trans-Dichlorethylen

Gefahreninformationscode (GHS)

• Bildanzeige (GHS)

  

• Alarmwort

  Achtung

• Gefahrenhinweise

  H225：Flüssigkeit und Dampf leicht entzündbar.

  H332：Gesundheitsschädlich bei Einatmen.

  H412：Schädlich für Wasserorganismen, mit langfristiger Wirkung.

• Sicherheit

  P210：Von Hitze, heißen Oberflächen, Funken, offenen Flammen und anderen Zündquellenarten fernhalten. Nicht rauchen.

  P273：Freisetzung in die Umwelt vermeiden.

TRANS-1,2-DICHLOROETHYLENE Chemische Eigenschaften,Einsatz,Produktion Methoden

• R-Sätze Betriebsanweisung:

  R11:Leichtentzündlich.
  R20:Gesundheitsschädlich beim Einatmen.
  R52/53:Schädlich für Wasserorganismen, kann in Gewässern längerfristig schädliche Wirkungen haben.
  R39/23/24/25:Giftig: ernste Gefahr irreversiblen Schadens durch Einatmen, Berührung mit der Haut und durch Verschlucken.
  R23/24/25:Giftig beim Einatmen, Verschlucken und Berührung mit der Haut.

• S-Sätze Betriebsanweisung:

  S7:Behälter dicht geschlossen halten.
  S16:Von Zündquellen fernhalten - Nicht rauchen.
  S29:Nicht in die Kanalisation gelangen lassen.
  S61:Freisetzung in die Umwelt vermeiden. Besondere Anweisungen einholen/Sicherheitsdatenblatt zu Rate ziehen.
  S45:Bei Unfall oder Unwohlsein sofort Arzt zuziehen (wenn möglich, dieses Etikett vorzeigen).
  S36/37:Bei der Arbeit geeignete Schutzhandschuhe und Schutzkleidung tragen.

• Chemische Eigenschaften

  1,2-Dichloroethylene exists in three isomers, sym-, cis-60% and trans-40%. There are variations in toxicity between these two forms. At room temperature, these chemicals are colorless liquids with a slightly acrid, ethereal odor. The Odor Threshold in air is 17 ppm. sym-isomer:

• Chemische Eigenschaften

  colourless liquid

• Physikalische Eigenschaften

  Colorless, viscous liquid with a sweet, pleasant odor. Odor threshold concentration is 17 ppm (quoted, Amoore and Hautala, 1983).

• Verwenden

  trans-1,2-Dichloroethylene is used in the preparation of solvents and in chemical mixtures. It also acts as a synthetic agent and active constituent of perfumes. Further, it is used for electronics cleaning, precision cleaning and metal cleaning activities.

• Verwenden

  trans-1,2-Dichloroethylene may be used as an analytical reference standard for the determination of the analyte in water samples by gas chromatography (GC) based analytical techniques.

• Verwenden

  Solvent for fats, phenol, camphor, etc. Intermediate in synthesis of chlorinated solvents and compounds.

• Definition

  ChEBI: 1,2-dichloroethene is a member of chloroethenes.

• Allgemeine Beschreibung

  Clear colorless liquid with a pleasant odor. Flash point 43°F.

• Air & Water Reaktionen

  Highly flammable. Oxidizes in air to form unstable peroxides that may explode spontaneously. Insoluble in water.

• Reaktivität anzeigen

  1,2-DICHLOROETHYLENE reacts with alkalis, difluoromethylene, dihypofluorite, and nitrogen tetraoxide. Contact with solid alkalis or their concentrated solutions will cause formation of chloroacetylene, which ignites in air. Avoid contact with copper and copper alloys. Corrosive to metals unless an inhibitor has been added. Oxidation in the presence of concentrated sulfuric acid or a free radical initiator gives chloroacetyl chloride via epoxide intermediates. Incompatible with organic peroxides .

• Brandgefahr

  TRANS-1,2-DICHLOROETHYLENE is flammable.

• Flammability and Explosibility

  Flammable

• Sicherheitsprofil

  Moderately toxic by ingestion. Mddly toxic by inhalation. Human systemic effects by inhalation: sleep, hallucinations, and distorted perceptions. Experimental reproductive effects. A skin and eye irritant. Mutation data reported. Exposure to high vapor concentration can cause nausea, vomiting, weakness, tremor, and cramps. Recovery is usually prompt following removal from exposure. Dermatitis may result from defatting action on skin. Dangerous fire hazard when exposed to heat, flame, or oxidtzers. Moderate explosion hazard in the form of vapor when exposed to flame. Violent reaction with difluoromethylene dihypofluorite. Forms shock-sensitive explosive mixtures with dinitrogen tetraoxide. Reaction with solid caustic alkahes or their concentrated solutions produces chloracetylene gas that ignites spontaneously in air. Reacts violently with N2O4, KOH, Na, NaOH. Moderate explosion hazard in the form of vapor when exposed to flame. Can react vigorously with oxidizing materials. To fight fire, use water spray, foam, CO2, dry chemical. When heated to decomposition it emits toxic fumes of Cl-. See also CHLORIDES; CHLORINATED HYDROCARBONS, ALIPHATIC; and ACETYLENE COMPOUNDS.

• mögliche Exposition

  Primary irritant (w/o allergic reaction). 1,2-Dichloroethylene is used as a solvent for waxes, resins, and acetylcellulose. It is also used in the extraction of rubber, as a refrigerant; in the manufacture of pharmaceuticals and artificial pearls; and in the extraction of oils and fats from fish and meat.

• Environmental Fate

  Soil. In a methanogenic aquifer material, trans-1,2-dichloroethylene biodegraded to vinyl chloride (Wilson et al., 1986). Under anoxic conditions trans-1,2-dichloroethylene, when subjected to indigenous microbes in uncontaminated sediments, degraded to vinyl chloride (Barrio-Lage et al., 1986). trans-1,2-Dichloroethylene showed slow to moderate degradation concomitant with the rate of volatilization in a static-culture flask-screening test (settled domestic wastewater inoculum) conducted at 25 °C. At concentrations of 5 and 10 mg/L, percent losses after 4 wk of incubation were 95 and 93, respectively. The amount lost due to volatilization was 26 to 33% after 10 d (Tabak et al., 1981).
  Biological. Heukelekian and Rand (1955) reported a 10-d BOD value of 0.05 g/g which is 7.6% of the ThOD value of 0.66 g/g.
  Photolytic. Carbon monoxide, formic and hydrochloric acids were reported to be photooxidation products (Gay et al., 1976).

• Versand/Shipping

  UN1150 Dichloroethylene, Hazard Class: 3; Labels: 3-Flammable liquid.

• läuterung methode

  Dry it with MgSO4, and fractionally distil it under CO2. Fractional crystallisation at low temperatures has also been used. [Beilstein 1 IV 709.]

• Inkompatibilitäten

  May form explosive mixture with air. Attacks some plastics, rubber, and coatings. Incompatible with oxidizers (chlorates, nitrates, peroxides, permanganates, perchlorates, chlorine, bromine, fluorine, etc.); contact may cause fires or explosions. Keep away from alkaline materials, strong bases, strong acids, oxoacids, and epoxides. Gradual decomposition results in hydrochloric acid formation in the presence of ultraviolet light or upon contact with hot metal or other hot surfaces. Reacts with strong bases; potassium hydroxide; difluoromethylene, dihypofluoride, nitrogen tetroxide (explosive); or copper (and its alloys) producing toxic chloroacetylene which is spontaneously flammable on contact with air. Attacks some plastics and coatings.

• Waste disposal

  Incineration, preferably after mixing with another combustible fuel. Care must be exercised to assure complete combustion to prevent the formation of phosgene. An acid scrubber is necessary to remove the halo acids produced. Consult with environmental regulatory agencies for guidance on acceptable disposal practices. Generators of waste containing this contaminant (≧100 kg/mo) must conform with EPA regulations governing storage, transportation, treatment, and waste disposal.

TRANS-1,2-DICHLOROETHYLENE Upstream-Materialien And Downstream Produkte

trans-Dichlorethylen Anbieter Lieferant Produzent Hersteller Vertrieb Händler.

Global(217)Suppliers

156-60-5, TRANS-1,2-DICHLOROETHYLENE Verwandte Suche: