Description
Nickel (II) nitrate hexahydrate is the hexahydrate form of the nickel (II) nitrate. Nickel nitrate (chemical formula: Ni(NO3)2) is manufactured by the reaction of nickel oxide with nitric acid. The nickel (II) nitrate hexahydrate can be used as a precursor during the manufacturing of other nickel salts and supported nickel catalysts. For example, it is the precursor for the manufacturing of nickel sulfide-reduced graphene oxide (RGO) composite powders. It can also be used for the manufacturing of nickel and nickel oxide nanocrystals impregnated O-MWCNTs which is useful in semiconductor industries. Moreover, it can also be used in electroplating and as a mordent in textile dyeing. Finally, it can be used to improve the cycling stability and rate capability o Li2MnO2.
Preparation
Nickel nitrate hexahydrate may be prepared by several methods based on the reaction of dilute nitric acid on nickel powder, nickel oxide or nickel carbonate. The reaction is exothermic and requires controlled cooling during production. The hexahydrate can be dehydrated to anhydrous salt by treatment with fuming nitric acid.
References
https://www.alfa.com/en/catalog/A15540/
https://en.wikipedia.org/wiki/Nickel(II)_nitrate
Description
Nickel (II) nitrate hexahydrate appears as green crystals and substantially soluble in water.
It is stable, a strong oxidiser, and incompatible with reducing agents. It has wide industrial
applications in nickel plating as catalysts and is indirectly associated with other industries
of nickel alloy manufacturers, nickel miners, smelters and refiners, nickel platers, and
exposure to alloys, for example, in coinage.
Chemical Properties
Green crystal
Uses
Nickel(II) nitrate hexahydrate may be used as a precursor for the synthesis of [Ni
1/3Co
1/3Mn
1/3]O
2 powders, Ni(II) oxide aerogels and crystalline nickel complexes, [Ni(C
6H
7N
3O)
2(NO
3)
2] and [Ni(C
6H
7N
3O)
3](NO
3)
2·H
2O.
Uses
Nickel plating, manufacturing of ceramic colorsNickel(II) nitrate hexahydrate is used as a precursor in the manufacturing of other nickel salts and supported nickel catalysts. It finds use as a catalyst in organic synthesis. Further it is used in electroplating and as a mordent in textile dyeing. It is a precursor for preparing nickel sulfide-reduced graphene oxide (RGO) composite powders with high initial capacities and good cycling performance. It can be employed in the preparation of nickel and nickel oxide nanocrystals impregnated O-MWCNTs (oxygen-functionalized multi-walled carbon nanotubes) with potential applications in semiconductor industries. It finds use in improving cycling stability ad rate capability of Li2MnO3.
Preparation
Emerald green crystals of the hexahydrate Ni(N03)2?6H20 crystallize
from aqueous solutions at room temperature. These are isomorphous with the corresponding
cobalt(II) salt containing the regular octahedral [Ni(H20)6]2+ ions with Ni-O distances = 2.03 A. The tetrahydrate crystallize above 54° and the dihydrate above 85.4°.
The pale green anhydrous nitrate can be obtained by dehydration of the hydrate with
dinitrogen pentoxide in fuming nitric acid or by the liquid phase reaction of dinitrogen
tetroxide with nickel carbonyl [the gas phase reaction gives the nitrite Ni(N02)2]
Ni(CO)4+2N2O4 -* Ni(N03)2+2NO+4CO
The first product of this latter rather violent reaction is the adduct Ni(NO3)2N2O4 from
which the nitrogen tetroxide is removed by heating in vacuo. It can also be prepared by the
reaction of dinitrogen tetroxide-ethyl acetate mixtures with nickel(II) chloride. The infrared
spectrum shows it to be a typical covalent nitrate. It is involatile and decomposes upon
heating in nitrogen to give the nitrite Ni(NO2)2 above 260°.
General Description
Nickel(II) nitrate hexahydrate (Ni(NO
3)
2.6H
2O) is a hydrated nickel(II) salt. Its thermal degradation has been investigated by thermogravimetric methods under quasi-isothermal conditions.
Safety Profile
Confirmed carcinogen.
Moderately toxic by ingestion. When heated
to decomposition it emits toxic fumes of
NOx. See also NICKEL(II) NITRATE.
Purification Methods
Crystallise it from water (3.3g/mL) by partial evaporation in a desiccator. Store it in a desiccator as it is deliquescent.