2-Propenal

Gefahreninformationscode (GHS)

• Bildanzeige (GHS)

  

• Alarmwort

  Achtung

• Gefahrenhinweise

  H225：Flüssigkeit und Dampf leicht entzündbar.

  H311：Giftig bei Hautkontakt.

  H314：Verursacht schwere Verätzungen der Haut und schwere Augenschäden.

  H410：Sehr giftig für Wasserorganismen mit langfristiger Wirkung.

• Sicherheit

  P210：Von Hitze, heißen Oberflächen, Funken, offenen Flammen und anderen Zündquellenarten fernhalten. Nicht rauchen.

  P273：Freisetzung in die Umwelt vermeiden.

  P280：Schutzhandschuhe/Schutzkleidung/Augenschutz tragen.

  P303+P361+P353：BEI BERÜHRUNG MIT DER HAUT (oder dem Haar): Alle kontaminierten Kleidungsstücke sofort ausziehen. Haut mit Wasser abwaschen oder duschen.

  P305+P351+P338：BEI KONTAKT MIT DEN AUGEN: Einige Minuten lang behutsam mit Wasser spülen. Eventuell vorhandene Kontaktlinsen nach Möglichkeit entfernen. Weiter spülen.

Acrolein Chemische Eigenschaften,Einsatz,Produktion Methoden

• ERSCHEINUNGSBILD

  GELBE BIS FARBLOSE FLüSSIGKEIT MIT STECHENDEM GERUCH.

• PHYSIKALISCHE GEFAHREN

  Die Dämpfe sind schwerer als Luft und können sich am Boden ausbreiten. Fernzündung möglich.

• CHEMISCHE GEFAHREN

  Bildung explosionsfähiger Peroxide. Kann polymerisieren unter Feuer- und Explosionsgefahr. Beim Erhitzen bilden sich giftige Rauche. Reagiert mit starken Säuren, starken Basen und starken Oxidationsmitteln. Feuer- und Explosionsgefahr.

• ARBEITSPLATZGRENZWERTE

  TLV: (als STEL, ceiling) 0,1 ppm Hautresorption; Krebskategorie A4 (nicht klassifizierbar als krebserzeugend für den Menschen); (ACGIH 2005).
  MAK: Krebserzeugend Kategorie 3B; (DFG 2005).
  

• AUFNAHMEWEGE

  Aufnahme in den Körper durch Inhalation der Dämpfe, über die Haut und durch Verschlucken.

• INHALATIONSGEFAHREN

  Beim Verdampfen bei 20 °C kann sehr schnell eine gesundheitsschädliche Kontamination der Luft eintreten.

• WIRKUNGEN BEI KURZZEITEXPOSITION

  WIRKUNGEN BEI KURZZEITEXPOSITION:
  Tränenreizend. Die Substanz reizt stark die Augen, die Haut und die Atmungsorgane. Inhalation dieser Substanz in hohen Konzentrationen kann zu Lungenödem führen (s. Anm.). Die Auswirkungen treten u.U. verzögert ein. ärztliche Beobachtung notwendig.

• LECKAGE

  Gefahrenbereich verlassen! Zündquellen entfernen. Fachmann zu Rate ziehen! Ausgelaufene Flüssigkeit in abgedeckten Behältern sammeln. Reste mit Sand oder inertem Absorptionsmittel aufnehmen und an einen sicheren Ort bringen. NICHT in die Umwelt gelangen lassen. Chemikalienschutzanzug mit umgebungsluftunabhängigem Atemschutzgerät.

• R-Sätze Betriebsanweisung:

  R11:Leichtentzündlich.
  R24/25:Giftig bei Berührung mit der Haut und beim Verschlucken.
  R26:Sehr giftig beim Einatmen.
  R34:Verursacht Verätzungen.
  R50:Sehr giftig für Wasserorganismen.

• S-Sätze Betriebsanweisung:

  S23:Gas/Rauch/Dampf/Aerosol nicht einatmen(geeignete Bezeichnung(en) vom Hersteller anzugeben).
  S26:Bei Berührung mit den Augen sofort gründlich mit Wasser abspülen und Arzt konsultieren.
  S28:Bei Berührung mit der Haut sofort abwaschen mit viel . . . (vom Hersteller anzugeben).
  S36/37/39:Bei der Arbeit geeignete Schutzkleidung,Schutzhandschuhe und Schutzbrille/Gesichtsschutz tragen.
  S45:Bei Unfall oder Unwohlsein sofort Arzt zuziehen (wenn möglich, dieses Etikett vorzeigen).
  S61:Freisetzung in die Umwelt vermeiden. Besondere Anweisungen einholen/Sicherheitsdatenblatt zu Rate ziehen.

• Aussehen Eigenschaften

  C3H4O; Acrolein, stabilisiert mit Hydrochinon (2g/l). Propen-2-al, Acrylaldehyd, Allylaldehyd. Farblose Flüssigkeit mit stechendem Geruch.

• Gefahren für Mensch und Umwelt

  Leichtentzündlich. Giftig beim Verschlucken. Sehr giftig beim Einatmen. Verursacht Verätzungen. Starke Reizwirkung auf Haut, Augen, Schleimhäute.
  Sehr giftig beim Einatmen. Verursacht Verätzungen.
  Nicht ins Abwasser gelangen lassen.

• Schutzmaßnahmen und Verhaltensregeln

  Keine Kunststofflaschen verwenden. Elektrostatische Aufladung vermeiden.
  
  Schutzhandschuhe (nur kurzzeitiger Spritzschutz)
  Substanzkontakt vermeiden.

• Verhalten im Gefahrfall

  Reinigungsverfahren: mit Kieselgur, Rench Rapid oder Sand aufnehmen, in geschlossenen Behältern der Entsorgung zuführen
  Kohlendioxid, Wasser in Sprühstrahl, Pulver

• Erste Hilfe

  Nach Hautkontakt: Sofort mit viel Wasser und Seife abwaschen.
  Nach Augenkontakt: Mindestens 15 Minuten bei geöffnetem Lidspalt mit viel Wasser spülen. Sofort zum Augenarzt.
  Nach Einatmen: An die frische Luft und ruhig lagern, Wasserdampf einatmen lassen.
  Nach Verschlucken: Viel Wasser mit Aktivkohle trinken lassen, Erbrechen auslösen, sofort zum Arzt.
  Nach Kleidungskontakt: Sofort Kleidung ablegen, Haut mit viel Wasser und Seife waschen.
  Nach Einatmen verdünnte Ammoniak-Dämpfe einatmen lassen.
  Nach Verschlucken Magenspülung mit Harnstoff und Kohle über Nasensonde
  Sauerstoffzufuhr, Beatmung, Schocktherapie.
  Ersthelfer: siehe gesonderten Anschlag

• Sachgerechte Entsorgung

  Halogenfreie organische Lösemittelabfälle.

• Beschreibung

  The first time that acrolein was produced as a commercial product was in the 1930s through the vapor-phase condensation of acetaldehyde and formaldehyde. Another method was developed in the 1940s, which involved the vapor-phase oxidation of propylene. In the 1960s, some advances were found in propylene oxidation process by the introduction of bismuth molybdate-based catalysis, and that became the primary method used for the commercial production of acrolein. Some bioproducts formed for this reaction are acrylic acid, carbon oxides, acetaldehyde, acetic acid, formaldehyde, and polyacrolein. In World War I, it was used as a chemical weapon (pulmonary irritant and lachrymatory agent). Commercial acrolein contains 95.5% or more of the compound, the main impurities being water (<3.0% by weight) and other carbonyl compounds (<1.5% by weight), mainly propanol and acetone. Hydroquinone is added as an inhibitor of polymerization (0.1–0.25% by weight).

• Chemische Eigenschaften

  Acrolein is a highly flammable, clear to yellowish liquid. It has a piercing, disagreeable odor and causes tears.

• Physikalische Eigenschaften

  Colorless to yellow, clear, watery liquid imparting a very sharp, acrid, pungent, or irritating odor. Odor threshold concentrations reported were 0.11 mg/kg by Guadagni et al. (1963), 0.21 ppm_v by Leonardos et al. (1969), and 36 ppb_v by Nagata and Takeuchi (1990). In addition, Katz and Talbert (1930) reported an experimental detection odor threshold concentration of 4.1 mg/m³ (1.8 ppm_v).

• Verwenden

  Contact herbicide and algicide; injected in water for the control of submerged and floating weeds in irrigation ditches and canals

• Verwenden

  Acrolein is used as an antimicrobial agentto prevent the growth of microbes againstplugging and corrosion, to control the aquaticweed and algae, in slime control in papermanufacturing, as a tissue fixative, and inleather tanning.
  Because of its widespread use it occursin the environment—in air and water. Afterformaldehyde it is the second most abundantaldehyde, constituting 5% of total aldehydesin air. Acrolein is one of the toxic gasesproduced in a wood or building fire or whenpolyethylene or other polymer substancesburn (Morikawa 1988; Morikawa and Yanai1986). Firefighters are at greater risk ofexposure to this gas.

• Verwenden

  Acrolein is used in the etherification of food starch up to 0.6% and for the esterification and etherification of food starch up to 0.3% with vinyl acetate up to 7.5%.

• Verwenden

  Acrolein is used in the synthesis of acrylic acid. manufacture of colloidal forms of metals; making plastics, perfumes; warning agent in methyl chloride refrigerant. Has been used in military poison gas mixtures. Used in organic syntheses. Aquatic herbicide.

• Definition

  A colorless liquid unsaturated aldehyde with a pungent odor. It can be polymerized to make acrylate resins.

• Synthesis Reference(s)

  Journal of the American Chemical Society, 68, p. 2487, 1946 DOI: 10.1021/ja01216a013

• Air & Water Reaktionen

  Highly flammable. A dangerous fire risk [Hawley]. Water soluble. Reacts slowly and exothermically with water to give 3-hydroxypropionaldehyde. A hazard can develop from this reaction if acrolein is stored over a layer of water.

• Reaktivität anzeigen

  ACROLEIN, [INHIBITED] can react violently with oxidizing agents. Polymerizes exothermically on contact with small amounts of acids (including sulfur dioxide), alkalis, volatile amines and pyridines, salts, thiourea, oxidizing agents (air) and on exposure to light and heat. Polymerization initiated by amines and pyridines occurs after a deceptive induction period. Water solutions of mineral acids and metal ions can initiate polymerization. The inhibitor (usually hydroquinone) greatly reduces tendency to polymerize. Undergoes Diels-Alder reaction with itself to give acrolein dimer. This can become a runaway reaction at 90°C [Kirk-Othmer, 4th Ed, Vol. 1]. Mixing in equal molar portions with any of the following substances in a closed container caused the temperature and pressure to increase: 2-aminoethanol, ammonium hydroxide, chlorosulfonic acid, ethylenediamine, ethyleneimine [NFPA 1991].

• Health Hazard

  Acrolein is a highly toxic compound thatcan severely damage the eyes and respiratorysystem and burn the skin. Ingestion can causeacute gastrointestinal pain with pulmonarycongestion.
  LD50 value, oral (mice): 40 mg/kg
  Acrolein is a strong lachrymator and anasal irritant. Direct contact of liquid in theeyes may result in permanent injury to thecornea. Inhalation can result in severe irritationof the eyes and nose. A concentration of0.5 ppm for 12 minutes can cause intolerableeye irritation in humans. In rats, exposure toa concentration of 16 ppm acrolein in air for4 hours was lethal.
  Acrolein can be absorbed through theskin; the spillage of liquid can cause severechemical burns. Skin contact may lead tochronic respiratory disease and producedelayed pulmonary edema. Subcutaneousadministration of acrolein produced degenerationof fatty liver and a general anestheticeffect.
  LD50 value, subcutaneous (mice): 30 mg/kg
  On the basis of the available data, aconcentration of 68 and 55 ppb may betoxic to aquatic life in fresh and salt water,respectively (U.S. EPA 1980). A concentrationas low as 21 ppb may producechronic toxicity to freshwater aquatic life.Acrolein is reported to be more toxic toaquatic organisms than are phenol, chloroandnitrophenols, aniline, o-xylene, and othertoxic compounds (Holcombe et al. 1987).Rainbow trout, spinally transected, wereexposed to an acutely toxic aqueous concentrationof acrolein to monitor their respiratory–cardiovascular responses. A steadyincrease was recorded in their cough rate.The ventilation rate, oxygen utilization, andheart rate steadily fell throughout their periodof survival.
  In a study on inhalation toxicity in rats,Crane et al. (1986) observed that the exposureto 1 atm of acrolein vapors causedphysical incapacitation. The animals lost theability to walk and expired. In a study oncytotoxicity of tobacco-related aldehydes tocultured human bronchial epithelial cells,acrolein was found to be more toxic thanformaldehyde (Graftstrom et al. 1985). Bothcompounds induced DNA damage.
  Certain sulfur compounds, such as dithiothreitol and dimercaptopropanol, reacted with acrolein to reduce itstoxicity (Dore et al. 1986). Such protectionagainst its toxicity was observed in isolatedrat hepatocytes.

• Brandgefahr

  Under fire conditions, polymerization may occur. If inside a container, violent rupture of the container may take place. When heated to decomposition, Acrolein emits highly toxic fumes. Alkalis or strong acids act as catalysts, causing a condensation reaction and liberating energy. Reaction may be very rapid and violent. Readily converted by oxygen to hazardous peroxides and acids. Unstable, avoid exposure to alkalis, strong acids, oxygen, elevated temperatures, such as fire conditions. (Polymerization inside container could cause violent rupture of container under fire conditions.)

• Flammability and Explosibility

  Acrolein is a highly flammable liquid (NFPA rating = 3) and its vapor can travel a considerable distance and "flash back." Acrolein vapor forms explosive mixtures with air at concentrations of 2.8 to 31% (by volume). Carbon dioxide or dry chemical extinguishers should be used for acrolein fires.

• Sicherheitsprofil

  Human poison by inhalation and intradermal routes. Poison experimentally by most routes. Human systemic irritant and pulmonary system effects by inhalation include: lachrymation, delayed hypersensitivity with multiple organ involvement, and respiratory system damage. Severe eye and skin irritant. Experimental reproductive effects. Human mutation data reported. Questionable carcinogen. Dangerous fire hazard when exposed to heat, flame, or oxidizers. An explosion hazard. Incompatible with amines, SO2, metal salts, oxidants, (light + heat). Violent polymerization reaction on contact with strong acid, strong base, weak acid conditions (e.g., nitrous fumes, sulfur dioxide, carbon dioxide), thiourea, or dimethylamine. When heated to decomposition it emits highly toxic fumes; can react vigorously with oxidizing materials. To fight fire, use CO2, dry chemical, or alcohol foam,

• mögliche Exposition

  Used as pharmaceutical; slimicide; and in production of cosmetics and food supplements; as an intermediate in the production of glycerine and in the production of methionine analogs (poultry feed protein supplements). It is also used in chemical synthesis (1,3,6-hexametriol and glutaraldehyde); as a liquid fuel; antimicrobial agent, in algae and aquatic weed control; and as a slimicide in paper manufacture; making plastics, drugs, and tear gas. Also, most allyl compounds may be metabolized to allyl alcohol which is metabolized to acrolein.

• Carcinogenicity

  Acrolein is a reactive intermediate of the commonly used chemotherapeutic drugs cyclophosphamide and ifosphamide. Acrolein-modified DNA was found in human peripheral blood lymphocytes from cancer patients previously treated with cyclophosphamide (a chemotherapeutic), but no association was found for cyclophosphamine. Acrolein has a classification of C, possible human carcinogen, based on limited animal carcinogenicity data and paucity of human evidence for this effect.

• Source

  Reported in cigarette smoke (150 ppm) and gasoline exhaust (0.2 to 5.3 ppm) (quoted, Verschueren, 1983). May be present as an impurity in 2-methoxy-3,4-dihydro-2H-pyran (Ballantyne et al., 1989a).
  Acrolein was detected in diesel fuel at a concentration of 3,400 μg/g (Schauer et al., 1999). Gas-phase tailpipe emission rates from California Phase II reformulated gasoline-powered automobiles with and without catalytic converters were 0.06 and 3.8 mg/km, respectively (Schauer et al., 2002).
  Schauer et al. (2001) measured organic compound emission rates for volatile organic compounds, gas-phase semi-volatile organic compounds, and particle phase organic compounds from the residential (fireplace) combustion of pine, oak, and eucalyptus. The gas-phase emission rates of acrolein were 63 mg/kg of pine burned, 44 mg/kg of oak burned, and 56 mg/kg of eucalyptus burned.

• Environmental Fate

  Biological. Microbes in site water degraded acrolein to β-hydroxypropionaldehyde (Kobayashi and Rittman, 1982). This product also forms when acrolein is hydrated in distilled water (Burczyk et al., 1968). When 5 and 10 mg/L of acrolein were statically incubated in the dark at 25°C with yeast extract and settled domestic wastewater inoculum, complete degradation was observed after 7 days (Tabak et al., 1981). Activated sludge was capable of degrading acrolein at concentrations of 2,300 ppm but no other information was provided (Wierzbicki and Wojcik, 1965)
  Photolytic. Photolysis products include carbon monoxide, ethylene, free radicals and a polymer (Calvert and Pitts, 1966). Anticipated products from the reaction of acrylonitrile with ozone or hydroxyl radicals in the atmosphere are glyoxal, forma
  Groundwater. The half-life for acrolein in groundwater was estimated to range from 14 days to 8 weeks (Howard et al., 1991)
  Chemical/Physical. Wet oxidation of acrolein at 320°C yielded formic and acetic acids (Randall and Knopp, 1980). May polymerize in the presence of light and explosively in the presence of concentrated acids (Worthing and Hance, 1991) forming disacryl, a white plastic solid (Windholz et al., 1983; Humburg et al., 1989). In distilled water, acroleinwas hydrolyzed to β-hydroxypropionaldehyde (Burczyk et al., 1968; Reinert and Rodgers, 1987; Kollig, 1993). The reported hydrolysis rate constant at pH 7 is 6.68 × 108/year (Kollig, 1993). The estimated hydrolysis half-life in water is 22 days (Burczyk et al., 1968)

• Stoffwechselwegen

  When fish are exposed to 14C-acrolein, the metabolites are identified from the edible tissues and there is very little similarity in the metabolism of acrolein among the test species. The most notable observation is that acrolein is never detected in any tissues sampled, and glycidol, glycerol, 1,3- propanediol, and glyceric acid are the major metabolites found in catfish, crayfish, bluegill, and clams, respectively.

• Lager

  Work with acrolein should be conducted in a fume hood to prevent exposure by inhalation, and splash goggles and butyl rubber gloves should be worn at all times to prevent eye and skin contact. Acrolein should be used only in areas free of ignition sources. Containers of acrolein should be stored in secondary containers in areas separate from amines, oxidizers, acids, and bases.

• Versand/Shipping

  Acrolein, stabilized, Hazard class: 6.1; Labels: 6.1-Poison Inhalation Hazard, 3-Flammable liquids. Inhalation Hazard Zone A.

• läuterung methode

  Purify acrolein by fractional distillation, under nitrogen, drying with anhydrous CaSO4 and then distilling under vacuum. Blacet, Young and Roof [J Am Chem Soc 59 608 1937] distilled it under nitrogen through a 90cm column packed with glass rings. To avoid formation of diacryl, the vapour is passed through an ice-cooled condenser into a receiver cooled in an ice-salt mixture and containing 0.5g catechol. The acrolein is then distilled twice from anhydrous CuSO4 at low pressure, catechol being placed in the distilling flask and the receiver to avoid polymerization. [Alternatively, hydroquinone (1% of the final solution) can be used.] [Beilstein 1 IV 3435.]

• Toxicity evaluation

  The main acrolein route of exposure is through smoke. Acrolein is produced as a by-product of combustion of organic compounds, being present in a large spectrum of different smoke produced by, for example, cigarettes, petrochemical fuels (like gasoline or oil), synthetic polymers, paraffin wax, trees, plants, food, animals, vegetables fats, and building fires. Additional exposure can be linked to traffic accidents or to water treated with biocides that contain acrolein. Improperly handled hazardous waste sites can release acrolein into the nearby environment (air, water, or soil).

• Inkompatibilitäten

  May form explosive mixture with air. Elevated temperatures or sunlight may cause explosive polymerization. A strong reducing agent; reacts violently with oxidizers (chlorates, nitrates, peroxides, permanganates, perchlorates, chlorine, bromine, fluorine, etc.); contact may cause fires or explosions. Keep away from alkaline materials, strong bases, strong acids, oxoacids, epoxides. Polymerizes exothermically on contact with small amounts of acids (including sulfur dioxide), alkalis, volatile amines and pyridines, salts, thiourea, oxidizing agents (air) and on exposure to light, and heat. Polymerization initiated by amines and pyridines occurs after a deceptive induction period. Water solutions of mineral acids and metal ions can initiate polymerization. The inhibitor (usually hydroquinone) greatly reduces tendency to polymerize. Reacts with acids, alkalis, ammonia, amines, oxygenperoxides. Shock-sensitive peroxides or acids may be formed over time. Attacks zinc and cadmium

• Waste disposal

  Consult with environmental regulatory agencies for guidance on acceptable disposal practices. Generators of waste containing this contaminant (≥100 kg/mo) must conform with EPA regulations governing storage, transportation, treatment, and waste disposal. Incineration. Conditions are 816 C, 0.5 second minimum for primary combustion; 1093 C, 1.0 second for secondary combustion.

Acrolein Upstream-Materialien And Downstream Produkte

2-Propenal Anbieter Lieferant Produzent Hersteller Vertrieb Händler.

Global(1)Suppliers

107-02-8, Acrolein Verwandte Suche: