1,2-Dichlorethen

Bezeichnung:1,2-Dichlorethen

CAS-Nr540-59-0

Englisch Name:1,2-DICHLOROETHYLENE

CBNumberCB4674238

SummenformelC2H2Cl2

Molgewicht96.94

MOL-Datei540-59-0.mol

Synonyma

1,2-Dichlorethylen

1,2-Dichlorethen

Acetylendichlorid

1,2-Dichlorethen physikalisch-chemischer Eigenschaften

Schmelzpunkt	−57 °C(lit.)
Siedepunkt	48-60 °C(lit.)
Dichte	1.265 g/mL at 25 °C(lit.)
Dampfdruck	5.32 psi ( 20 °C)
Brechungsindex	n20/D 1.447(lit.)
Flammpunkt	43 °F
Löslichkeit	Acetonitrile (Slightly), Chloroform (Soluble)
Aggregatzustand	Colorless liquid
Geruch (Odor)	Ethereal, slightly acrid; pleasant, chloroform-like.
Merck	13,94
Dielectric constant	4.6（17℃）
Stabilität	Light Sensitive, Volatile
LogP	2.000
EPA chemische Informationen	1,2-Dichloroethylene (540-59-0)

Sicherheit

Kennzeichnung gefährlicher	F,Xn
R-Sätze:	11-20-52/53
S-Sätze:	7-16-29-61
RIDADR	UN 1150 3/PG 2
OEB	A
OEL	TWA: 200 ppm (790 mg/m3)
WGK Germany	2
RTECS-Nr.	KV9360000
HazardClass	3.1
PackingGroup	II
Giftige Stoffe Daten	540-59-0(Hazardous Substances Data)
Toxizität	LD50 i.p. in mice: ~2150 mg/kg (Gradiski)
IDLA	1,000 ppm

Gefahreninformationscode (GHS)

1,2-DICHLOROETHYLENE Chemische Eigenschaften,Einsatz,Produktion Methoden

ERSCHEINUNGSBILD
FARBLOSE FLüSSIGKEIT MIT CHARAKTERISTISCHEM GERUCH.
PHYSIKALISCHE GEFAHREN
Die Dämpfe sind schwerer als Luft und können sich am Boden ausbreiten. Fernzündung möglich.
CHEMISCHE GEFAHREN
Zersetzung beim Erhitzen oder unter Einfluss von Luft, Lichtund Feuchtigkeit unter Bildung giftiger und ätzender Rauche mit Chlorwasserstoff. Reagiert mit starken Oxidationsmitteln. Reagiert mit Kupfer / Kupferlegierungenund Basen unter Bildung vongiftigem Chloracetylen, das sich bei Kontakt mit Luft spontan entzündet. Greift Kunststoff an.
ARBEITSPLATZGRENZWERTE
TLV: 200 ppm (als TWA); (ACGIH 2005).
MAK: 200 ppm, 800 mg/m? Spitzenbegrenzung: überschreitungsfaktor II(2); (DFG 2005).
AUFNAHMEWEGE
Aufnahme in den Körper durch Inhalation der Dämpfe und durch Verschlucken.
INHALATIONSGEFAHREN
Beim Verdampfen bei 20°C tritt schnell eine gesundheitsschädliche Kontamination der Luft ein; viel schneller jedoch beim Versprühen oder Dispergieren.
WIRKUNGEN BEI KURZZEITEXPOSITION
WIRKUNGEN BEI KURZZEITEXPOSITION:
Die Substanz reizt die Augen und die Atemwege. Möglich sind Auswirkungen auf das Zentralnervensystem in hohen Konzentrationen mit nachfolgender Bewusstseinstrübung.
WIRKUNGEN NACH WIEDERHOLTER ODER LANGZEITEXPOSITION
Die Flüssigkeit entfettet die Haut. Möglich sind Auswirkungen auf die Leber.
LECKAGE
Zündquellen entfernen. Belüftung. Ausgelaufene Flüssigkeit möglichst in abdichtbaren Behältern sammeln. Reste mit trockenem Sand oder inertem Absorptionsmittel aufnehmen und an einen sicheren Ort bringen. NICHT in die Kanalisation spülen. Persönliche Schutzausrüstung: Vollschutzanzug mit umgebungsluftunabhängigem Atemschutzgerät.
R-Sätze Betriebsanweisung:
R11:Leichtentzündlich.
R20:Gesundheitsschädlich beim Einatmen.
R52/53:Schädlich für Wasserorganismen, kann in Gewässern längerfristig schädliche Wirkungen haben.
S-Sätze Betriebsanweisung:
S7:Behälter dicht geschlossen halten.
S16:Von Zündquellen fernhalten - Nicht rauchen.
S29:Nicht in die Kanalisation gelangen lassen.
S61:Freisetzung in die Umwelt vermeiden. Besondere Anweisungen einholen/Sicherheitsdatenblatt zu Rate ziehen.
Beschreibung
Acetylene dichloride is a colourless liquid (usually a mixture of the cis and trans isomers) with a slightly acrid, chloroform-like odour. Acetylene dichloride is a chemical used mainly in the production of perfumes, dyes, and thermoplastics. The type and severity of symptoms varies depending on the amount of chemical involved and the nature of the exposure. It is incompatible with strong oxidisers, strong alkalis, potassium hydroxide, and copper. Acetylene dichloride is highly flammable and in a fire gives off irritating or toxic fumes/gases. (Acetylene dichloride usually contains inhibitors to prevent polymerisation.)
Chemische Eigenschaften
1,2-Dichloroethylene exists in three isomers, sym-, cis-60% and trans-40%. There are variations in toxicity between these two forms. At room temperature, these chemicals are colorless liquids with a slightly acrid, ethereal odor. The Odor Threshold in air is 17 ppm. sym-isomer:
Chemische Eigenschaften
Acetylene dichloride is a colorless liquid (usually a mixture of the cis and trans isomers) with a slightly acrid, chloroform-like odor. It is incompatible with strong oxidizers, strong alkalis, potassium hydroxide, and copper. Acetylene dichloride is highly flammable and in a fi re gives off irritating or toxic fumes/gases. (Acetylene dichloride usually contains inhibitors to prevent polymerization.)
Chemische Eigenschaften
clear colorless to pale yellow liquid
Verwenden
1,2-Dichloroethylene is used as a solvent for organic materials and as an intermediate in the synthesis of other chlorinated compounds; it may be produced by the chlorination of acetylene but is often produced as a by-product in the manufacture of other chlorinated compounds.
Allgemeine Beschreibung
A clear colorless liquid with ether-like odor. Mixture of cis and trans isomers. Flashpoint 36 - 43° F. Denser than water and insoluble in water. Vapors heavier than air.
Air & Water Reaktionen
Highly flammable. 1,2-DICHLOROETHYLENE is sensitive to air, light and moisture. Heat contributes to instability. Insoluble in water.
Reaktivität anzeigen
1,2-DICHLOROETHYLENE reacts violently with sodium, sodium hydroxide, copper and copper alloys. 1,2-DICHLOROETHYLENE can react with caustic alkynes or their concentrated solutions. 1,2-DICHLOROETHYLENE forms explosive mixtures with N2O4. 1,2-DICHLOROETHYLENE is incompatible with strong oxidizers. 1,2-DICHLOROETHYLENE is corrosive to metals. 1,2-DICHLOROETHYLENE attacks some forms of plastics, rubber and coatings.
Health Hazard
Inhalation causes nausea, vomiting, weakness, tremor, epigastric cramps, central nervous depression. Contact with liquid causes irritation of eyes and (on prolonged contact) skin. Ingestion causes slight depression to deep narcosis.
Health Hazard
Exposures to acetylene dichloride cause irritation to the eyes, respiratory system, and CNS depression with symptoms of cough, sore throat, dizziness, nausea, drowsiness, weakness, unconsciousness, and vomiting. It involves the eyes, respiratory system, and the CNS as the target organs. Prolonged periods of exposure to acetylene dichloride defats the skin and may have effects on the liver.
Chemische Reaktivität
Reactivity with Water No reaction; Reactivity with Common Materials: No reaction; Stability During Transport: Stable; Neutralizing Agents for Acids and Caustics: Not pertinent; Polymerization: Will not occur under ordinary conditions of shipment. The reaction is not vigorous; Inhibitor of Polymerization: None used.
Sicherheitsprofil
Poison by inhalation. Moderately toxic by ingestion. A skin irritant. When heated to decomposition it emits highly toxic fumes of Cl-. See also ACETYLENE COMPOUNDS, and CHLORINATED HYDROCARBONS, ALIPHATIC .
mögliche Exposition
Primary irritant (w/o allergic reaction). 1,2-Dichloroethylene is used as a solvent for waxes, resins, and acetylcellulose. It is also used in the extraction of rubber, as a refrigerant; in the manufacture of pharmaceuticals and artificial pearls; and in the extraction of oils and fats from fish and meat.
Erste Hilfe
If this chemical gets into the eyes, remove anycontact lenses at once and irrigate immediately for at least15 min, occasionally lifting upper and lower lids. Seek medical attention immediately. If this chemical contacts theskin, remove contaminated clothing and wash immediatelywith soap and water. Seek medical attention immediately. Ifthis chemical has been inhaled, remove from exposure,begin rescue breathing (using universal precautions, including resuscitation mask) if breathing has stopped and CPR ifheart action has stopped. Transfer promptly to a medicalfacility. When this chemical has been swallowed, get medical attention. Give large quantities of water and inducevomiting. Do not make an unconscious person vomit.
Carcinogenicity
In genotoxic assays the cis isomer induced chromosomal aberrations in mouse bone marrow cells after intraperitoneal injections.7 Neither isomer was mutagenic in bacterial assays, nor did they produce chromosomal aberrations or sister chromatid exchanges in mammalian cells in vitro.
The 2003 ACGIH threshold limit valuetime- weighted average (TLV-TWA) for 1,2- dichloroethylene is 200ppm (793mg/m3).
Lager
Color Code—Red: Flammability Hazard: Store ina flammable liquid storage area or approved cabinet awayfrom ignition sources and corrosive and reactive materials.Prior to working with 1,2-DCE you should be trained on itsproper handling and storage. Before entering confined spacewhere this chemical may be present, check to make surethat an explosive concentration does not exist. 1,2-Dichloroethylene must be stored to avoid contact withstrong oxidizers (such as chlorine, bromine, and fluorine)since violent reactions occur. Store in tightly closed containers in a cool, well-ventilated area away from heat.Sources of ignition, such as smoking and open flames, areprohibited where 1,2-dichloroethylene is used, handled, orstored. Metal containers involving the transfer of=gallonsor more of 1,2-dichloroethylene should be grounded andbonded. Drums must be equipped with self-closing valves,pressure vacuum bungs, and flame arresters. Use only nonsparking tools and equipment, especially when opening andclosing containers of 1,2-dichloroethylene. Wherever 1,2-dichloroethylene is used, handled, manufactured, or stored,use explosion-proof electrical equipment and fittings.
Versand/Shipping
UN1150 Dichloroethylene, Hazard Class: 3; Labels: 3-Flammable liquid.
läuterung methode
Shake it successively with conc H2SO4, water, aqueous NaHCO3 and water. Dry it with MgSO4 and fractionally distil it to separate the cis-and trans-isomers. [Beilstein 1 IV 707-709.]
Inkompatibilitäten
May form explosive mixture with air. Attacks some plastics, rubber, and coatings. Incompatible with oxidizers (chlorates, nitrates, peroxides, permanganates, perchlorates, chlorine, bromine, fluorine, etc.); contact may cause fires or explosions. Keep away from alkaline materials, strong bases, strong acids, oxoacids, and epoxides. Gradual decomposition results in hydrochloric acid formation in the presence of ultraviolet light or upon contact with hot metal or other hot surfaces. Reacts with strong bases; potassium hydroxide; difluoromethylene, dihypofluoride, nitrogen tetroxide (explosive); or copper (and its alloys) producing toxic chloroacetylene which is spontaneously flammable on contact with air. Attacks some plastics and coatings.
Waste disposal
Incineration, preferably after mixing with another combustible fuel. Care must be exercised to assure complete combustion to prevent the formation of phosgene. An acid scrubber is necessary to remove the halo acids produced. Consult with environmental regulatory agencies for guidance on acceptable disposal practices. Generators of waste containing this contaminant (≧100 kg/mo) must conform with EPA regulations governing storage, transportation, treatment, and waste disposal.

1,2-DICHLOROETHYLENE Upstream-Materialien And Downstream Produkte

1,2-Dichlorethen Anbieter Lieferant Produzent Hersteller Vertrieb Händler.

540-59-0, 1,2-DICHLOROETHYLENE Verwandte Suche:

Send Inquriy