A case of occupational contact dermatitis caused by
exposure to 2-hydroxypropyl acrylate was reported in
industry.
In manufacture of thermosetting resins for surface coatings.
Monomer used in manufacture of
thermosetting resins for surface coatings.
A functional monomer used in manufacture of thermosetting acrylic resins for surface coatings.
TLV: 0.5 ppm. Corrosive to skin and eyes.
Toxic by skin absorption.
2-Hydroxypropyl acrylate is an
irritant of the eyes, nose, respiratory tract, and
skin.
2- Hydroxypropyl acrylate is used as abifunctional monomer for acrylic resins; it is used as abinder in nonwoven fabrics and may be used in the produc-tion of detergent lube oil additives.
If this chemical gets into the eyes, remove anycontact lenses at once and irrigate immediately for at least15 min, occasionally lifting upper and lower lids. Seek med-ical attention immediately. If this chemical contacts theskin, remove contaminated clothing and wash immediatelywith soap and water. Seek medical attention immediately. Ifthis chemical has been inhaled, remove from exposure,begin rescue breathing (using universal precautions, includ-ing resuscitation mask) if breathing has stopped and CPR ifheart action has stopped. Transfer promptly to a medical .facility. When this chemical has been swallowed, get medi-cal attention. Give large quantities of water and do notinduce vomiting. Do not make an unconscious personvomit. Medical observation is recommended for 24- -48 hafter breathing overexposure, as pulmonary edema may bedelayed. As first aid for pulmonary edema, a doctor orauthorized paramedic may consider administering a cortico-steroid spray.
Color Code- White: Corrosive or Contact Hazard;Store separately in a corrosion-resistant location. Prior toworking with this chemical you should be trained on itsproper handling and storage. Before entering confined spacewhere 2-Hydroxypropyl acrylate may be present, check tomake sure that an explosive concentration does not exist.Store in tightly closed containers in a cool, well-ventilatedarea away from oxidizers and reducing agents. W here possi-ble, automatically pump liquid from drums or other storagecontainers to process containers.
Corrosive liquids, n.o.s. require a shipping labelof“CORROSIVE.”It falls in Hazard Class 8 and PackingGroup II.
2-Hydroxypropyl acrylate can polymer-ize due to heating, initiators, UV light. Can become unsta-ble at high temperatures and pressures or may react withwater with some release of energy but not violently. Reactswith oxidizers, strong acids, nitrates.
