4-플루오로에틸렌카보네이트

한글명:4-플루오로에틸렌카보네이트

카스 번호114435-02-8

상품명:Fluoroethylene carbonate

CBNumberCB9420252

분자식C3H3FO3

포뮬러 무게106.05

MOL 파일114435-02-8.mol

동의어(한글)

4-플루오로에틸렌카보네이트

4-플루오로-1,3-다이옥솔레인-2-온

4-플루오르-1,3-다이옥솔라-2-논

화학적 성질

녹는점	18-23 °C
끓는 점	212℃
밀도	1.454
증기압	51Pa at 25℃
굴절률	1.3960 to 1.4000
인화점	>102°(216°F)
저장 조건	2-8°C
물리적 상태	액체
색상	무색의
수용성	물과 약간 섞임.
InChI	InChI=1S/C3H3FO3/c4-2-1-6-3(5)7-2/h2H,1H2
InChIKey	SBLRHMKNNHXPHG-UHFFFAOYSA-N
SMILES	O1CC(F)OC1=O
LogP	-0.435 at 20.1℃
CAS 데이터베이스	114435-02-8(CAS DataBase Reference)
EPA	1,3-Dioxolan-2-one, 4-fluoro- (114435-02-8)

위험 및 안전 성명

위험품 표기

위험 카페고리 넘버

22-36/38-43-48/22

안전지침서

26-36/37

WGK 독일

TSCA

Yes

HS 번호

29329990

NFPA 704:

	1
2		0

그림문자(GHS)

4-플루오로에틸렌카보네이트 화학적 특성, 용도, 생산

화학적 성질
Colorless liquid
용도
4-Fluoro-1,3-dioxolan-2-one is used as an electrolyte additive in lithium ion batteries. It also enables the formation of thin, smooth and stable passive solid electrolyte interphase (SEI) layer, which increases the cycling efficiency and discharge capacity retention of the secondary battery. Further, it is used as an intermediate in organic synthesis.
제조 방법
The preparation of Fluoroethylene carbonate is as follows:Add 114g of liquid ethylene carbonate at 50, 1.14g of palladium acetate (II) and 114g of dry acetonitrile (water 100ppm) to a 500ml Monel reactor containing the monophenyl iodine difluoride prepared in step (1) , Stir at 50°C for 0.5h, raise the temperature to 70°C and react for 5h (the molar ratio of ethylene carbonate to hydrogen fluoride in step (1) is 1.1:2.5, the molar ratio of ethylene carbonate to acetonitrile is 1.1:2.8, palladium acetate (II) The dosage is 1.0% of the mass of ethylene carbonate). The tail gas during the reaction was absorbed by potassium hydroxide solution with a mass fraction of 10%. After the reaction, vacuum distillation was carried out under the condition of 3mmHg. The 65-71°C fraction was collected to obtain 103.3g of fluoroethylene carbonate with a GC content of 99.3%. The yield of FEC was 75%.
일반 설명
Fluoroethylene carbonate (FEC) can be used as a co-solvent for the formation of electrolytes, which can exhibit a reversible capacity of 2.5 Ah g?1. It can be further used in the fabrication of lithium-ion batteries. FEC enables the formation of thin, smooth and stable passive solid electrolyte interphase (SEI) layer, which is insoluble in the electrolyte, in turn increasing the cycling efficiency and discharge capacity retention of the secondary battery.
참고 문헌
[1] Yanting Jin. “Understanding Fluoroethylene Carbonate and Vinylene Carbonate Based Electrolytes for Si Anodes in Lithium Ion Batteries with NMR Spectroscopy.” Journal of the American Chemical Society 140 31 (2018): 9854–9867.
[2] Rod McMillan. “Fluoroethylene carbonate electrolyte and its use in lithium ion batteries with graphite anodes.” Journal of Power Sources 81 (1999): Pages 20-26.

4-플루오로에틸렌카보네이트 준비 용품 및 원자재

4-플루오로에틸렌카보네이트 공급 업체

4-플루오로에틸렌카보네이트 관련 검색

Send Inquriy