12069-69-1

Raw materials And Preparation Products

Hazard Information

Material Safety Data Sheet(MSDS)

Questions And Answer

• Malachite

  Cupric carbonate basic exhibits the color of malachite green, thus being called malachite, being a precious mineral gem. It is product produced from the reaction between copper and the oxygen, carbon dioxide and water in the air, also known as copper rust with green color. When being heated in the air, it will be broken down into copper oxide, water and carbon dioxide. It is soluble in acid and can generate the corresponding copper salt. It is also soluble in the aqueous solution of cyanide, ammonium salt and alkali metal carbonate to form copper complex. When being boiled in water or heated in alkaline solution, it can generate brown copper oxide. At 200 ℃, it can be decomposed into black copper oxide. It is very unstable under hydrogen sulfide atmosphere and can have reaction with hydrogen sulfide to generate copper sulfide. Cupric carbonate basic, according to the ratio difference of CuCO3 over H2O, has a dozen different forms of compounds. It is existed in the form of malachite in nature in the form of malachite.
  When being placed in the air for a long time, it will absorb moisture and release carbon dioxide, slowly turning into the green malachite composition. In nature, it is existed in the form of blue copper.
  Copper carbonate and cupric carbonate basic are actually not presented. The addition of sodium carbonate to the dilute copper sulfate solution, or the introduction of carbon dioxide into the suspension of copper hydroxide can both give the precipitate of cupric carbonate basic. Cupric carbonate basic can be seen as consisting of the copper hydroxide and copper carbonate. Actually there are two types of copper hydroxides with both combination with one copper carbonate and two copper carbonates.
  The former one has the chemical formula of CuCO3 • Cu (OH) 2, being a monoclinic crystal fiber-like clusters, or dark green powder. The resulting precipitate from the solution was initially green and, after standing, turned dark green in solution. It is toxic, being the major components in the green rust (commonly known as copper green) generated in the copper surface.
  The latter one has a chemical formula of 2CuCO3 • Cu (OH) 2, being dark sky blue, being very bright monoclinic crystal, or compact crystal clumps. It is insoluble in water, soluble in ammonia and hot and concentrated sodium bicarbonate solution and can turn into blue color. It can be decomposed at 300 °C.
  Basic copper carbonate can be used to manufacture signal flares, pyrotechnics, paint pigments, other copper salts, solid phosphor activators, pesticides, seed treatment and as fungicides and antidotes as well as used for plating and so on.;

• Solubility in water (g / 100ml)

  Solubility in 100 ml of water (grams):
  1.462 × 10-4/20 ° C;

• Toxicity

  For harmful effects of excess amount of copper, the reaction between Cu2+ with the enzyme hydrogen sulfide plays a central role, drinking of water containing 44 mg /L copper can lead to the occurrence of acute gastroenteritis. Oral administration of copper salt for 0.2~0.5 g can cause vomiting with l~2 g being able to cause severe vomiting and sometimes can lead to fatal poisoning. Chronic poisoning is manifested as nervous system dysfunction, liver and kidney dysfunction, nasal septum ulcers and perforation. The facial skin, hair and conjunctiva sometimes can become light yellow green or light green. Dust and solution can both irritate the eyes and mucous membranes.
  The maximum allowable concentration of copper metal is 1 mg/m3; for copper oxide, the value is 0.1 mg/m3.
  Upon copper poisoning, the patients can be subject to oral treatment with 0.1% K4 [Fe (CN) 6] solution for gastric lavage, or oral administration of protein water, magnesia laxative; upon abdominal paining, the patients can be subject to subcutaneous injection of 1 mL of 0.1% atropine sulfate; upon eye irritation, we can use water to rinse.
  Upon working, we should wear protective masks, protective glasses and dust uniforms.;

• Chemical properties

  It appears as peacock green small amorphous powder. It can’t be dissolved in cold water and alcohol, being soluble in acid to form the corresponding copper salt. It is soluble in the cyanide, ammonia, ammonium salt and alkali metal carbonate aqueous solution.;

• Uses

  It can be applied to the fields of pyrotechnics, pesticides, pigments, feed, fungicides, preservatives and other industries for the manufacturing of copper compounds.
  It can be applied to analysis reagents and pesticides
  It can be applied to organic catalysts, pyrotechnics and pigments. In the field of agriculture, it can be used for the prevention of plants smut, as the poisoning antidote for insecticides and phosphorus poison antidote as well as the germicide of the seeds; being mixed with asphalt can prevent animal husbandry and wild rat from eating seedlings; it can be applied to feed as the copper additive. In the crude oil storage, it can be used as alkali agent and the raw material for the production of copper compounds. It can also be used for electroplating, corrosion and analysis reagents.
  It can be applied to paint color, pyrotechnics, pesticides, seed treatment germicide and for preparation of other copper salts. It can also be used as solid fluorescent powder activator.;

• Production method

  Copper sulfate method; formulate the baking soda into solution of relative density of 1.05, first add to the reactor, at 50 ° C, under stirring, add refined copper sulfate solution and control the reaction temperature of 70~80 ° C. The reaction takes the change of the precipitate color to peacock green as the turning point with the pH being maintained at 8. After the stopping of the reaction, after standing and sedimentation, use 70~80 ℃ water or no ion-water to wash to until the lotion has no SO42-anymore, followed by centrifugal separation, drying to obtain the finished product of cupric carbonate base. The reaction is:
  2CuSO4 + 4NaHCO3 → CuCO3 • Cu (OH) 2 + 2Na2SO4 + 3CO2 ↑ + H2O
  Copper nitrate: after the electrolytic copper is reacted with concentrated nitric acid to produce copper nitrate, and then have reaction with the mixture solution of sodium carbonate and sodium bicarbonate to generate cupric carbonate basic. The precipitate is subjecting to washing, separation and dehydration, drying to yield the final products. The reaction processes are:
  Cu + 4HNO3 → Cu (NO3) 2 + 2NO2 ↑ + 2H2O
  2Cu (NO3) 2 + 2Na2CO3 + H2O → CuCO3 • Cu (OH) 2 + 4NaNO3 + CO2 ↑
  2Cu (NO3) 2 + 4NaHCO3 → CuCO3 • Cu (OH) 2 + 4NaNO3 + 3CO2 ↑ + H2O;

• Category

  Pesticides;

• Toxic grading

  poisoning;

• Acute Toxicity

  Oral-Rat LD50: 1350 mg/kg;

• Flammability and hazardous properties

  it is non-combustible with combustion yielding toxic copper-containing fumes;;

• Storage and transport characteristics

  Treasury at low temperature, ventilation, dry;

• Fire extinguishing agent

  water, carbon dioxide, dry powder, and sand;

• Professional Standard

  TWA 1 mg/m3; STEL 3 mg/m3;

Well-known Reagent Company Product Information

Supplier

Related Products