Levobupivacaine

Gefahreninformationscode (GHS)

• Bildanzeige (GHS)

  

• Alarmwort

  Achtung

• Gefahrenhinweise

  H301：Giftig bei Verschlucken.

  H311：Giftig bei Hautkontakt.

  H330：Lebensgefahr bei Einatmen.

• Sicherheit

  P260：Dampf/Aerosol/Nebel nicht einatmen.

  P264：Nach Gebrauch gründlich waschen.

  P264：Nach Gebrauch gründlich waschen.

  P270：Bei Gebrauch nicht essen, trinken oder rauchen.

  P271：Nur im Freien oder in gut belüfteten Räumen verwenden.

  P280：Schutzhandschuhe/Schutzkleidung/Augenschutz tragen.

  P284：Atemschutz tragen.

  P301+P310：BEI VERSCHLUCKEN: Sofort GIFTINFORMATIONSZENTRUM/Arzt/... (geeignete Stelle für medizinische Notfallversorgung vom Hersteller/Lieferanten anzugeben) anrufen.

  P302+P352：BEI BERÜHRUNG MIT DER HAUT: Mit viel Wasser/... (Hersteller kann, falls zweckmäßig, ein Reinigungsmittel angeben oder, wenn Wasser eindeutig ungeeignet ist, ein alternatives Mittel empfehlen) waschen.

  P304+P340：BEI EINATMEN: Die Person an die frische Luft bringen und für ungehinderte Atmung sorgen.

  P310：Sofort GIFTINFORMATIONSZENTRUM/Arzt/ anrufen.

  P312：Bei Unwohlsein GIFTINFORMATIONSZENTRUM/Arzt/... (geeignete Stelle für medizinische Notfallversorgung vom Hersteller/Lieferanten anzugeben) anrufen.

  P320：Besondere Behandlung dringend erforderlich

  P321：Besondere Behandlung

  P322：Gezielte Maßnahmen

  P330：Mund ausspülen.

  P361：Alle kontaminierten Kleidungsstücke sofort ausziehen.

  P363：Kontaminierte Kleidung vor erneutem Tragen waschen.

  P403+P233：An einem gut belüfteten Ort aufbewahren. Behälter dicht verschlossen halten.

  P405：Unter Verschluss aufbewahren.

  P501：Inhalt/Behälter ... (Entsorgungsvorschriften vom Hersteller anzugeben) zuführen.

Levobupivacaine Chemische Eigenschaften,Einsatz,Produktion Methoden

• Chemische Eigenschaften

  White Solid

• Originator

  Chirocaine,Abbott Laboratories

• Verwenden

  Local anaesthetic used for epidural and intrathecal anaesthesia.

• Definition

  ChEBI: Levobupivacaine is the (S)-(-)-enantiomer of bupivacaine. It has a role as a local anaesthetic, an adrenergic antagonist, an amphiphile, an EC 3.1.1.8 (cholinesterase) inhibitor and an EC 3.6.3.8 (Ca(2+)-transporting ATPase) inhibitor. It is a conjugate base of a levobupivacaine(1+). It is an enantiomer of a dextrobupivacaine.

• Manufacturing Process

  Synthesis of L-pipecolic acid 2,6-xylidide (Patent US 4,695,576)
  130 g of pipecolic acid and 158.6 g of Laevo (+)-tartaric acid are dissolved under stirring in 2 L 95% ethyl alcohol and 125 ml water at 80°C. The solution is allowed to cool to room temperature and after two days the crystallized D-pipecolic-tartrate is separated. The L-pipecolic-tartrate remains in solution. The filtrate is evaporated and dissolved in 5% acetic acid. Finally the solution is treated with Amberlite IR 45* in an ion exchanger. The eluate thus obtained is evaporated and the resulting crystalline residue is dried with potassium hydroxide in vacuo. The product obtained consists of L-pipecolic acid [α]D24 = -26.2°(C = 5, H2O).
  4 g of phosphorus pentachloride was added to a suspension of 4 g of Lpipecolic acid hydrochloride in 40 ml acetylchloride. The initial reaction is effected at a temperature of about 35°C under stirring for 2 hours. The chlorination is completed by adding during a time period of about 10 minutes an additional two grams of phosphorus pentachloride and stirring over a further period of 4 hours while maintaining the suspension at a temperature of about 35°C. The resulting L-pipecolic acid chloride hydrochloride is filtered and washed with toluene and acetone. The crystalline residue is then dried in vacuo, m.p. 155°C.
  A mixture of 2.7 ml 2,6-dimethylaniline, 4 ml acetone, and 4 ml Nmethylpyrrolidone is gradually added under stirring for 2 hours at 70°C to a suspension of 4 g of L-pipecolic acid chloride hydrochloride. This yields a crystalline product, which is filtered, washed with acetone and dried. This crystalline product is then dissolved in water and the base is precipitated by the addition of ammonia. The base is then extracted by the use of toluene and is recovered by evaporation. The base is recrystallized from a mixture of hexane and ethanol to yield L-pipecolic acid 2,6-xylidide. The melting point of this compound is 129-130°C.
  Preparation of L-N-n-butylpipecilic acid 2,6-xylidide may de carried out by analogy with the preparation of L-N-n-propylpipecolic acid 2,6-xylidide (Patent US 5,777,124).
  n-Butylbromide and potassium carbonate are added to a solution of L-pipecolic acid 2,6-xylidide dissolved in isopropyl alcohol. Thereafter, 5 ml of water is added to the mixture and the reaction is carried out for 4 hours at 72°C.
  To complete the reaction, a further 0.8 ml n-butylbromide are added under continuous stirring and heating for 4 hours. The residue is treated with a mixture of 250 ml toluene and an equal amount of water at 50°C. The toluene layer is separated and washed three times with 100 ml warm water (40°C). A 175 ml portion of the toluene is removed by evaporation and the remainder is stored at +5°C for 6 hours to achieve crude crystalline L-N-n-butylpipecilic acid 2,6-xylidide. The crystalline product is separated by filtration, washed with some cooled toluene and dried at 70°C. Recrystallization may be carried from toluene. This product is dissolved in 100 ml ethanol and neutralized with concentrated hydrochloric acid. Ethanol is removed by evaporation and the hydrochloride product obtained is vacuum dried. Finally the latter is recrystallized from isopropyl alcohol.

• Therapeutic Function

  Local anesthetic

• Allgemeine Beschreibung

  Levobupivacaine is the pure “S” enantiomer of bupivacaineand in vivo and in vitro studies confirm that it does notundergo metabolic inversion to R(+) bupivacaine. The pKaof the tertiary nitrogen is 8.09, the same as bupivacaine’s pKa. Levobupivacaine is available in solution for epiduraladministration, peripheral nerve block administration, andinfiltration anesthesia. Clinical trials have shown thatlevobupivacaine and bupivacaine have similar anestheticeffects. Levobupivacaine has lower CNS and cardiotoxicitythan bupivacaine although unintended intravenousinjection when performing nerve blocks may result intoxicity. Racemic bupivacaine is metabolized extensivelywith no unchanged drug found in the urine or feces. Liverenzymes including the CYP3A4 and CYP1A2 isoforms areresponsible for N-dealkylation and 3-hydroxylation oflevobupivacaine followed by glucuronidation or sulfation.

• Pharmakologie

  This is the laevo (S–) enantiomer of bupivacaine, with similar properties to the racemic mixture, though it has slightly higher protein binding and clearance and hence a lower potential for cardiac and CNS toxicity. In practice, several other factors contribute to local anaesthetic toxicity, and the recommended maximum doses remain the same. Its formulation is expressed as percentage weight per unit volume of free base; racemic bupivacaine is expressed as percentage weight per unit volume of hydrochloride salt. Levobupivacaine therefore contains 13% more active molecules for a given dose.

Levobupivacaine Upstream-Materialien And Downstream Produkte

Levobupivacaine Anbieter Lieferant Produzent Hersteller Vertrieb Händler.

Global(144)Suppliers

27262-47-1, Levobupivacaine Verwandte Suche: