Diphosphorsäuretetrakis-(phenylmethyl)ester

Bezeichnung:Diphosphorsäuretetrakis-(phenylmethyl)ester

CAS-Nr990-91-0

Englisch Name:Tetrabenzyl pyrophosphate

CBNumberCB9300303

SummenformelC28H28O7P2

Molgewicht538.47

MOL-Datei990-91-0.mol

Synonyma

Diphosphorsäuretetrakis-(phenylmethyl)ester

Diphosphorsäuretetrakis-(phenylmethyl)ester physikalisch-chemischer Eigenschaften

Schmelzpunkt	63-66 °C (lit.)
Siedepunkt	601.6±55.0 °C(Predicted)
Dichte	1.289±0.06 g/cm3(Predicted)
Dampfdruck	0.001Pa at 140℃
storage temp.	-20°C
Löslichkeit	Chloroform (Slightly), Methanol (Slightly)
Aggregatzustand	Powder or Crystalline Powder
Farbe	White to off-white
Wasserlöslichkeit	Slightly soluble in water.
Sensitive	Moisture Sensitive
BRN	2068292
InChI	InChI=1S/C28H28O7P2/c29-36(31-21-25-13-5-1-6-14-25,32-22-26-15-7-2-8-16-26)35-37(30,33-23-27-17-9-3-10-18-27)34-24-28-19-11-4-12-20-28/h1-20H,21-24H2
InChIKey	NSBNXCZCLRBQTA-UHFFFAOYSA-N
SMILES	P(=O)(OCC1C=CC=CC=1)(OCC1C=CC=CC=1)OP(=O)(OCC1C=CC=CC=1)OCC1C=CC=CC=1
CAS Datenbank	990-91-0(CAS DataBase Reference)

Sicherheit

Kennzeichnung gefährlicher	C
R-Sätze:	34
S-Sätze:	26-36/37/39-45
RIDADR	UN 3261 8/PG 2
WGK Germany	3
F	10-21
HazardClass	8
PackingGroup	II
HS Code	29209090

Gefahreninformationscode (GHS)

Tetrabenzyl pyrophosphate Chemische Eigenschaften,Einsatz,Produktion Methoden

R-Sätze Betriebsanweisung:
R34:Verursacht Verätzungen.
S-Sätze Betriebsanweisung:
S26:Bei Berührung mit den Augen sofort gründlich mit Wasser abspülen und Arzt konsultieren.
S36/37/39:Bei der Arbeit geeignete Schutzkleidung,Schutzhandschuhe und Schutzbrille/Gesichtsschutz tragen.
S45:Bei Unfall oder Unwohlsein sofort Arzt zuziehen (wenn möglich, dieses Etikett vorzeigen).
Chemische Eigenschaften
White Solid
Charakteristisch
Tetrabenzyl pyrophosphate and diphenylphosphinic anhydride, with two phosphoryl groups (P O) as ligating sites, can be used as novel ionophores to make Pb2+-selective membrane electrodes. A good result was obtained with tetrabenzyl pyrophosphate, and the electrode based on this ionophore and bis(1-butylpentyl) adipate as a solvent mediator in a poly(vinyl chloride) membrane matrix exhibited a near-Nernstian response to Pb2+ in the concentration range of 1×10?5–1×10?2 M with a slope of 28.7 mV per concentration decade in a solution containing 0.1 M Mg(NO3)2. Tetrabenzyl pyrophosphate showed the best response to Pb2+, almost free from interference by other metal cations. By adding the ionic additive potassium tetrakis(p-chlorophenyl)borate (KTpClPB; 40 mol% relative to tetrabenzyl pyrophosphate), a drastic change occurred in the electrode response, showing a monovalent species probably due to the formation of PbA+, where A stands for anions present in the sample solution, and decreased the selectivity of the electrode to other metal cations[1].
Verwenden
Phosphorylating reagent.
Verwenden
Tetrabenzyl pyrophosphate is used in the preparation of phosphoryl derivatives of shikimic acid in the presence of LDA. It is used in the preparation of dibenzyl phosphoro fluoridate in the presence of cesium fluoride as a catalyst. It is also used as a precursor in pharmaceuticals and involved in the phosphorylation of inositol derivatives.
synthetische
The production of tetrabenzyl pyrophosphate by the action of acyl chlorides on dibenzyl hydrogen phosphate, and a novel reaction of tetraphenyl pyrophosphate.
Preparation of Tetrabenzyl Pyrophosphate: A flask fitted with a nitrogen inlet, overhead stirrer, teflon-coated thermocouple probe, and pressure-equalizing addition funnel was charged with 350 milliliters of dry (water content ≦50 μg/mL), peroxide-free tetrahydrofuran, followed by 50.0 grams (174 millimoles) of dibenzylphosphoric acid (DBP), and the resulting mixture was stirred until the solid dissolved (about 10-15 minutes). A solution of 18.9 grams (91.6 millimoles) of dicyclohexylcarbodiimide (DCC) in 215 milliliters of THF was added from the addition funnel to a stirred, cooled (water-bath) solution of DBP at a rate to maintain the temperature at about 20°-25° C. The reaction is slightly exothermic and the addition took about 30 minutes. Within minutes, a precipitate of dicyclohexylurea formed in the mixture. Stirring was continued for about 2 hours at 20°-25° C. The reaction was monitored by HPLC assay using VYDAC C-18 (300A, 4.6×250 mm) column with water (0.02M KH2PO4) acetonitrile as eluent. The reaction was complete in about 1 hour (assay showing <2 percent unreacted DBP). The mixture was then filtered while excluding moisture to remove dicyclohexylurea. The filter cake was washed with two 25 milliliter portions of THF. The solution when assayed by HPLC showed 45.9 grams (98 percent) yield of tetrabenzyl pyrophosphate (TBPP) in 620 milliliters of THF (0.137M). The filtrate was then stored at 0° C. with exclusion of moisture until the next step.
Einzelnachweise
[1] Dafeng Xu, Takashi Katsu. “Tetrabenzyl pyrophosphate as a new class of neutral carrier responsive to lead ion.” Talanta 51 2 (2000): Pages 365-371.

Tetrabenzyl pyrophosphate Upstream-Materialien And Downstream Produkte

Diphosphorsäuretetrakis-(phenylmethyl)ester Anbieter Lieferant Produzent Hersteller Vertrieb Händler.

990-91-0, Tetrabenzyl pyrophosphate Verwandte Suche:

Send Inquriy