636-93-1

Hazard Information

Material Safety Data Sheet(MSDS)

Questions And Answer

• Synthesis

  Phenol (0.10 mol) was dissolved in water containing 40% sodium hydroxide (10 mL, 0.1 mol) and heated to allow it to dissolve slowly. The water was then concentrated by evaporation under reduced pressure. PEG 400 (1.6 g, approximately 0.04 mol) and the alkylating agent dimethyl sulfate (0.11 mol) were slowly added to the reaction system with vigorous stirring. The reaction was accelerated by heating and monitored by HPLC and TLC until the phenol was completely converted. The mixture was then poured into a hot aqueous solution of sodium hydroxide (5%) or water (80-90°C, 100 mL) and stirred to allow the product to precipitate or separate into layers. The precipitate or organic layer was washed with water (three times, 50 mL each time). HPLC showed that the purity of the product obtained via this route was above 96%. For higher purity, recrystallization with a suitable solvent or distillation under vacuum can be performed. Caution: Dimethyl sulfate is a highly toxic compound; extreme caution must be exercised during handling. It must never come into contact with skin or gloves.

  

  ;

Spectrum Detail

Well-known Reagent Company Product Information

Supplier

Related Products