1-Chlor-2,3-epoxypropan

Gefahreninformationscode (GHS)

• Bildanzeige (GHS)

  

• Alarmwort

  Achtung

• Gefahrenhinweise

  H226：Flüssigkeit und Dampf entzündbar.

  H314：Verursacht schwere Verätzungen der Haut und schwere Augenschäden.

  H317：Kann allergische Hautreaktionen verursachen.

  H350：Kann Krebs verursachen.

• Sicherheit

  P201：Vor Gebrauch besondere Anweisungen einholen.

  P210：Von Hitze, heißen Oberflächen, Funken, offenen Flammen und anderen Zündquellenarten fernhalten. Nicht rauchen.

  P280：Schutzhandschuhe/Schutzkleidung/Augenschutz tragen.

  P303+P361+P353：BEI BERÜHRUNG MIT DER HAUT (oder dem Haar): Alle kontaminierten Kleidungsstücke sofort ausziehen. Haut mit Wasser abwaschen oder duschen.

  P305+P351+P338：BEI KONTAKT MIT DEN AUGEN: Einige Minuten lang behutsam mit Wasser spülen. Eventuell vorhandene Kontaktlinsen nach Möglichkeit entfernen. Weiter spülen.

Epichlorohydrin Chemische Eigenschaften,Einsatz,Produktion Methoden

• ERSCHEINUNGSBILD

  FARBLOSE FLüSSIGKEIT MIT CHARAKTERISTISCHEM GERUCH.

• CHEMISCHE GEFAHREN

  Polymerisiert beim Erhitzen oder unter Einfluss von starken Säurenund Basen. Beim Verbrennen Bildung giftiger und ätzender Rauche, (Chlorwasserstoff, s. ICSC 0163 und Chlorgas, s. ICSC 0126). Reagiert sehr heftig mit starken Oxidationsmitteln. Reagiert heftig mit Aluminium, Zink, Alkoholen, Phenolen, Aminen(besonders Anilin), undorganischen Säuren. Feuer- und Explosionsgefahr! Greift Stahl in Anwesenheit von Wasser an.

• ARBEITSPLATZGRENZWERTE

  TLV: 0.5 ppm (als TWA); Hautresorption; Krebskategorie A3 (bestätigte krebserzeugende Wirkung beim Tier mit unbekannter Bedeutung für den Menschen); (ACGIH 2005).
  MAK: Hautresorption; Sensibilisierung der Haut; Krebserzeugend Kategorie: 2; Keimzellmutagen Kategorie: 3B; (DFG 2005).
  

• AUFNAHMEWEGE

  Aufnahme in den Körper durch Inhalation, über die Haut und durch Verschlucken.

• INHALATIONSGEFAHREN

  Beim Verdampfen bei 20 °C kann sehr schnell eine gesundheitsschädliche Kontamination der Luft eintreten.

• WIRKUNGEN NACH WIEDERHOLTER ODER LANGZEITEXPOSITION

  Wiederholter oder andauernder Hautkontakt kann zu Hautsensibilisierung führen. Möglich sind Auswirkungen auf Nieren, Leberund Lunge. Führt zu Funktionsstörungen. Wahrscheinlich krebserzeugend für den Menschen. Tierversuche zeigen, dass die Substanz möglicherweise fruchtbarkeitsschädigend oder entwicklungsschädigend wirken kann.

• LECKAGE

  Gefahrenbereich verlassen! Fachmann zu Rate ziehen! Ausgelaufene Flüssigkeit in abdichtbaren Behältern sammeln. Reste mit Sand oder inertem Absorptionsmittel aufnehmen und an einen sicheren Ort bringen. NICHT in die Umwelt gelangen lassen. Chemikalienschutzanzug mit umgebungsluftunabhängigem Atemschutzgerät.

• R-Sätze Betriebsanweisung:

  R45:Kann Krebs erzeugen.
  R10:Entzündlich.
  R23/24/25:Giftig beim Einatmen, Verschlucken und Berührung mit der Haut.
  R34:Verursacht Verätzungen.
  R43:Sensibilisierung durch Hautkontakt möglich.

• S-Sätze Betriebsanweisung:

  S53:Exposition vermeiden - vor Gebrauch besondere Anweisungen einholen.
  S45:Bei Unfall oder Unwohlsein sofort Arzt zuziehen (wenn möglich, dieses Etikett vorzeigen).

• Aussehen Eigenschaften

  C3H5ClO. Farblose, charakteristisch stechend riechende Flüssigkeit.

• Gefahren für Mensch und Umwelt

  Gefahr explosionsartiger Reaktionen u.a. mit Säuren, Laugen, Metalloxiden, Alkoholen, Aminen, Ammoniak, Kohlenmonoxid. Polymerisation bei Katalyse und erhöhter Temperatur. Entzündlich.
  Zersetzungsprodukte sind Chlorwasserstoff und Phosgen!!
  Epichlorhydrin wirkt toxisch auf Leber und Nieren und stark reizend auf Augen und Schleimhäute. Bei Hautkontakt ist Blasenbildung möglich. Bei Inhalation ist je nach Menge mit Kopfschmerzen, Übelkeit oder Lungenödem zu rechnen. Verursacht Verätzungen. Sensibilisierung durch Hautkontakt möglich.
  Krebserregend. Erbgutverändernd.

• Schutzmaßnahmen und Verhaltensregeln

  Nur im Abzug arbeiten.
  Vor Hitze, Funken und offener Flamme fernhalten. Kühl und trocken lagern.
  Neopren-Handschuhe (nur als kurzzeitiger Spritzschutz).
  Von Zünquellen fernhalten.

• Verhalten im Gefahrfall

  Bei Brand: Entstehungsbrände mit CO2-Löscher bekämpfen. Gefahr der Rückzündung.
  Bei Verschütten: Bereich räumen, alle Zündquellen entfernen. Atemschutzgerät verwenden. Mit flüssigkeitsbindendem Material, (z.B. Rench-Rapid) aufnehmen und als Sonderabfall entsorgen.
  CO2- und Pulverlöscher.

• Erste Hilfe

  Nach Hautkontakt: Mit viel Wasser abwaschen, abtupfen mit Polyethylenglykol 400.
  Nach Augenkontakt: Mit viel Wasser bei geöffnetem Lidspalt mind. 15 Minuten spülen. Augenarzt!
  Nach Einatmen: An die frische Luft bringen. Ggf. Atemspende o. Gerätebeatmung. Sofort Arzt konsultieren!
  Nach Verschlucken: Viel Wasser trinken lassen. Sofort zum Arzt!
  Nach Kleidungskontakt: Kontaminierte Kleidung sofort ausziehen.
  Bei Unwohlsein ärztlichen Rat einholen.
  Ersthelfer: siehe gesonderten Anschlag

• Sachgerechte Entsorgung

  Als Sondermüll entsorgen.

• Beschreibung

  Epoxy resins of the bisphenol A type are synthesized from epichlorhydrin and bisphenol A. This leads to bisphenol-A diglycidyl ether, which is the monomer of bisphenol-A-based epoxy resins. Sensitization to epichlorhydrin occurs mainly in workers in the epoxy-resin industry. Sensitization in individuals not working at epoxy resin plants is rare. It has however been described to occur after contact with a soil fumigant, due to solvent cement and in a worker in a pharmaceutical plant, in a division for drug synthesis. Epichlorhydrin was used for the production of both drugs propranolol and oxprenolol.

• Chemische Eigenschaften

  Epichlorohydrin is a colorless liquid with a slightly irritating, chloroform-like odor.

• Physikalische Eigenschaften

  Clear, colorless, mobile liquid with a strong, irritating, chloroform-like odor. Odor threshold concentration is 0.93 ppm (quoted, Amoore and Hautala, 1983).

• Verwenden

  Commercially the most important use is production of glycerine. Large volumes are consumed in nonglycerine areas, which largely consist of the various epoxy resins. It has use as a solvent and in the production of epichlorohydrin rubber.

• Verwenden

  Epichlorohydrin is used to make glycerol,epoxy resins, adhesive, and castings; asderivatives for producing dyes, pharmaceu-ticals, surfactants, and plasticizers; and asa solvent for resins, gums, paints, andvarnishes.

• Verwenden

  Solvent for natural and synthetic resins, gums, cellulose esters and ethers, paints, varnishes, nail enamels and lacquers, cement for Celluloid. As stabilizer.

• Definition

  ChEBI: An epoxide that is 1,2-epoxypropene in which one of the methyl hydrogens is substituted by chlorine.

• Vorbereitung Methode

  Epichlorohydrin can be prepared from 1,3-dichloropropanol-2, 2,3- dichloropropanol-1, or allyl chloride. Commercially it is prepared as an intermediate in glycerol synthesis via alkaline hydrolysis of glycerol dichlorohydrin. Both come from allyl chloride. Epichlorohydrin reacts with monohydric alcohols to give ethers by opening the oxide ring. It will react with ethers, aldehydes, ketones, organic acids and amines to give a wide variety of useful syntheses.

• Synthesis Reference(s)

  Organic Syntheses, Coll. Vol. 2, p. 256, 1943
  The Journal of Organic Chemistry, 48, p. 3831, 1983 DOI: 10.1021/jo00169a052

• Allgemeine Beschreibung

  A clear colorless liquid with an irritating chloroform-like odor. Density 9.8 lb / gal. Flash point 87°F. Polymerizable. If polymerization takes place inside a closed container, the container is subject to violent rupture. Irritates the skin and respiratory system. Toxic by ingestion. A confirmed carcinogen. Vapors heavier than air. Used to make plastics and as a solvent.

• Air & Water Reaktionen

  Highly flammable. Water soluble.

• Reaktivität anzeigen

  Epichlorohydrin may polymerize exothermically if heated or contaminated. Reacts explosively with aniline. Ignites on contact with potassium tert-butoxide. Reacts with trichloroethylene to give the explosive dichloroacetylene. Violent reaction with sulfuric acid or isopropylamine. Exothermic polymerization on contact with strong acids or bases, zinc, aluminum, aluminum chloride, iron, ferric chloride [Sax, 9th ed., 1996, p. 1469].

• Hazard

  Toxic by inhalation, ingestion, and skin absorption; strong irritant, a carcinogen. Flammable, moderate fire risk. TLV: 0.5 ppm; animal carcinogen.

• Health Hazard

  Epichlorohydrin is caustic as both a liquid and gas. Irritation of the eyes and skin, and skin sensitization has been observed. Exposure to epichlorohydrin has caused inflammation of the lungs, asthmatic bronchitis, and liver and kidney damage. In acute poisonings, death may be caused by respiratory paralysis.

• Health Hazard

  Epichlorohydrin is toxic, carcinogenic, and astrong irritant. Its vapors can produce irrita-tion in the eyes, skin, and respiratory tract.Exposure to high concentration resulted indeath in animals, injuring the central nervoussystem. The liquid can absorb through humanskin, causing painful irritation of subcuta-neous tissues (ACGIH 1986). The symptomsof toxicity from high dosage in test animalswere paralysis of muscles and slow devel-opment of respiratory distress. Long expo-sures at 120 ppm for several hours resultedin lung, kidney, and liver injury in rats(Gage 1959). Ingestion by an oral routecaused tremor, somnolence, and ataxia inmice (NIOSH 1986). The toxic symptomsand lethal doses varied widely with animalspecies. The toxic metabolite of epichlorhy-drin could be ?- chlorohydrin ; thelatter was produced in vitro by rat livermicrosomes (Gingell et al. 1987).
  A 25 ppm concentration may be detectableby odor. Exposure at this level may causeburning of the eyes and nose in humans.Above 100 ppm even a short exposure maybe hazardous to humans, causing nausea,dyspnea, lung edema, and kidney injury.
  Epichlorohydrin is mutagenic and hasshown carcinogenicity in test animals. Itcaused tumors in the lungs and nose andat gastrointestinal and endocrine sites. Expo-sure to this compound caused harmful repro-ductive effects on fertility and birth defectsin mice.

• Brandgefahr

  When heated to decomposition, Epichlorohydrin evolves highly toxic fumes of phosgene and carbon monoxide. Reactive and incompatible with strong oxidizers, strong acids, caustics, zinc, aluminum, chlorides of iron and aluminumand compounds with an active hydrogen atom, including water. Unstable, avoid heat, contaminants, strong acids and bases, certain curing agents such as ethylenediamine. Hazardous polymerization may occur.

• Flammability and Explosibility

  Flammable

• Chemische Reaktivität

  Reactivity with Water Mild reaction; not likely to be hazardous; Reactivity with Common Materials: No reaction; Stability During Transport: Stable; Neutralizing Agents for Acids and Caustics: Not pertinent; Polymerization: Can polymerize in presence of strong acids and bases, particularly when hot; Inhibitor of Polymerization: None used.

• Kontakt-Allergie

  Epoxy resin of the Bisphenol A type is synthesized from epichlorhydrin and bisphenol A. It leads to bisphenol A diglycidyl ether, which is the monomer ofbisphenol-A-based epoxy resins. Sensitization to epichlorhydrin occurs mainly in workers of the epoxy resin industry. Sensitization in individuals not working at epoxy resin plants is rare. It has, however, been described to occur following exposure to a soil fumigant, due to solvent cement, and in a worker in a pharmaceutical plant, in a division of drug synthesis. Epichlorhydrin was used for the production of drugs propranolol and oxprenolol.

• Sicherheitsprofil

  Confirmed carcinogen with experimental carcinogenic data. Poison by ingestion, skin contact, intravenous, and intraperitoneal routes. Moderately toxic by inhalation. An experimental teratogen. Other experimental reproductive effects. Human systemic effects by inhalation: respiratory, nose, and eyes. Human mutation data reported. A skin and eye irritant. A sensitizer. Flammable liquid when exposed to heat or flame. Explosive reaction with andine. Reaction with trichloroethylene forms the explosive dichloroacetylene. Ignition on contact with potassium tertbutoxide. Violent reaction with sulfuric acid or isopropylamine. Exothermic polymerization on contact with strong acids, caustic alkalies, aluminum, aluminum chloride, iron(II1) chloride, or zinc. When heated to decomposition it emits toxic fumes of Cl

• mögliche Exposition

  Epichlorohydrin, an organochlorine, is used in the manufacture of many glycerol and glycidol derivatives and epoxy resins; as a stabilizer in chlorine-containing materials; as an intermediate in the preparation of cellulose esters and ethers, paints, varnishes, nail enamels, and lacquers; as a cement for celluloid. It is used as an intermediate in the manufacture of various drugs. Increased cancer risk.

• Erste Hilfe

  If this chemical gets into the eyes, remove anycontact lenses at once and irrigate immediately for at least15 min, occasionally lifting upper and lower lids. Seek medical attention immediately. If this chemical contacts theskin, remove contaminated clothing and wash immediatelywith soap and water. Seek medical attention immediately. Ifthis chemical has been inhaled, remove from exposure,begin rescue breathing (using universal precautions, including resuscitation mask) if breathing has stopped and CPR ifheart action has stopped. Transfer promptly to a medicalfacility. When this chemical has been swallowed, get medical attention. Give large quantities of water and inducevomiting. Do not make an unconscious person vomit.Medical observation is recommended for 24-48 h afterbreathing overexposure, as pulmonary edema may bedelayed. As first aid for pulmonary edema, a doctor orauthorized paramedic may consider administering a corticosteroid spray

• Carcinogenicity

  Epichlorohydrin is reasonably anticipated to be a human carcinogenbased on sufficient evidence of carcinogenicity from studies in experimental animals.

• Environmental Fate

  Biological. Bridié et al. (1979) reported BOD and COD values of 0.03 and 1.16 g/g using filtered effluent from a biological sanitary waste treatment plant. These values were determined using a standard dilution method at 20 °C for a period of 5 d. When a sewage seed was used in a separate screening test, a BOD value of 0.16 g/g was obtained. The ThOD for epichlorohydrin is 1.21 g/g.
  Chemical/Physical. Anticipated products from the reaction of epichlorohydrin with ozone or OH radicals in the atmosphere are formaldehyde, glyoxylic acid, and ClCH2O(O)OHCHO (Cupitt, 1980). Haag and Yao (1992) reported a calculated OH radical rate constant in water of 2.9 x 108/M?sec.

• Lager

  Epichlorohydrin is stored in a well-ventilated,cool place isolated from combustible andoxidizable materials, all acids and bases,and anhydrous metal halides. Protect fromphysical damage. It is shipped in metaldrums.

• Versand/Shipping

  UN2023 Epichlorhydrin, Hazard class: 6.1; Labels: 6.1-Poisonous materials, 3-Flammable liquid.

• läuterung methode

  Distil epichlorohydrin under atmospheric pressure, heat it on a steam bath with one-quarter its weight of CaO, then decant and fractionally distil it. [Beilstein 17 V 20.]

• Toxicity evaluation

  Epichlorohydrin is an alkylating agent that is mutagenic. It may induce DNA interstrand cross-links, chromosomal aberrations, and breaks. It is also an irritant, sensitizer, and corrosive.

• Inkompatibilitäten

  May form explosive mixture with air. Slowly decomposes on contact with water. Heat or strong acids; alkalies, metallic halides, or contaminants can cause explosive polymerization. Violent reaction with strong oxidizers, aliphatic amines; alkanolamines, amines (especially aniline), alkaline earths; chemically active metals (chlorides of aluminum, iron zinc); powdered metals (aluminum, zinc); alcohols, phenols, organic acids; causing fire and explosion hazard. Will pit steel in the presence of water. Thermal decomposition forms highly toxic phosgene gas. May accumulate static electrical charges, and may cause ignition of its vapors.

• Waste disposal

  Incineration, preferably after mixing with another combustible fuel. Care must be exercised to assure complete combustion to prevent the formation of phosgene. An acid scrubber is necessary to remove the halo acids produced. Consult with environmental regulatory agencies for guidance on acceptable disposal practices. Generators of waste containing this contaminant (≧100 kg/mo) must conform with EPA regulations governing storage, transportation, treatment, and waste disposal

Epichlorohydrin Upstream-Materialien And Downstream Produkte

1-Chlor-2,3-epoxypropan Anbieter Lieferant Produzent Hersteller Vertrieb Händler.

Global(809)Suppliers

106-89-8, Epichlorohydrin Verwandte Suche: