Ethyl cellulose

Gefahreninformationscode (GHS)

• Bildanzeige (GHS)

  

• Alarmwort

  Warnung

• Gefahrenhinweise

  H303：May be harmfulif swallowed

  H313：Kann bei Hautkontakt gesundheitsschädlich sein.

  H315：Verursacht Hautreizungen.

  H319：Verursacht schwere Augenreizung.

  H335：Kann die Atemwege reizen.

  H412：Schädlich für Wasserorganismen, mit langfristiger Wirkung.

• Sicherheit

  P264：Nach Gebrauch gründlich waschen.

  P264：Nach Gebrauch gründlich waschen.

  P273：Freisetzung in die Umwelt vermeiden.

  P280：Schutzhandschuhe/Schutzkleidung/Augenschutz tragen.

  P302+P352：BEI BERÜHRUNG MIT DER HAUT: Mit viel Wasser/... (Hersteller kann, falls zweckmäßig, ein Reinigungsmittel angeben oder, wenn Wasser eindeutig ungeeignet ist, ein alternatives Mittel empfehlen) waschen.

  P305+P351+P338：BEI KONTAKT MIT DEN AUGEN: Einige Minuten lang behutsam mit Wasser spülen. Eventuell vorhandene Kontaktlinsen nach Möglichkeit entfernen. Weiter spülen.

  P312：Bei Unwohlsein GIFTINFORMATIONSZENTRUM/Arzt/... (geeignete Stelle für medizinische Notfallversorgung vom Hersteller/Lieferanten anzugeben) anrufen.

  P321：Besondere Behandlung

  P332+P313：Bei Hautreizung: Ärztlichen Rat einholen/ärztliche Hilfe hinzuziehen.

  P362：Kontaminierte Kleidung ausziehen und vor erneutem Tragen waschen.

  P501：Inhalt/Behälter ... (Entsorgungsvorschriften vom Hersteller anzugeben) zuführen.

Ethyl cellulose Chemische Eigenschaften,Einsatz,Produktion Methoden

• R-Sätze Betriebsanweisung:

  R36/37/38:Reizt die Augen, die Atmungsorgane und die Haut.

• S-Sätze Betriebsanweisung:

  S26:Bei Berührung mit den Augen sofort gründlich mit Wasser abspülen und Arzt konsultieren.
  S36:DE: Bei der Arbeit geeignete Schutzkleidung tragen.

• Chemische Eigenschaften

  Ethylcellulose is a tasteless, free-flowing, white to light tan-colored powder.

• Chemische Eigenschaften

  white to slightly yellowish powder

• Chemische Eigenschaften

  Ethyl celluloses are low density polymers (1070–1180 kg.m–3) with solubilities depending on the degree of ethylation; usually commercial grade contains 44–48% ethoxyl functional groups. Solid masses of ethylcellulose exhibit low absorption of moisture, excellent dimensional stability and low temperature toughness and impact resistance. Chemically they are less resistant towards acids than cellulose esters but much more resistant to alkalis. They can be processed by injection molding. Because ethylcellulose is soluble in a wide variety of solvents, it provides a wide variety of varnish formulations. Benzylcelluloses yield plastics with excellent dielectric properties and chemical stability.

• Verwenden

  ethyl cellulose is a binder, film former, and thickener. It is used in suntan gels, creams, and lotions. This is the ethyl ether of cellulose.

• Verwenden

  In the manufacture of plastics and lacquers. Pharmaceutic aid (tablet binder).

• Verwenden

  Used as a binder and filler in dry vitamin preparations, as a component of protective coatings for vitamin and mineral tablets, and as a fixative in flavoring compounds. It is a cellulose ether containing ethyoxy groups attached by an ether linkage and containing an anhydrous basis of not more than 2.6 ethoxy groups per anhydroglucose unit.

• Verwenden

  Film-former in coatings, hot-melt adhesives and transfer inks and as a plastic coating for a variety of substrates.

• synthetische

  Ethyl cellulose is prepared by reacting cellulose with caustic to form caustic cellulose, which is then reacted with chloroethane to form ethyl cellulose. Plasticgrade material contains 44-48% ethoxyl.
  Although not as resistant as cellulose esters to acids, it is much more resistant to bases. An outstanding feature is its toughness at low temperatures.

• Vorbereitung Methode

  Ethylcellulose is prepared by treating purified cellulose (sourced from chemical-grade cotton linters and wood pulp) with an alkaline solution, followed by ethylation of the alkali cellulose with chloroethane as shown below, where R represents the cellulose radical:
  RONa + C2H5Cl→ROC2H5+NaCl
  The manner in which the ethyl group is added to cellulose can be described by the degree of substitution (DS). The DS designates the average number of hydroxyl positions on the anhydroglucose unit that have been reacted with ethyl chloride. Since each anhydroglucose unit of the cellulose molecule has three hydroxyl groups, the maximum value for DS is three.

• Definition

  ChEBI: Ethyl cellulose is a glycoside.

• Trademarks

  Aquacoat ECD (FMC);Ethocel (Dow Chemical).

• Pharmazeutische Anwendungen

  Ethylcellulose is widely used in oral and topical pharmaceutical formulations.
  The main use of ethylcellulose in oral formulations is as a hydrophobic coating agent for tablets and granules.Ethylcellulose coatings are used to modify the release of a drug, to mask an unpleasant taste, or to improve the stability of a formulation; for example, where granules are coated with ethylcellulose to inhibit oxidation. Modified-release tablet formulations may also be produced using ethylcellulose as a matrix former.
  Ethylcellulose, dissolved in an organic solvent or solvent mixture, can be used on its own to produce water-insoluble films. Higher-viscosity ethylcellulose grades tend to produce stronger and more durable films. Ethylcellulose films may be modified to alter their solubility, by the addition of hypromellose or a plasticizer. An aqueous polymer dispersion (or latex) of ethylcellulose such as Aquacoat ECD (FMC Biopolymer) or Surelease (Colorcon) may also be used to produce ethylcellulose films without the need for organic solvents. Drug release through ethylcellulose-coated dosage forms can be controlled by diffusion through the film coating. This can be a slow process unless a large surface area (e.g. pellets or granules compared with tablets) is utilized. In those instances, aqueous ethylcellulose dispersions are generally used to coat granules or pellets. Ethylcellulose-coated beads and granules have also demonstrated the ability to absorb pressure and hence protect the coating from fracture during compression.
  High-viscosity grades of ethylcellulose are used in drug microencapsulation.
  Release of a drug from an ethylcellulose microcapsule is a function of the microcapsule wall thickness and surface area.
  In tablet formulations, ethylcellulose may additionally be employed as a binder, the ethylcellulose being blended dry or wetgranulated with a solvent such as ethanol (95%). Ethylcellulose produces hard tablets with low friability, although they may demonstrate poor dissolution.
  Ethylcellulose has also been used as an agent for delivering therapeutic agents from oral (e.g. dental) appliances.
  In topical formulations, ethylcellulose is used as a thickening agent in creams, lotions, or gels, provided an appropriate solvent is used. Ethylcellulose has been studied as a stabilizer for emulsions.
  Ethylcellulose is additionally used in cosmetics and food products.

• Sicherheitsprofil

  Low toxicity by ingestion and skin contact. A skin irritant. When heated to decomposition it emits acrid smoke and irritating fumes

• Sicherheit(Safety)

  Ethylcellulose is widely used in oral and topical pharmaceutical formulations. It is also used in food products. Ethylcellulose is not metabolized following oral consumption and is therefore a noncalorific substance. Because ethylcellulose is not metabolized it is not recommended for parenteral products; parenteral use may be harmful to the kidneys.
  Ethylcellulose is generally regarded as a nontoxic, nonallergenic, and nonirritating material.
  As ethylcellulose is not considered to be a health hazard, the WHO has not specified an acceptable daily intake. The highest reported level used in an oral product is 308.8 mg in an oral sustained release tablet.
  LD50 (rabbit, skin): >5 g/kg
  LD50 (rat, oral): >5 g/kg

• Lager

  Ethylcellulose is a stable, slightly hygroscopic material. It is chemically resistant to alkalis, both dilute and concentrated, and to salt solutions, although it is more sensitive to acidic materials than are cellulose esters.
  Ethylcellulose is subject to oxidative degradation in the presence of sunlight or UV light at elevated temperatures. This may be prevented by the use of antioxidant and chemical additives that absorb light in the 230–340nm range.
  Ethylcellulose should be stored at a temperature not exceeding 32°C (90°F) in a dry area away from all sources of heat. It should not be stored next to peroxides or other oxidizing agents.

• Inkompatibilitäten

  Incompatible with paraffin wax and microcrystalline wax.

• Regulatory Status

  GRAS listed. Accepted for use as a food additive in Europe. Included in the FDA Inactive Ingredients Database (oral capsules, suspensions and tablets; topical emulsions and vaginal preparations). Included in nonparenteral medicines licensed in Europe. Included in the Canadian List of Acceptable Non-medicinal Ingredients.

Ethyl cellulose Upstream-Materialien And Downstream Produkte

Ethyl cellulose Anbieter Lieferant Produzent Hersteller Vertrieb Händler.

Global(524)Suppliers

9004-57-3, Ethyl cellulose Verwandte Suche: