Основные атрибуты  химическое свойство Информация о безопасности химические свойства, назначение, производство запасные части и сырье поставщик Обзор
Этантиол структурированное изображение

Этантиол

  • английское имяEthanethiol
  • CAS №75-08-1
  • CBNumberCB7854211
  • ФормулаC2H6S
  • мольный вес62.13
  • EINECS200-837-3
  • номер MDLMFCD00004887
  • файл Mol75-08-1.mol
химическое свойство
Температура плавления -148 °C
Температура кипения 35 °C(lit.)
плотность 0.839 g/mL at 25 °C(lit.)
плотность пара 2.1 (vs air)
давление пара 8.51 psi ( 20 °C)
показатель преломления n20/D 1.4306(lit.)
FEMA 4258 | ETHANETHIOL
Fp 1 °F
температура хранения Store below +30°C.
растворимость Soluble in Ether, Alcohol, Acetone
пка 10.6(at 25℃)
форма Liquid
цвет Colorless
Запах Strong chunk; offensive garlic.
Порог?обнаружения?запаха? 0.0000087ppm
Пределы взрываемости 2.8-18%(V)
Растворимость в воде Slightly miscible with water.
Мерк 14,3726
Номер JECFA 1659
БРН 773638
констант закона Генри 3.57(x 10-3 atm?m3/mol) at 25 °C (Przyjazny et al., 1983)
Пределы воздействия TLV-TWA 0.5 ppm (~1.3 mg/m3 ) (ACGIH and MSHA); ceiling 10 ppm (OSHA); IDLH 2500 ppm (NIOSH).
Диэлектрическая постоянная 6.9(14℃)
Стабильность Stable. Extremely flammable - note low flash point. Incompatible with oxidizing agents, strong acids. May form explosive mixtures with air.
LogP 1.44
Вещества, добавляемые в пищу (ранее EAFUS) ETHANETHIOL
Справочник по базе данных CAS 75-08-1(CAS DataBase Reference)
Рейтинг продуктов питания EWG 1
FDA UNII M439R54A1D
Справочник по химии NIST Ethanethiol(75-08-1)
Система регистрации веществ EPA Ethyl mercaptan (75-08-1)
больше
Заявления об опасности и безопасности
Коды опасности F,Xn,N,F+
Заявления о рисках 11-20-50/53-51/53-12-20/22
Заявления о безопасности 16-25-60-61
РИДАДР UN 2363 3/PG 1
OEL Ceiling: 0.5 ppm (1.3 mg/m3) [15-minute]
WGK Германия 3
RTECS KI9625000
F 13
Температура самовоспламенения 570 °F
TSCA Yes
кода HS 2930 90 98
Класс опасности 3
Группа упаковки I
Банк данных об опасных веществах 75-08-1(Hazardous Substances Data)
Токсичность LD50 orally in Rabbit: 682 mg/kg
ИДЛА 500 ppm
NFPA 704:
4
2 1

рисовальное письмо(GHS)

  • рисовальное письмо(GHS)

    GHS hazard pictogramsGHS hazard pictogramsGHS hazard pictograms

  • сигнальный язык

    опасность

  • вредная бумага

    H302+H332:Вредно при проглатывании или при вдыхании.

    H410:Чрезвычайно токсично для водных организмов с долгосрочными последствиями.

    H224:Чрезвычайно легко воспламеняющаяся жидкость. Пары образуют с воздухом взрывоопасные смеси.

  • оператор предупредительных мер

    P210:Беречь от тепла, горячих поверхностей, искр, открытого огня и других источников воспламенения. Не курить.

    P233:Держать в плотно закрытой/герметичной таре.

    P273:Избегать попадания в окружающую среду.

    P301+P312:ПРИ ПРОГЛАТЫВАНИИ: Обратиться за медицинской помощью при плохом самочувствии.

    P304+P340+P312:ПРИ ВДЫХАНИИ: Свежий воздух, покой. Обратиться за медицинской помощью при плохом самочувствии.

    P403+P233:Хранить в хорошо вентилируемом месте в плотно закрытой/герметичной таре.

Этантиол химические свойства, назначение, производство

Описание

Ethane thiol, commonly known as ethyl mercaptan, is a colorless gas or clear liquid with a distinct odor. It is an organosulfur compound with the formula CH3CH2SH. Abbreviated EtSH, it consists of an ethyl group (Et), CH3CH2, attached to a thiol group, SH. Its structure parallels that of ethanol, but with S instead of O. The odor of EtSH is infamous. Ethanethiol is more volatile than ethanol due to a diminished ability to engage in hydrogen bonding. Ethanethiol is toxic. It occurs naturally as a minor component of petroleum, and may be added to other wise odorless gaseous products such as liquefied petroleum gas (LPG) to help warn of gas leaks. At these concentrations, ethanethiol is not harmful.

Физические свойства

Colorless liquid with a strong, disagreeable, skunk-like or rotten egg odor. Extremely flammable liquid or gas. An experimentally determined odor threshold concentration of 1 ppbv was reported by Leonardos et al. (1969). Katz and Talbert (1930) reported experimental detection odor threshold concentrations in the range 0.66–7.6 μg/m3 (0.26 to 3.0 ppbv).

Использование

Ethanethiol is used as an intermediate inthe manufacture of insecticides, plastics, andantioxidants; and as an additive to natural gasto give odor. It occurs in illuminating gas andin petroleum distillates.

Методы производства

Ethyl mercaptan is prepared by distilling ethyl potassium sulfate with potassium hydrogen sulfide. Additional mercaptans can be prepared in a similar manner with the corresponding proper ingredients.

Подготовка

Ethanethiol is prepared by the reaction of ethylene with hydrogen sulfide over a catalyst. The various producers utilize different catalysts in this process. It is also be prepared commercially by the reaction of ethanol with hydrogen sulfide gas over an acidic solid catalyst, such as alumina.
Ethanethiol was originally reported by Zeiss in 1834 . Zeise treated calcium ethyl sulfate with a suspension of barium sulfide saturated with hydrogen sulfide. He is credited with naming the C2H5S- group as mercaptum.
Ethanethiol can also be prepared by a halide displacement reaction, where ethyl halide is reacted with aqueous sodium bisulfide. This conversion was demonstrated as early as 1840 by Henri Victor Regnault.

Определение

ChEBI: Ethanethiol is an alkanethiol that is ethane substituted by a thiol group at position 1. It is added to odorless gaseous products such as liquefied petroleum gas (LPG) to provide a garlic scent which helps warn of gas leaks. It has a role as a rodenticide.

Реакции

Ethane thiol is a valued reagent in organic synthesis. In the presence of sodium hydroxide, it gives the powerful nucleophile SEt-. The salt can be generated quantitatively by reaction with sodium hydride.
Ethane thiol can be oxidized to ethyl sulfonic acid, using bleach and related strong aqueous oxidants. Weaker oxidants, such as ferric oxide give the disulfide, diethyl disulfide :
2 EtSH + H2O2 → EtS-SEt + 2 H2O
Like other thiols, it behaves comparably to hydrogen sulfide. For example, it binds, concomitant with deprotonation to "soft" transition metal cations, such as Hg2+, Cu+, and Ni2+ to give polymeric thiolato complexes, Hg(SEt)2, CuSEt, and Ni(SEt)2, respectively.

Общее описание

A clear colorless low-boiling liquid (boiling point 97°F) with an overpowering, garlic-like/skunk-like odor. Flash point -55°F. Less dense than water and very slightly soluble in water. Vapors are heavier than air. Vapors may irritate nose and throat. May be toxic if swallowed, by inhalation or by contact. Added to natural gas as an odorant. Used as a stabilizer for adhesives.

Реакции воздуха и воды

Highly flammable. A very dangerous fire hazard. Very slightly soluble in water.

Профиль реактивности

Ethanethiol reacts violently with calcium hypochlorite, May react vigorously with other oxidizing reagents. On contact with strong acids or when heated to decomposition Ethanethiol emits highly toxic fumes of sulfur oxides [Sax, 9th ed., 1996, p. 1575].

Опасность

Toxic by ingestion and inhalation. Flammable, dangerous fire risk.

Угроза здоровью

The inhalation toxicity of ethanethiol islower than that of methanethiol. Intraperitoneal administration in rats at sublethaldoses caused deep sedation, followed bylethargy, restlessness, lack of muscular coordination, and skeletal muscle paralysis.Higher doses produced cyanosis, kidney andliver damage, respiratory depression, coma,and death. The intraperitoneal LD50 value inrats was 450 mg/kg (ACGIH 1986).
Ethanethiol is metabolized to inorganicsulfate and ethyl methyl sulfone, and excreted. The oral LD50 value in rats is 680 mg/kg.
In humans, repeated exposures to itsvapors at about 5 ppm concentration canproduce irritation of the nose and throat,headache, fatigue, and nausea.

Химическая реактивность

Reactivity with Water No reaction; Reactivity with Common Materials: No reaction; Stability During Transport: Stable; Neutralizing Agents for Acids and Caustics: Not pertinent; Polymerization: Not pertinent; Inhibitor of Polymerization: Not pertinent.

Профиль безопасности

Moderately toxic by ingestion, inhalation, and intraperitoneal routes. A skin and eye irritant. Inhalation causes central nervous system effects in humans. A very dangerous fire hazard when exposed to heat or flame; can react vigorously with oxidizing materials. A moderate explosion hazard when exposed to spark or flame. Violent reaction with Ca(OCl)2. Will react with water or steam to produce toxic and flammable vapors. To fight fire, use CO2, dry chemical. When heated to decomposition or on contact with acid or acid fumes it emits hghly toxic fumes of SOx. See also MERCAPTANS.

Возможный контакт

This material is used as a warning odorant for liquefied petroleum gases. It is used as an intermediate in the manufacture of many pesticides and other organic chemicals

Экологическая судьба

Biological. Ethyl mercaptan did not degrade in anaerobic sediments and sludges nor in anaerobic freshwater conditions (van Leerdam et al., 2006).
Photolytic. A second-order rate constant of 1.21 x 10-12 cm3/molecule?sec was reported for the reaction of ethyl mercaptan and NO3 radicals in the atmosphere at 297 K (Atkinson, 1991).
Chemical/Physical. In the presence of nitric oxide, ethyl mercaptan reacted with OH radicals forming ethyl thionitrite. The rate constant for this reaction is 2.7 x 10-11 at 20 °C (MacLeod et al., 1984).

Перевозки

UN2363 Ethyl mercaptan, Hazard Class: 3; Labels: 3-Flammable liquid

Методы очистки

Dissolve the thiol in aqueous 20% NaOH, extract it with a small amount of *benzene and then steam distil until clear. After cooling, the alkaline solution is acidified slightly with 15% H2SO4 and the thiol is distilled off, dried with CaSO4, CaCl2 or 4A molecular sieves, and fractionally distilled under nitrogen [Ellis & Reid J Am Chem Soc 54 1674 1932]. It has a foul odour. [Beilstein 1 IV 1390.]

Несовместимости

May form explosive mixture with air. Slowly forms peroxides. This material is a weak acid. Reacts with oxidizers, causing fire and explosion hazard. Reacts with strong acids evolving toxic and flammable hydrogen sulfide. May accumulate static electrical charges, and may cause ignition of its vapors. Attacks some forms of plastics, coatings and rubber. Aldehydes are frequently involved in self-condensation or polymerization reactions. These reactions are exothermic; they are often catalyzed by acid. Aldehydes are readily oxidized to give carboxylic acids. Flammable and/or toxic gases are generated by the combination of aldehydes with azo, diazo compounds, dithiocarbamates, nitrides, and strong reducing agents. Aldehydes can react with air to give first peroxo acids, and ultimately carboxylic acids. These autoxidation reactions are activated by light, catalyzed by salts of transition metals, and are autocatalytic (catalyzed by the products of the reaction). The addition of stabilizers (antioxidants) to shipments of aldehydes retards autoxidation

Утилизация отходов

Incineration (1093℃) followed by scrubbing with a caustic solution

Этантиол поставщик

поставщик телефон страна номенклатура продукции благоприятные условия
+86 13288715578
+8613288715578
China 12449 58
+86-0371-55170693
+86-19937530512
China 21667 55
+86 18953170293 China 2931 58
18871490254 CHINA 28180 58
+86-19930503282 China 8821 58
86-13657291602 CHINA 22968 58
+8618523575427 China 49392 58
+86-0371-86658258
+8613203830695
China 29825 58
+86-029-81138252
+86-18789408387
China 3957 58
18503026267 CHINA 9641 58