Graphit

Bezeichnung:Graphit

CAS-Nr7782-42-5

Englisch Name:Graphite

CBNumberCB9369364

SummenformelC

Molgewicht12.01

MOL-Datei7782-42-5.mol

Synonyma

Graphit

Mineralischer Kohlenstoff

Graphit physikalisch-chemischer Eigenschaften

Schmelzpunkt	3652-3697 °C(lit.)
Siedepunkt	4830°C
Dichte	2.2 g/mL at 25 °C
chüttdichte	280kg/m3
storage temp.	no restrictions.
Löslichkeit	insoluble in H2O
Aggregatzustand	rod
Farbe	black
Wichte	2.25
PH	5-6 (50g/l, H2O, 20℃)(slurry)
Geruch (Odor)	Odorless
Biologische Quelle	rabbit
Widerstand (resistivity)	(Electrical resistivity: surface 0.06 Ω/sq, sheet 2.7 μΩ m)
Wasserlöslichkeit	Insoluble in water.
Halbleitereigenschaften	(mobility>2700cm2/V·s) (FET mobility)
Crystal Structure	Hexagonal
Sensitive	Air & Light Sensitive
Merck	13,4554
Dielectric constant	12.0（Ambient）
Expositionsgrenzwerte	ACGIH: TWA 2 mg/m3 OSHA: TWA 15 mg/m3; TWA 5 mg/m3 NIOSH: IDLH 1250 mg/m3; TWA 2.5 mg/m3
NIST chemische Informationen	Graphite(7782-42-5)
EPA chemische Informationen	Graphite (7782-42-5)

Sicherheit

Kennzeichnung gefährlicher	Xi,Xn
R-Sätze:	36/37-20
S-Sätze:	26-36-37/39-22
OEB	B
OEL	TWA: 2.5 mg/m3 (resp)
WGK Germany	1
RTECS-Nr.	MD9659600
TSCA	Yes
HS Code	3801 10 00
Giftige Stoffe Daten	7782-42-5(Hazardous Substances Data)
IDLA	1,250 mg/m3

Gefahreninformationscode (GHS)

Graphite Chemische Eigenschaften,Einsatz,Produktion Methoden

ERSCHEINUNGSBILD
SCHWARZE FLOCKEN, STüCKE, PULVERODER SPäNE.
PHYSIKALISCHE GEFAHREN
Staubexplosion der pulverisierten oder granulierten Substanz in Gemischen mit Luft möglich.
CHEMISCHE GEFAHREN
Starkes Reduktionsmittel. Reagiert mit Oxidationsmitteln.
ARBEITSPLATZGRENZWERTE
TLV: 2,0 mg/m?(als TWA); (Alveolengängige Fraktion); (ACGIH 2008).
MAK: 1,5 mg/m?(Alveolengängige Fraktion); 4 mg/m?(Einatembare Fraktion); Schwangerschaft: Gruppe C; (DFG 2008).
AUFNAHMEWEGE
Aufnahme in den Körper durch Inhalation.
INHALATIONSGEFAHREN
Verdampfen bei 20°C vernachlässigbar; eine belästigende Partikelkonzentration in der Luft kann jedoch schnell erreicht werden.
WIRKUNGEN NACH WIEDERHOLTER ODER LANGZEITEXPOSITION
Risiko der Lungenschädigung bei wiederholter oder längerer Staubexposition. mit nachfolgender Graphit-Pneumokoniose.
LECKAGE
Verschüttetes Material in Behältern sammeln; falls erforderlich durch Anfeuchten Staubentwicklung verhindern. Dann mit viel Wasser wegspülen. Reste mit viel Wasser wegspülen. Persönliche Schutzausrüstung: Atemschutzgerät, P1-Filter für inerte Partikel.
R-Sätze Betriebsanweisung:
R36/37:Reizt die Augen und die Atmungsorgane.
R20:Gesundheitsschädlich beim Einatmen.
S-Sätze Betriebsanweisung:
S26:Bei Berührung mit den Augen sofort gründlich mit Wasser abspülen und Arzt konsultieren.
S36:DE: Bei der Arbeit geeignete Schutzkleidung tragen.
S37/39:Bei der Arbeit geeignete Schutzhandschuhe und Schutzbrille/Gesichtsschutz tragen.
S22:Staub nicht einatmen.
Chemische Eigenschaften
soft dark grey solid
Chemische Eigenschaften
Graphite is crystallized carbon and usually appears as soft, black scales. There are two types of graph ite, natural and artificial (activated). Natural and synthetic graphite may be mixed with each other or contain other additives.
Occurrence
Graphite is usually found in metamorphic rocks as veins, lenses, and pockets and as thin laminae disseminated in gneisses, schists, and phyllites. Depending upon the mode of occurrence and origin, it is graded into three forms: flake graphite found in metamorphosed rocks as vein deposits, crystalline graphite found as fissure-filled veins, and cryptocrystalline graphite formed in metamorphosed coal beds. Natural graphite occurs in many parts of the world in fair abundance and it has been used in various applications.
In nature, graphite is found usually in association with feldspars, mica, quartz, pyroxene, rutile, pyrites, and apatite. These impurities are associated with vein graphite. The impurities with amorphous graphite are shale, slate, sandstone, quartz, and limestone. Graphite is found in almost every country, but Ceylon, Madagascar, Mexico, western Germany, and Korea all possess particularly plentiful reserves. Major industrial producers of graphite are South Korea, the largest producer in the world, followed by Austria.
Verwenden
For "lead" pencils, refractory crucibles, stove polish; as pigment, lubricant, graphite cement; for matches and explosives, commutator brushes, anodes, arc-lamp carbons, electroplating; polishing Compounds, rust and needle-paper; coating for cathode ray tubes; moderator in nuclear piles.
Verwenden
High-temperature lubricant, crucible container for handling molten metals such as Mg, Al, Zn, Ga, Sb, and Bi
Verwenden
Similar to those of natural graphite in refractories and electrical products
Verwenden
Graphite has been used alone to make refractory products for the lower blast furnace linings, and electrodes for steel and aluminum production. They are also commonly used in conjunction with other refractory raw materials. These materials are highly refractory nonwettable materials and are useful refractories in nonoxidizing environments. Carbon blacks are co
Definition
An allotrope of CARBON. Graphite is a good conductor of heat and electricity. The atoms are arranged in layers which cleave easily and graphite is used as a solid lubricant.
synthetische
Impervious graphite is manufactured by processing graphite at temperatures above 2000°C using Acheson furnaces, evacuating the pores, and impregnating with a phenolic resin. The impregnation seals the porosity.
Application
Flake graphite containing 80 to 85 wt.% C is used for crucible manufacture; 93 wt.% C and above is preferred for the manufacture of lubricants, and graphite with 40 to 70 wt.% C is used for foundry facings. Natural graphite, refined or otherwise pure, having a carbon content of not less than 95%, is used in the manufacture of carbon rods for dry battery cells.
The utility of graphite is dependent largely upon its type, i.e., flake, lumpy, or amorphous. The flake-type graphite is found to possess extremely low resistivity to electrical conductance. The electrical resistivity decreases with an increase in flaky particles. In addition, the bulk density decreases progressively as the particles become more and more flaky. Because of this property in flake graphite, it enjoys widespread use in the manufacture of carbon electrodes, plates, and brushes required in the electrical industry and dry-cell batteries.
Allgemeine Beschreibung
A mineral form of the element carbon. Hexagonal crystals or thin leaf-like layers. Steel-gray to black with a metallic luster and a greasy feel. An electrical conductor. Used for high-temperature crucibles, as a lubricant and in "lead" pencils.
Reaktivität anzeigen
GRAPHITE is non-flammable in bulk form, but combustible. A reducing agent. Mixtures of graphite dust and air are explosive when ignited.Reacts violently with very strong oxidizing agents such as fluorine, chlorine dioxide, and potassium peroxide. Almost inert chemically when in bulk form. Keep away from ignition sources and oxidizing agents.
Health Hazard
Pure synthetic graphite acts as an inert or nuisance dust.
Flammability and Explosibility
Non flammable
Industrielle Verwendung
Graphite is a form of carbon. It was formerlyknown as black lead, and when first used forpencils was called Flanders’ stone. It is a naturalvariety of elemental carbon with a grayishblackcolor and a metallic tinge.
Carbon and graphite have been used inindustry for many years, primarily as electrodes,arc carbons, brush carbons, and bearings.In the last decade or so, development ofnew types and emergence of graphite fibers asa promising reinforcement for high-performancecomposites have significantly increasedthe versatility of this family of materials.
mögliche Exposition
Natural graphite is used in foundry facings, steel making lubricants, refractories, crucibles, pencil “lead,” paints, pigments, and stove polish. Artificial graphite may be substituted for these uses with the excep tion of clay crucibles; other types of crucibles may be pro duced from artificial graphite. Additionally, it may be used as a high temperature lubricant or for electrodes. It is uti lized in the electrical industry in electrodes, brushes, con tacts, and electronic tube rectifier elements; as a constituent in lubricating oils and greases; to treat friction elements, such as brake linings; to prevent molds from sticking together; and in moderators in nuclear reactors. In addition, concerns have been expressed about synthetic graphite in fibrous form. Those exposed are involved in production of graphite fibers from pitch or acrylonitrile fibers and the manufacture and use of composites of plastics, metals, or ceramics reinforced with graphite fibers.
Versand/Shipping
UN1362 Carbon, activated, Hazard Class: 4.2; Labels: 4.2-Spontaneously combustible material, International.
läuterung methode
Treat graphite with hot 1:1 HCl. Then filter, wash and the dried powdered is heated in an evacuated quartz tube at 1000o until a high vacuum is obtained. Cool this and store it in an atmosphere of helium [Craig et al. J Phys Chem 60 1225 1956].
Inkompatibilitäten
Graphite is a strong reducing agent and reacts violently with oxidizers, such as fluorine, chlorine trifluoride, and potassium peroxide. Forms an explosive mixture with air. May be spontaneously combustible in air.
Waste disposal
Do not incinerate. Carbon (graphite) fibers are difficult to dispose of by incineration. Waste fibers should be packaged and disposed of in a land fill authorized for the disposal of special wastes of this nature, or as otherwise may be required by law.

Graphite Upstream-Materialien And Downstream Produkte

Graphit Anbieter Lieferant Produzent Hersteller Vertrieb Händler.

7782-42-5, Graphite Verwandte Suche:

Send Inquriy