플루오르화 베릴륨

그림문자(GHS)

• 그림문자(GHS)

  

• 신호 어

  Danger

• 유해·위험 문구

  H301：삼키면 유독함

  H311：피부와 접촉하면 유독함

  H314：피부에 심한 화상과 눈에 손상을 일으킴

  H330：흡입하면 치명적임

  H350：암을 일으킬 수 있음 (노출되어도 암을 일으키지 않는다는 결정적인 증거가 있는 노출경로가 있다면 노출경로 기재)

  H372：장기간 또는 반복 노출되면 장기(또는, 영향을 받은 알려진 모든 장기를 명시)에 손상을 일으킴

  H411：장기적 영향에 의해 수생생물에 유독함

• 예방조치문구

  P260：분진·흄·가스·미스트·증기·...·스프레이를 흡입하지 마시오.

  P264：취급 후에는 손을 철저히 씻으시오.

  P264：취급 후에는 손을 철저히 씻으시오.

  P270：이 제품을 사용할 때에는 먹거나, 마시거나 흡연하지 마시오.

  P271：옥외 또는 환기가 잘 되는 곳에서만 취급하시오.

  P280：보호장갑/보호의/보안경/안면보호구를 착용하시오.

  P284：호흡 보호구를 착용하시오.

  P301+P310：삼켰다면 즉시 의료기관(의사)의 진찰을 받으시오.

  P301+P330+P331：삼켰다면 입을 씻어내시오. 토하게 하려 하지 마시오.

  P302+P352：피부에 묻으면 다량의 물로 씻으시오.

  P303+P361+P353：피부(또는 머리카락)에 묻으면 오염된 모든 의복은 벗거나 제거하시오 피부를 물로 씻으시오/샤워하시오.

  P304+P340：흡입하면 신선한 공기가 있는 곳으로 옮기고 호흡하기 쉬운 자세로 안정을 취하시오.

  P305+P351+P338：눈에 묻으면 몇 분간 물로 조심해서 씻으시오. 가능하면 콘택트렌즈를 제거하시오. 계속 씻으시오.

  P310：즉시 의료기관(의사)의 진찰을 받으시오. 삼켰다면 즉시 의료기관(의사)의 도움을 받으시오.

  P312：불편함을 느끼면 의료기관(의사)의 진찰을 받으시오.

  P314：불편함을 느끼면 의학적인 조치·조언을 구하시오.

  P320：긴급히 (…) 처치를 하시오.

  P321：(…) 처치를 하시오.

  P322：특정 조치(라벨의 … 참조)

  P330：입을 씻어내시오.

  P361：즉시 오염된 의복을 모두 벗을 것

  P363：다시 사용전 오염된 의류는 세척하시오.

  P403+P233：용기는 환기가 잘 되는 곳에 단단히 밀폐하여 저장하시오.

  P405：밀봉하여 저장하시오.

  P501：...에 내용물 / 용기를 폐기 하시오.

플루오르화 베릴륨 화학적 특성, 용도, 생산

• 개요

  Beryllium fluoride has the formula, BeF2, and is a hygroscopic, amorphous solid with a melting point of 800°C. It is soluble in water and is used in beryllium metallurgy in which the metal, Be, is employed as an alloy. Solid crystalline BeF2 has a silica-like structure with beryllium in a four-coordinate position.

• 화학적 성질

  Beryllium fluoride is readily soluble in water, dissolving in its own water of hydration as BeF2·2H2O. The compound cannot be crystallized from solution and is prepared by thermal decomposition of ammonium fluoberyllate, (NH4)2BeF4.

• 물리적 성질

  Glassy solid; tetragonal crystal system; hygroscopic; density 2.1 g/cm³; melts BERYLLIUM FLUORIDE 101 at 552°C; vaporizes at 1,169°C; very soluble in water; sparingly soluble in alcohol.

• 용도

  Beryllium fluoride is used in biochemistry, particularly protein crystallography, since it binds in some of the same ways as phosphate does in human tissues. ADP and beryllium fluoride together tend to bind to ATP sites and inhibit protein action, making it possible to crystallize proteins in the bound state. Beryllium fluoride forms a basic constituent of the preferred fluoride salt mixture used in liquid-fluoride nuclear reactors. Typically, beryllium fluoride is mixed with LiF to form a base solvent, into which fluorides of uranium and thorium are introduced. Beryllium fluoride is exceptionally chemically stable and LiF/BeF2 mixtures have low melting points and the best neutronic properties of any of the fluoride salt combinations appropriate for reactor use.

• 정의

  ChEBI: The fluoride salt of beryllium (+2 oxidation state). In the solid state it exists as a glass, with four-coordinate Be2+ tetrahedral centres and two-coordinate fluoride centres. As a gas it adopts a linear triatomic structure and in the liquid state a fluctuating tetrahedral structure. In protein crystallography it is used as a mimic of phosphate.

• 제조 방법

  Beryllium fluoride is made by thermal decomposition of ammonium beryllium fluoride at 900 to 950°C.

• Manufacturing Process

  First, beryllium hydroxide is dissolved in an ammonium hydrogen fluoride solution. The resulting ammonium tetrafluoroberyllate is dissociated to a small extent in the solution that the pH can be varied over a wide range without precipitating beryllium hydroxide. Impurities can thus be precipitated relatively easily as hydroxides. Aluminum is precipitated as hydroxide by increasing the pH to 8.3. Chromium and manganese are precipitated by oxidation with lead dioxide, and manganese is precipitated by oxidation with lead dioxide and manganese dioxide. Copper, nickel, and lead are precipitated as sulfides. Ammonium tetrafluoroberyllate is freely soluble in water. When concentrated by evaporation, it crystallizes without water or hydration. Above 130 ?C, it dissociates into ammonium fluoride and beryllium fluoride. Between 900 and 1100 ?C, ammonium tetrafluoroberyllate dissociates into gaseous beryllium fluoride and gaseous ammonium fluoride. The latter can be recycled into the process as ammonium hydrogen fluoride by dissolving it in aqueous hydrogen fluoride. Cooling produces beryllium fluoride as vitreous grains.

• 일반 설명

  Odorless white solid. Denser than water.

• 공기와 물의 반응

  Water soluble.

• 반응 프로필

  Beryllium fluoride is incompatible with the following: Acids, caustics, chlorinated hydrocarbons, oxidizers, magnesium, molten lithium .

• 위험도

  A known carcinogen. Toxic by inhalation and ingestion.

• 건강위험

  Any dramatic weight loss should be considered as possible first indication of beryllium disease. Inhalation causes irritation of nose, throat, and lungs, severe pneumonitis, and/or pulmonary edema. Ingestion causes fatigue, weakness, loss of appetite. Contact with eyes causes severe irritation and burns. Contact with skin causes dermatitis and non-healing ulcers.

• 화재위험

  Special Hazards of Combustion Products: Toxic and irritating vapor of unburned material may form in fire.

• Safety Profile

  Confirmed carcinogen withexperimental carcinogenic and tumorigenic data byinhalation. Poison by ingestion, subcutaneous,intravenous, and intraperitoneal routes. Incompatible with Mg. When heated to decomposition, itemits very toxic fumes of BeO and F

플루오르화 베릴륨 공급 업체

Global(62)Suppliers

플루오르화 베릴륨 관련 검색