Melphalan

Gefahreninformationscode (GHS)

• Bildanzeige (GHS)

  

• Alarmwort

  Achtung

• Gefahrenhinweise

  H300：Lebensgefahr bei Verschlucken.

  H317：Kann allergische Hautreaktionen verursachen.

  H340：Kann genetische Defekte verursachen.

  H350：Kann Krebs verursachen.

  H361：Kann vermutlich die Fruchtbarkeit beeinträchtigen oder das Kind im Mutterleib schädigen.

• Sicherheit

  P201：Vor Gebrauch besondere Anweisungen einholen.

  P280：Schutzhandschuhe/Schutzkleidung/Augenschutz tragen.

  P302+P352：BEI BERÜHRUNG MIT DER HAUT: Mit viel Wasser/... (Hersteller kann, falls zweckmäßig, ein Reinigungsmittel angeben oder, wenn Wasser eindeutig ungeeignet ist, ein alternatives Mittel empfehlen) waschen.

Melphalan Chemische Eigenschaften,Einsatz,Produktion Methoden

• R-Sätze Betriebsanweisung:

  R45:Kann Krebs erzeugen.
  R46:Kann vererbbare Schäden verursachen.
  R26/27/28:Sehr giftig beim Einatmen, Verschlucken und Berührung mit der Haut.
  R63:Kann das Kind im Mutterleib möglicherweise schädigen.

• S-Sätze Betriebsanweisung:

  S53:Exposition vermeiden - vor Gebrauch besondere Anweisungen einholen.
  S22:Staub nicht einatmen.
  S36/37/39:Bei der Arbeit geeignete Schutzkleidung,Schutzhandschuhe und Schutzbrille/Gesichtsschutz tragen.
  S45:Bei Unfall oder Unwohlsein sofort Arzt zuziehen (wenn möglich, dieses Etikett vorzeigen).

• Beschreibung

  Melphalan is a nitrogen mustard derivative of the large neutral amino acid L-phenylalanine. It was first synthesized in 1953 by Bergel and Stock and is the active L-isomer of the compound. The D-isomer, known as medphalan, is less active against certain animal tumors, and the dose needed to produce effects on chromosomes is larger than that required with the L-isomer. The racemic (DL-) form is known as merphalan or sarcolysin.

• Beschreibung

  Melphalan is a phenylalanine derivative of mechlorethamine, belonging to the family of nitrogen mustard alkylating agents that are used for chemotherapy. It attaches an alkyl group to guanine bases in DNA at the 7-nitrogen of the imidazole ring, which leads to DNA interstrand and intrastrand crosslinks, cytotoxicity, and apoptosis. Melphalan can inhibit the growth of PC-3 prostate cancer cells with IC₅₀ values of 0.074 or 0.77 μM for sequential dosing or single dosing, respectively.

• Chemische Eigenschaften

  Melphalan forms solvated crystals from methanol.

• Chemische Eigenschaften

  Crystalline Solid

• Originator

  Alkeran,Burroughs-Wellcome,US,1964

• Verwenden

  Melphalan USP (Alkeran) is used to treat multiple myeloma; plasmacytic myeloma; cancer of breast and ovary.

• Verwenden

  antineoplastic, alkylating agent

• Verwenden

  Glucocorticoid

• Indications

  Melphalan (Alkeran) is an amino acid derivative of mechlorethamine that possesses the same general spectrum of antitumor activity as do the other nitrogen mustards. However, the bioavailability of the oral preparation is quite variable (25–90%) from one patient to another.
  The major indications for melphalan are in the palliative therapy of multiple myeloma and cancers of the breast or ovary. Because it does not produce alopecia, melphalan is occasionally substituted for cyclophosphamide in the CMF regimen for breast cancer.
  Melphalan produces less nausea and vomiting than does cyclophosphamide; however, its bone marrow suppression tends to be more prolonged and affects both white cells and platelets. Peak suppression of blood counts occurs 14 to 21 days after a 5-day course of drug therapy; recovery is generally complete within 3 to 5 weeks.

• Definition

  ChEBI: A phenylalanine derivative comprising L-phenylalanine having [bis(2-chloroethyl)amino group at the 4-position on the phenyl ring.

• Manufacturing Process

  Diethyl sodium phthalimidomalonate (Barger and Weichselbaum, Organic Syntheses, 1943, Coll. Vol. II, 384) (6.52 g) was dissolved in boiling methyl ethyl ketone (80 ml) and a solution of p-nitrobenzyl chloride (3.44 g; 1.0 mol) in the same solvent (20 ml) was added, Sodium iodide (ca 0.5 g) dissolved in hot methyl ethyl ketone (10 ml) was introduced, and produced an immediate precipitation. The mixture was refluxed for 1.5 hours, cooled, filtered, evaporated under vacuum and the residual gum crystallized from ethanol. The di-ethyl-p-nitrobenzyl-phthalimidomalonate formed colorless prisms (88%), MP 103° to 105°C, sharpening to 104° to 105°C on recrystallizing from ethanol.
  Diethyl-p-nitrobenzyl-phthalimidomalonate (70 g) and sodium carbonate (70 g) in water (700 ml) were refluxed overnight with mechanical stirring (to avoid bumping). The clear brown solution was acidified with hydrochloric acid and refluxing and stirring were continued for a further 40 minutes. The mixture was cooled and the colorless precipitate (31 g) collected. A second crop (18.5 g) was obtained on evaporation of the mother liquors. Crystallization from aqueous ethanol gave the compound N-carboxybenzoyl-p-nitro-DL-phenylalanine as small needles, MP 198° to 200°C.
  The N-carboxybenzoyl compound (2.7 g) was refluxed for 30 minutes with acetic anhydride (10 ml), the mixture taken to dryness (vacuum) and the residue heated with water. The cooled gummy product became granular on rubbing and crystallized from methyl ethyl ketone-petrol or aqueous ethanol in almost colorless needles, MP 184° to 186°C, of p-nitro-N-phthaloyl-DLphenylalanine.
  A solution of p-nitro-N-phthaloyl-DL-phenylalanine (1.0 g) in methanol (25 ml) and a solution of cinchonidine (0.865 g) in methanol (30 ml) were mixed. Crystallization soon set in. The mixture was left overnight, and the colorless needles (0.97 g), MP 209° to 210°C, collected. After two recrystallizations from methanol the cinchonidine salt of the D-acid had MP 211°C.
  Evaporation of the mother liquors from the original cinchonidine experiment gave a gum which crystallized readily from aqueous ethanol in almost colorless needles (0.73 g), MP 191° to 192.5°C. Two recrystallizations from aqueous ethanol gave the cinchonidine salt of the L-acid, MP 192.5° to 194°C. To the salt (2.9 g) in warm ethanol (50 ml) was added water (50 ml) and a slight excess (ca 10 ml) of N aqueous sodium hydroxide. The mixture was diluted with water, cooled, filtered from the precipitated base and the filtrate acidified with hydrochloric acid. Refluxing with 2 N ethanolic hydrogen chloride yielded p-nitro-N-phthaloyl-L-phenylalanine ethyl ester, according to US Patent 3,032,585.
  Then, as described in US Patent 3,032,584, ethyl N-phthaloyl pnitrophenylalaninate (9.0 g) was hydrogenated in a mixture of ethyl acetate (120 g) and methanol (80 g) with a palladium-calcium carbonate (1% Pd) catalyst (1.4 g). When gas uptake was complete, the filtrate from the hydrogenation mixture was evaporated under reduced pressure. The residual gum was taken up in ether, the solution filtered, and a slight excess of a dry ethereal hydrogen chloride solution added slowly with stirring. The gummy precipitate became granular on rubbing and the ether-washed product was crystallized from ethyl acetate-acetone [1st crop, 2.8 g, MP 188° to 192°C (decomp.); 2nd crop, 3.9 g, MP 189° to 192°C (decomp.)] . Part of the first batch was recrystallized from ethyl acetate and gave very slightly tinted needles, MP 188° to 190°C (decomp.) of ethyl N-phthaloyl paminophenylalaninate hydrochloride.
  The free base was obtained from the hydrochloride by adding a slight excess of dilute ammonium hydroxide to the aqueous solution, and crystallizing the product from aqueous methanol. A further recrystallization with charcoal treatment gave almost colorless needles, MP 110° to 112°C of ethyl Nphthaloyl p-aminophenylalaninate.
  Ethyl N-phthaloyl p-aminophenylalaninate (3.15 g)

• Trademarks

  Alkeran (GlaxoSmithKline).

• Therapeutic Function

  Cancer chemotherapy

• Allgemeine Beschreibung

  Melphalan is available in 2-mg tablets and 50-mg vials fororal and IV administration, respectively in the treatment ofmultiple myeloma, breast and ovarian cancer, and in highdosetherapy when bone marrow transplant is being utilized.The mechanisms of resistance are the same as those seen formechlorethamine. The agent is poorly absorbed when givenby the oral route. Melphalan is highly plasma protein bound(80%–90%) and inactivated in the blood by water to givethe hydroxy metabolites. Elimination occurs primarily in thefeces with an elimination half-life of 38 to 108 minutes. Thecommonly seen adverse effects are myelosuppression, nausea,and vomiting. Nausea is normally mild with normal doses butbecomes severe when high doses are used during bone marrowtransplant. Less commonly seen adverse effects are hypersensitivityreactions, skin rash, and alopecia. Secondarycancers are also of concern with the use of the agent.

• Allgemeine Beschreibung

  White to buff-colored powder. Odorless or with a faint odor. An antineoplastic medicine.

• Air & Water Reaktionen

  Insoluble in water.

• Reaktivität anzeigen

  Melphalan is a nitrogen mustard. May be incompatible with isocyanates, halogenated organics, peroxides, phenols (acidic), epoxides, anhydrides, and acid halides. Flammable gaseous hydrogen may be generated in combination with strong reducing agents, such as hydrides.

• Hazard

  Strong irritant to eyes and mucous membranes. Confirmed carcinogen.

• Brandgefahr

  Flash point data are not available for Melphalan; however Melphalan is probably combustible.

• Mechanism of action

  Melphalan is orally active, but absorption can be erratic. Absorption is decreased with food, but dosing regimens do not demand an empty stomach. The drug can be formulated for IV administration, but the risk of serious side effects is higher. Melphalan distributes into body water, so toxicity can be pronounced in dehydrated patients or in those with renal dysfunction. Dehydration can be corrected, but dosage adjustments should be considered in patients with renal disease.

• Clinical Use

  This aromatic mustard, used primarily in the treatment of multiple myeloma, is able to stabilize the lone pair of electrons on the mustard nitrogen through resonance with the conjugated phenyl ring, slowing the formation of the reactive aziridinium ion.

• Nebenwirkungen

  Because the lone pair of electrons of melphalan (and other aromatic mustards) is less reactive, there is a greater opportunity for distribution to cancer cells and a decreased incidence of severe side effects. There is a lower incidence of nausea and vomiting compared to mechlorethamine, but patients still experience myelosuppression, which can be severe. This drug also is mutagenic and can induce leukemia.

• Sicherheitsprofil

  Confirmed human carcinogen producing leukemia and Hodgkin's disease. Poison by ingestion, intravenous, and intracerebral routes. Human systemic effects by ingestion: nausea, hypermothty, diarrhea, agranulocytosis, thrombocytopenia. Human reproductive effects by ingestion: menstrual changes. Mutation data reported. A skin irritant. Used as a poison gas. When heated to decomposition it emits toxic fumes of ClandNOx.

• Synthese

  Melphalan, L-3-[p-[bis-(2-chloroethyl)amino]phenyl]alanine (30.2.1.13), is a structural analog of chlorambucil in which the butyric acid fragment is replaced with an aminoacid fragment, alanine. This drug is synthesized from L-phenylalanine, the nitration of which with nitric acid gives 4-nitro-L-phenylalanine (30.2.1.8). Reacting this with an ethanol in the presence of hydrogen chloride gives the hydrochloride of 4-nitro-L-phenylalanine ethyl ester (30.2.1.9), the amino group of which is protected by changing it to phthalamide by a reaction with succinic anhydride to give 30.2.1.10. The nitro group in this molecule is reduced to an amino group using palladium on calcium carbonate as a catalyst. The resulting aromatic amine (30.2.1.11) is then reacted with ethylene oxide, which forms a bis-(2- hydroxyethyl)-amino derivative (30.2.1.12). The hydroxy groups in this molecule are replaced with chlorine atoms upon reaction with thionyl chloride, after which treatment with hydrochloric acid removes the phthalamide protection, giving melphalan (30.2.13).

  

• mögliche Exposition

  An alkylating agent. Healthcare workers may be exposed. As a drug it is an immunosuppressant, used in the treatment of multiple myeloma and cancer of the ovary. It is also used in investigation of other types of cancer and as an antineoplastic in animals. Human exposure to melphalan occurs principally during its use in cancer treatment. Melphalan is administered orally or intravenously. Adult dosage is 6 mg/day, 5 days per month. Has been used as a military poison gas (a nitrogen mustard, alkaline, crystals).

• Erste Hilfe

  Skin Contact: Flood all areas of body that have contacted the substance with water. Speed in removing material from skin is of extreme importance. Do not wait to remove contaminated clothing; do it under the water stream. Use soap to help assure removal. Isolate contaminated clothing when removed to prevent contact by others. Eye Contact: Remove any contact lenses at once.Immediately flush eyes well with copious quantities ofwater or normal saline for at least 2030 min. Seek medicalattention.Inhalation: Leave contaminated area immediately; move tothe fresh air. Proper respiratory protection must be suppliedto any rescuers. If coughing, difficult breathing or any othersymptoms develop, seek medical attention at once, even ifsymptoms develop many hours after exposure.Ingestion: Contact a physician, hospital or poison center atonce. If the victim is unconscious or convulsing, do notinduce vomiting or give anything by mouth. Assure that hisairway is open and lay him on his side with his head lowerthan his body and transport immediately to a medical facility. If conscious and not convulsing, give a glass of water todilute the substance. Vomiting should not be induced without a physician’s advice.

• Carcinogenicity

  Melphalan is known to be a human carcinogen based on sufficient evidence of carcinogenicity from studies in humans.

• Environmental Fate

  The release to the environment of melphalan may result through various waste streams. It is practically insoluble in water, insoluble in chloroform and ether, slightly soluble in methanol, and soluble in ethanol, propylene glycol, 2% carboxymethyl cellulose, and alkaline and dilute acid solutions. It hydrolyzes in aqueous solution.
  If released into water, melphalan is expected to adsorb to suspended solids and sediment in the water based on the estimated Koc, using a structure estimation method based on molecular connectivity indices, of 355. Volatilization from water surfaces is not expected to be an important fate process based on this compound’s estimated Henry’s law constant, developed using a fragment constant estimation method, of 4.2×10^-13 atmm³ mol^-1 and its estimated vapor pressure, according to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere of 3×10^-10mmHg at 25 C. Hydrolysis in water and in moist soil will be an important fate process according to melphalan’s experimental neutral aqueous hydrolysis rate constant at 25℃ of 0.15 h^-1 which corresponds to a half-life of 4.6 h at pH 7. In line with soil compartment, insufficient data are available to determine the rate or importance of biodegradation of melphalan in water.
  If released to soil, it is expected to have moderate mobility based on its estimated Koc. Volatilization from moist soil surfaces is not expected to be an important fate process based on its estimated Henry’s law constant, or from dry soil surfaces, based on its estimated vapor pressure. Contrarily, hydrolysis in moist soil may be an important fate process according to its experimental neutral aqueous hydrolysis rate constant and its half-life. There are no available data to determine the rate or importance of biodegradation of melphalan in soil.
  If released to air, the value of its vapor pressure indicates that it will exist solely in the particulate phase in the atmosphere. Melphalan will be removed from the atmosphere by wet or dry deposition. On other hand, vapor-phase melphalan will be degraded in the atmosphere by reaction with photochemically produced hydroxyl radicals with an estimated halflife of about 1.7 h.
  An estimated bioconcentration factor value of 0.24, from an experimental log Kow of -0.52, suggests that the potential for bioconcentration in aquatic organisms is very low.

• Lager

  Store at RT

• Versand/Shipping

  UN2811 Toxic solids, organic, n.o.s., Hazard Class: 6.1; Labels: 6.1-Poisonous materials, Technical Name Required. UN3249 Medicine, solid, toxic, n.o.s., Hazard Class: 6.1; Labels: 6.1-Poisonous materials

• läuterung methode

  Purify melphalan by recrystallisation from MeOH, and its solubility is 5% in 95% EtOH containing one drop of 6N HCl. It is soluble in EtOH and propylene glycol but is almost insoluble in H2O. The RS-form has m 180-181o, and the R-form crystallises from MeOH with m 181.5-182o and [] D21 -7.5o (c 1.26, 1.0 N HCl). [Bergel & Stock J Chem Soc 2409 1954, Beilstein 14 IV 1689.]

• Toxicity evaluation

  Melphalan is a bifunctional alkylating agent of the nitrogen mustard type that binds to cellular macromolecules and it is cell cycle phase-nonspecific. This drug has the capacity to interfere with normal mitosis and cell division in rapidly proliferating tissues. Activity occurs as a result of formation of an unstable ethylenimmonium ion, which alkylates or binds with many intracellular molecular structures including nucleic acids. Its cytotoxic action is primarily due to cross-linking of strands of DNA and RNA, as well as inhibition of protein synthesis.

• Waste disposal

  Consult with environmental regulatory agencies for guidance on acceptable disposal practices. Generators of waste containing this contaminant (≥100 kg/mo) must conform to EPA regulations governing storage, transportation, treatment, and waste disposal. It is inappropriate and possibly dangerous to the environment to dispose of expired or waste drugs and pharmaceuticals by flushing them down the toilet or discarding them to the trash. Household quantities of expired or waste pharmaceuticals may be mixed with wet cat litter or coffee grounds, double-bagged in plastic, discard in trash. Larger quantities shall carefully take into consideration applicable DEA, EPA, and FDA regulations. If possible return the pharmaceutical to the manufacturer for proper disposal being careful to properly label and securely package the material. Alternatively, the waste pharmaceutical shall be labeled, securely packaged, and transported by a state licensed medical waste contractor to dispose by burial in a licensed hazardous or toxic waste landfill or incinerat

Melphalan Upstream-Materialien And Downstream Produkte

148-82-3, Melphalan Verwandte Suche: