Diphenylazidophosphat

Bezeichnung:Diphenylazidophosphat

CAS-Nr26386-88-9

Englisch Name:Diphenylphosphoryl azide

CBNumberCB3404964

SummenformelC12H10N3O3P

Molgewicht275.2

MOL-Datei26386-88-9.mol

Synonyma

Diphenylazidophosphat

Diphenylazidophosphat physikalisch-chemischer Eigenschaften

Siedepunkt	157 °C/0.17 mmHg (lit.)
Dichte	1.277 g/mL at 25 °C (lit.)
Brechungsindex	n20/D 1.551(lit.)
Flammpunkt	>230 °F
storage temp.	2-8°C
Löslichkeit	Acetonitrile (Slightly), Chloroform (Slightly), Ethyl Acetate (Sparingly)
Aggregatzustand	Liquid
Wichte	1.277
Farbe	slightly yellow
Wasserlöslichkeit	insoluble
Hydrolytic Sensitivity	7: reacts slowly with moisture/water
BRN	2058967
Stabilität	Stable. Incompatible with acids, strong oxidizing agents.
InChIKey	SORGEQQSQGNZFI-UHFFFAOYSA-N
CAS Datenbank	26386-88-9(CAS DataBase Reference)
NIST chemische Informationen	Diphenylphosphoryl azide(26386-88-9)

Sicherheit

Kennzeichnung gefährlicher	T
R-Sätze:	23/24/25-36/37/38
S-Sätze:	26-36/37/39-45
RIDADR	UN 3278 6.1/PG 2
WGK Germany	3
F	3-10
Hazard Note	Toxic/Keep Cold
TSCA	No
HazardClass	6.1
PackingGroup	III
HS Code	29299000

Gefahreninformationscode (GHS)

Diphenylphosphoryl azide Chemische Eigenschaften,Einsatz,Produktion Methoden

R-Sätze Betriebsanweisung:
R23/24/25:Giftig beim Einatmen, Verschlucken und Berührung mit der Haut.
R36/37/38:Reizt die Augen, die Atmungsorgane und die Haut.
S-Sätze Betriebsanweisung:
S26:Bei Berührung mit den Augen sofort gründlich mit Wasser abspülen und Arzt konsultieren.
S36/37/39:Bei der Arbeit geeignete Schutzkleidung,Schutzhandschuhe und Schutzbrille/Gesichtsschutz tragen.
S45:Bei Unfall oder Unwohlsein sofort Arzt zuziehen (wenn möglich, dieses Etikett vorzeigen).
Chemische Eigenschaften
Diphenylphosphoryl azide (DPPA) is a colorless or pale yellow liquid which boils at 134-136 °C/0.2 mmHg, and it will be stable at room temperature under shading. It is non-explosive just like the other phosphorazidate. When DPPA is stored at room temperature for a long time, it might be slowly and partially hydrolyzed with moisture in air to produce diphenyl phosphate and toxic explosive hydrazoic acid. In this case, it will be recommended to use after washing DPPA with aqueous sodium hydrogen carbonate followed by drying.
Verwenden
Diphenylphosphoryl azide (DPPA or diphenyl phosphorazidate, (PhO)2P(O)N3) is a very toxic and potentially explosive organic compound. DPPA has been found to be effective for a variety of organic reactions as a versatile synthetic reagent. It is widely used in synthesis of other organic compounds especially as a reagent for the synthesis of peptides by virtue of its reactions with carboxylic acids leading to either the urethane or the amide.
synthetische
Diphenylphosphoryl azide (DPPA) is easily prepared in high yield by the reaction of the corresponding chloride with sodium azide in acetone. Combination of sodium azide and 18-crown-6 in the same reaction was reported, and the use of a quaternary ammonium salt as a phase-transfer catalyst in a biphasic phase of water and an organic solvent was also reported to be effective, as shown in Scheme 3.

Diphenyl Phosphorazidate (DPPA) - More Than Three Decades Later
Takayuki Shioiri
Graduate School of Environmental and Human Sciences, Meijo University
Application
Diphenylphosphoryl azide (DPPA) is a well-known azide reagent used in peptide couplings, Curtius rearrangements, and Mitsunobu inversions—is often encountered in pharmaceutical process development because it enables the most direct route to a desired product. Diphenylphosphonic azide acts as a reagent for the synthesis of peptides and phosphoramidates by reacting with amines. It is also used in the preparation of oligosaccharides linked with carbamate and urea bonds utilizing modified Curtis rearrangement. It is involved in pseudohalogen replacement of the azido group by treatment with nucleophilic reagents, such as water, butanol, ammonia, and various amines. Further, it is used as a hydroazidation catalyst for preparation of organoazides.
Reaktionen
Diphenylphosphoryl azide, originally developed by Yamada in 1972, has shown significant synthetic versatility, being used in isocyanate synthesis, especially in the Curtius rearrangement, stereospecific conversion of alcohol into azide, as a coupling reagent in macrolactamization[4], in allylic amine synthesis, and in aziridination reactions. Diphenylphosphoryl azide, also called DPPA, diphenyl phosphorazidate or phosphoric acid diphenyl ester azide, is a colorless liquid with high boiling point (157 ??C/0.17 mmHg), and can be easily prepared by the reaction between diphenylphosphoryl chloride and sodium azide in acetone in high yield. The Waldvogel group developed a reliable protocol for the large-scale (100 g) synthesis of DPPA, including purification by reduced-pressure distillation (Picture 1). A polymer-supported form of the reagent has also been developed using phenol resin by the Taylor group.
Mechanism of action
Diphenyl phosphoryl azide is used in the aziridination of olefins catalyzed by colbalt-tetraphenylporphyrin. It is also used as the activating agent in the preparation of macrocyclic lactams and of an aldose reductase inhibitor.

Diphenylphosphoryl azide Upstream-Materialien And Downstream Produkte

Diphenylazidophosphat Anbieter Lieferant Produzent Hersteller Vertrieb Händler.

26386-88-9, Diphenylphosphoryl azide Verwandte Suche:

Send Inquriy