Lead (II) iodide (chemical formula: PbI) is a kind of inorganic
salt. It appears as a bright yellow crystalline solid. It has some
special applications such as the manufacture of solar cells, X-rays,
and gamma-ray detectors. In addition, it can also be used as a paint
pigment for being used in art for bronzing and in gold-like mosaic
tiles. It can be commonly synthesized through a double displacement
reaction between potassium iodide KI and lead (II) nitrate Pb(NO3)2
in water solution. Lead (II) acetate and sodium iodide can also be
used as the substitute of lead nitrate and potassium iodide,
respectively. Alternatively, it can be manufactured through the
reaction between iodine vapor and the molten lead. It is also used
in printing and photography. However, it is hazard to the
environment, and should be taken care of to limit spread to the
environment.
https://en.wikipedia.org/wiki/Lead(II)_iodide
https://pubchem.ncbi.nlm.nih.gov/compound/Lead_II__iodide#section=Top
Lead(II) iodide, also known as Lead Iodide, is a heavy, bright yellow, odorless powder. Photoelectrons are emitted when exposed to ultraviolet light, which is readily decomposed by light in the air. It is slightly soluble in hot water, slightly soluble in cold water and hot aniline, easily soluble in sodium thiosulfate solution, soluble in concentrated potassium iodide and concentrated sodium acetate solution, and insoluble in ethanol and cold concentrated hydrochloric acid. It reacts with sodium sulfide solution to form a lead sulfide precipitate. It reacts with alkali metal and alkaline earth metal carbonate solution to obtain lead carbonate precipitate.
Yellow hexagonal crystals; density 6.16 g/cm3; melts at 402°C; vaporizes at 954°C; decomposes at 180°C when exposed to green light; slightly soluble in water (0.44 g/L at 0°C and 0.63 g/L at 20°C); Ksp 8.49x10-9 at 25°C; partially soluble in boiling water (4.1 g/L at 100°C); insoluble in ethanol; soluble in alkalis and alkali metal iodide solutions.
Lead(II) iodide is used as a detector material for high energy photons including x-rays and gamma rays. It is used in photography, printing, mosaic gold, and bronzing. It exhibits ferroelastic properties and has efficiency in stopping X-ray and gamma ray, which provides excellent environmental stability.
Used in bronzing, printing, photography, gold pencils, and mosaic gold.
Lead diiodide is prepared by mixing aqueous solutions of lead nitrate or lead acetate with an aqueous solution of potassium or sodium iodide or hydriodic acid, followed by crystallization. The product is purified by recrystallization.
Pb2+(aq) + 2Iˉ (aq) → PbI2(s).
Lead iodide appears as a yellow crystalline solid. Insoluble in water and denser than water. Primary hazard is threat to the environment. Immediate steps should be taken to limit spread to the environment. Used in printing and photography, to seed clouds and other uses.
Lead(II) iodide has weak oxidizing or reducing powers. Redox reactions can however still occur. The majority of compounds in this class are slightly soluble or insoluble in water. If soluble in water, then the solutions are usually neither strongly acidic nor strongly basic. These compounds are not water-reactive. Light sensitive
Lead diiodide is toxic if ingested. The symptoms are those of lead poisoning.
Early symptoms of lead intoxication via inhalation or ingestion are most commonly gastrointestinal disorders, colic, constipation, etc.; weakness, which may go on to paralysis, chiefly of the extensor muscles of the wrists and less often the ankles, is noticeable in the most serious cases. Ingestion of a large amount causes local irritation of the alimentary tract. Pain, leg cramps, muscle weakness, paresthesias, depression, coma, and death may follow in 1 or 2 days. Contact with eyes causes irritation.
Lead iodide is used in bronzing, gold
pencils; mosaic gold; printing, and photography
If this chemical gets into the eyes, remove anycontact lenses at once and irrigate immediately for at least15 min, occasionally lifting upper and lower lids. Seek medical attention immediately. If this chemical contacts theskin, remove contaminated clothing and wash immediatelywith soap and water. Seek medical attention immediately. Ifthis chemical has been inhaled, remove from exposure,begin rescue breathing (using universal precautions, including resuscitation mask) if breathing has stopped and CPR ifheart action has stopped. Transfer promptly to a medicalfacility. When this chemical has been swallowed, get medical attention. Give large quantities of water and inducevomiting. Do not make an unconscious person vomit.Antidotes and special procedures for lead: Persons with significant lead poisoning are sometimes treated with CaEDTA while hospitalized. This “chelating” drug causes arush of lead from the body organs into the blood and kidneys, and thus has its own hazards, and must be administered only by highly experienced medical personnel undercontrolled conditions and careful observation. Ca EDTA orsimilar drugs should never be used to prevent poisoningwhile exposure continues or without strict exposure control,as severe kidney damage can result.Note to physician: For severe poisoning BAL [British AntiLewisite, dimercaprol, dithiopropanol (C3H8OS2)] has beenused to treat toxic symptoms of certain heavy metals poisoning. In the case of lead poisoning it may have SOMEvalue. Although BAL is reported to have a large margin ofsafety, caution must be exercised, because toxic effects maybe caused by excessive dosage. Most can be prevented bypremedication with 1-ephedrine sulfate (CAS: 134-72-5).
Color Code—Blue: Health Hazard/Poison: Storein a secure poison location. Prior to working with thischemical you should be trained on its proper handling andstorage. Lead iodide must be stored to avoid contact withoxidizers (such as perchlorates, peroxides, permanganates,chlorates, and nitrates) and chemically active metals (suchas potassium, sodium, magnesium, and zinc), since violentreactions occur. A regulated, marked area should be established where this chemical is handled, used, or stored incompliance with OSHA Standard 1910.1045. Lead iodide isregulated by an OSHA Standard, 1910.1025. All requirements of the standard must be followed.
UN3288 Toxic solids, inorganic, n.o.s., Hazard
Class: 6.1; Labels: 6.1-Poisonous materials, Technical Name
Required. UN3077 Environmentally hazardous substances,
solid, n.o.s., Hazard class: 9; Labels: 9-Miscellaneous hazardous material, Technical Name Required
It crystallises from a large volume of water. The solubility in H2O is 1.1% at ~10o, and 3.3% at ~ 100o.
Lead iodide has weak oxidizing or
reducing powers. Redox reactions can however still occur.
The majority of compounds in this class are slightly soluble
or insoluble in water. If soluble in water, then the solutions
are usually neither strongly acidic nor strongly basic. These
compounds are not water-reactive. Light sensitive
Contact with oxidizers or active metals may cause violent
reaction
