives about 20 g of additional material, MP 54° to 59°C. Recrystallization of the combined product from benzene petroleum ether gives about 35 g of m-amino-α- ethylhydrocinnamic acid, MP 67° to 70°C.
  (C) Preparation of β-(3-Amino-2,4,6-Triiodophenyll-α-Ethylpropionic Acid: A solution of 5.0 g of m-amino-α-ethylhydrocinnamic acid in 100 cc of water containing 5 cc of concentrated hydrochloric acid is added over a period of ? hour to a stirred solution of 3.2 cc of iodine monochloride in 25 cc of water and 25 cc of concentrated hydrochloric acid heated to 60°C. After addition is complete, the heating is continued for one hour longer at 60° to 70°C. A black oil separates which gradually solidifies.
  The mixture is then cooled and sodium bisulfite added to decolorize. Recrystallization of the product from methanol gives about 8 g, MP 147° to 150°C. The β-(3-amino-2,4,6-triiodophenyl)-α-ethylpropionic acid may be purified further by precipitation of the morpholine salt from ether solution and regeneration of the free amino acid by treatment of a methanol solution of the morpholine salt with sulfur dioxide. The pure amino acid has the MP 155° to 156.5°C.

• Therapeutic Function

  Diagnostic aid (radiopaque medium)

Iopanoic acid Upstream-Materialien And Downstream Produkte

Iopansure Anbieter Lieferant Produzent Hersteller Vertrieb Händler.

Global(107)Suppliers

96-83-3, Iopanoic acid Verwandte Suche: