Preparation
The synthesis of 9,9-Bis(4-aminophenyl)fluorene can be carried out through the following stepwise procedure:
Prepare the reaction mixture:
Place 3.6 g of fluorenone (20 mmol), 7.2 g of aniline hydrochloride (55.6 mmol), 0.5 g of sodium bisulfite (4.8 mmol), 8.8 mL of aniline (96.4 mmol), and 6 mL of toluene in a 100 mL two-necked flask.
Ensure the reaction is conducted under nitrogen protection.
Add a water separator to the two-necked flask.
Begin the reaction:
Stir the reaction mixture and slowly increase the temperature to 120 °C.
Allow the reaction to continue for 30 minutes.
Separate the green liquid produced in the water separator.
Further reaction at elevated temperature:
Continue the reaction at 120 °C for an additional 3 hours.
Separate the water produced in the water separator.
Increase temperature and maintain reaction:
Slowly raise the temperature to 135 °C.
Keep the reaction at this temperature for 1.5 hours.
Monitor for completion:
Check the water separator for any further production of water.
Cease the reaction when no more water is produced in the water separator.
Cool down and adjust pH:
Allow the reacted material to cool to around 60 ℃.
Add 10 wt% potassium hydroxide solution to the reaction mixture.
Adjust the pH of the mixture to 9.
Stir the solution for 15 minutes while it is still hot.
Filtration and purification:
Filter the solution to remove any solid impurities.
Wash the filter cake with water.
Recrystallize the washed filter cake using 30 mL of toluene.
Filter the recrystallized product to obtain pure rice-white product.
Yield determination:
Weigh the obtained pure product, which should amount to 6.55 g.
Calculate the yield by dividing the obtained mass by the theoretical maximum mass and multiplying by 100%.
The yield of the pure rice-white product should be 94%.
References
[1] PHAM H D, GIL-ESCRIG L, FERON K, et al. Boosting inverted perovskite solar cell performance by using 9,9-bis(4-diphenylaminophenyl)fluorene functionalized with triphenylamine as a dopant-free hole transporting material?[J]. Journal of Materials Chemistry A, 2019, 20: 12507-12517. DOI:
10.1039/C9TA01681C.
[2] G. SONG C. C. Colorless, heat resistant polyimide films derived from 2,3,3′,4′-biphenyltetracarboxylic dianhydride[J]. IOP Conference Series: Materials Science and Engineering, 2020, 73 1. DOI:
10.1088/1757-899X/733/1/012035.
[3] WEI J, YU L, YAN L, et al. Synthesis of 9,9-bis(4-hydroxyphenyl) fluorene catalyzed by bifunctional ionic liquids?[J]. RSC Advances, 2021, 52: 32559-32564. DOI:
10.1039/D1RA05967J.
[4] SURASAK SEESUKPHRONRARAK. Synthesis and characterization of 9,9-bis(4-hydroxyphenyl and 4-aminophenyl)dibenzofluorenes: Novel fluorene-based monomers[J]. Journal of Polymer Science Part A: Polymer Chemistry, 2019, 57 24: 2602-2605. DOI:
10.1002/pola.29540.
[5] HOU CHIEN CHANG. Synthesis of 9,9-bis(4-aminophenyl)fluorene-based benzoxazine and properties of its high-performance thermoset[J]. Journal of Polymer Science Part A: Polymer Chemistry, 2012, 50 11: 2201-2210. DOI:
10.1002/pola.25993.
[6] Patent: CN107892649, 2018, A, . Location in patent: Paragraph 0023-0042
[7] Fortschr. Teerfarbenfabr. Verw. Industriezweige, vol. 23, p. 240
[8] DONGHUI YU. Fluorene-Based Phosphine Oxide Host Materials for Blue Electrophosphorescence: An Effective Strategy for a High Triplet Energy Level[J]. Chemistry - A European Journal, 2011, 17 9: 2592-2596. DOI:
10.1002/chem.201003434.
