Основные атрибуты  химическое свойство Информация о безопасности химические свойства, назначение, производство запасные части и сырье Обзор
ТЕТРАЭТИЛОВЫЙ СВИНЕЦ структурированное изображение

ТЕТРАЭТИЛОВЫЙ СВИНЕЦ

  • английское имяTETRAETHYLLEAD
  • CAS №78-00-2
  • CBNumberCB0784388
  • ФормулаC8H20Pb
  • мольный вес323.44
  • EINECS201-075-4
  • номер MDLMFCD00072541
  • файл Mol78-00-2.mol
химическое свойство
Температура плавления −136 °C(lit.)
Температура кипения 84-85 °C15 mm Hg(lit.)
плотность 1.653 g/mL at 25 °C(lit.)
показатель преломления n20/D 1.519(lit.)
Fp 84 °F
форма liquid
Удельный вес 1.653
Растворимость в воде insoluble H2O; soluble benzene, petroleum ether, gasoline [MER06]
Гидролитическая чувствительность 4: no reaction with water under neutral conditions
Мерк 13,9277
Пределы воздействия TLV-TWA 0.1 mg (Pb)/m3 (skin) (ACGIH)
PEL-TWA 0.075 mg (Pb)/m3 (skin) (OSHA).
Стабильность Stable. Highly flammable. Incompatible with strong oxidizing agents, concentrated acids. May dissolve some types of rubber. May be light sensitive. May detonate if confined at temperatures above 110 C.
Справочник по базе данных CAS 78-00-2(CAS DataBase Reference)
Рейтинг продуктов питания EWG 2
FDA UNII 13426ZWT6A
Система регистрации веществ EPA Tetraethyllead (78-00-2)
Заявления об опасности и безопасности
Коды опасности T+,N
Заявления о рисках 61-26/27/28-33-50/53-62-38-10
Заявления о безопасности 53-45-60-61-36/37-26-28
РИДАДР UN 1649 6.1/PG 1
OEB D
OEL TWA: 0.075 mg/m3 [skin]
WGK Германия 3
RTECS TP4550000
TSCA Yes
Класс опасности 6.1(a)
Группа упаковки I
Банк данных об опасных веществах 78-00-2(Hazardous Substances Data)
Токсичность LD50 orally in rats: 12.3 mg/kg (Schroeder)
ИДЛА 40 mg Pb/m3
NFPA 704:
2
3 2

рисовальное письмо(GHS)

  • рисовальное письмо(GHS)

    GHS hazard pictogramsGHS hazard pictogramsGHS hazard pictograms

  • сигнальный язык

    опасность

  • вредная бумага

    H300+H310+H330:Смертельно при проглатывании, при контакте с кожей или при вдыхании.

    H410:Чрезвычайно токсично для водных организмов с долгосрочными последствиями.

    H373:Может поражать органы (Нервная система) в результате многократного или продолжительного воздействия при вдыхании.

    H360Df:Может отрицательно повлиять на неродившегося ребенка. Предполагается, что данное вещество может отрицательно повлиять на способность к деторождению.

  • оператор предупредительных мер

    P201:Беречь от тепла, горячих поверхностей, искр, открытого огня и других источников воспламенения. Не курить.

    P260:Не вдыхать газ/ пары/ пыль/ аэрозоли/ дым/ туман.

    P280:Использовать перчатки/ средства защиты глаз/ лица.

    P301+P310+P330:ПРИ ПРОГЛАТЫВАНИИ: Немедленно обратиться за медицинской помощью. Прополоскать рот.

    P302+P352+P310:ПРИ ПОПАДАНИИ НА КОЖУ: Промыть большим количеством воды. Немедленно обратиться за медицинской помощью.

    P304+P340+P310:ПРИ ВДЫХАНИИ: Свежий воздух, покой. Немедленно обратиться за медицинской помощью.

    P308+P313:ПРИ подозрении на возможность воздействия обратиться за медицинской помощью.

    P403+P233:Хранить в хорошо вентилируемом месте в плотно закрытой/герметичной таре.

ТЕТРАЭТИЛОВЫЙ СВИНЕЦ химические свойства, назначение, производство

Химические свойства

colourless to yellow liquid

Физические свойства

Colorless liquid; burns with orange flame with green margin; refractive index 1.5198; density 1.653 g/mL at 20°C; insoluble in water; slightly soluble in ethanol; soluble in benzene, toluene, gasoline, and petroleum ether.

Использование

Tetraethyllead is used as an additive to gasolineto prevent knocking in motors. However,because of its high toxicity and the pollutionproblem, its use in gasoline has been drasticallycurtailed.

Методы производства

These compounds were, at one time, the major industrial use of lead and source of environmental pollution of inorganic lead combustion products. However, the addition of these compounds to gasoline in the major industrialized countries of the world has been discontinued because of the use of catalysts for the control of the amount of nitrogen oxides in automobile exhaust. Organolead additives are still being phased out in many underdeveloped countries, although the United Nations has called for a global phaseout of lead in gasoline.

Определение

ChEBI: An organolead compound consisting of four ethyl groups joined to a central lead atom.

Подготовка

Lead tetraethyl is prepared by heating ethyl chloride in the presence of a catalyst in an autoclave at 40 to 60°C with an alloy of lead and sodium:
Pb + 4Na + 4C2H5Cl → Pb(C2H5)4 + 4NaCl
Also, it can be prepared by the reaction of lead with ethylene and hydrogen in the presence of Ziegler catalyst, triethylaluminum:
Pb + 4C2H4 + 2H2 → Pb(C2H5)4

Общее описание

A colorless liquid with a characteristic odor. Flash point 200°F. Density 14 lb / gal. Insoluble in water. Toxic by inhalation and by skin absorption.

Реакции воздуха и воды

Insoluble in water.

Профиль реактивности

TETRAETHYL LEAD decomposes under UV light. Reacts with fats; reacts violently with oxidizing agents, causing fire and explosion hazards. Attacks rubber [Handling Chemicals Safely 1980. p. 890].

Опасность

Toxic by ingestion, inhalation, and skin absorption. Central nervous system impairment. Questionable carcinogen.

Угроза здоровью

Extremely poisonous; may be fatal if inhaled, swallowed, or absorbed from the skin. Contact may cause burns to skin and eyes. Most symptoms of poisoning are due to the effects of tetraethyllead on the nervous system.

Пожароопасность

May explode in fires. Decomposes slowly at room temperature and more rapidly at elevated temperatures.

Профиль безопасности

Human poison by an unspecified route. Experimental poison by ingestion, intraperitoneal, intravenous, subcutaneous, and parented routes. Moderately toxic by inhalation and skin contact. Experimental teratogenic and reproductive effects. Questionable carcinogen with experimental carcinogenic data. Mutation data reported. Lead compounds are particularly toxic to the central nervous system. It is a solvent for fatty materials and has some solvent action on rubber as well. The fact that it is a lipoid solvent makes it an industrial hazard because it can cause intoxication not only by inhalation but also by absorption through the skin. Decomposes when exposed to sunlight or allowed to evaporate; forms triethyl lead, which is also a poisonous compound, as one of its decomposition products. May cause elemental lead intoxication by coming in contact with the skin. A combustible liquid when exposed to heat, flame, or oxidizers. Can react vigorously with oxidzing materials. Exposure to air for several days may cause explosive decomposition. To fight fire, use dry chemical, CO2, mist, foam. When heated to decomposition it emits toxic fumes of Pb. See also LEAD COMPOUNDS.

Возможный контакт

Tetraethyl lead is used as a component of antiknock mixes for gas and as an intermediate in making fungicides; Tetraethyl lead (used as an antiknock compound in gasoline) can also contains impurities, such as ethylene dibromide and ethylene dichloride.

Канцерогенность

A case-control study of former workers in a TEL-producing plant found a strong association between exposure to the TEL manufacturing process and rectal cancer (the odds ratio was 3.7 with 90% confidence limits of 1.3–10.2 for the analysis of ever/never exposed to TEL). An exposure–response relationship was noted with a fourfold elevation in the odds ratio at the high–very high cumulative exposure level. Similar results were obtained for cancers of the sigmoid colon. These results suggest to the authors that exposure to the TEL manufacturing process may have played a causal role in the colorectal cancer findings in this plant. However, IARC in 2006 has included organolead compounds (TEL and TML), with Lead and its Compounds in Group 3, not classifiable as to its carcinogenicity to humans.

Перевозки

UN1649 Motor fuel antiknock mixtures, Hazard Class: 6.1; Labels: 6.1-Poisonous materials.

Методы очистки

Its more volatile contaminants can be removed by exposure to a low pressure (by continuous pumping) for 1hour at 0o. Purify it by stirring with an equal volume of H2SO4 (d 1.40), keeping the temperature below 30o, repeating this process until the acid layer is colourless. It is then washed with dilute Na2CO3 and distilled water, dried with CaCl2 and fractionally distilled at low pressure under H2 or N2 [Calingaert Chem Rev 2 43 1926]. It prevents “knocking” in petrol combustion engines. [Milde & Beatty Adv Chem Res 23 306-318 1959, Beilstein 4 H 639.] VERY POISONOUS.

Несовместимости

Vapors may form explosive mixture with air. A strong reducing agent. Violent reaction with strong oxidizers, sulfuryl chloride; halogens, oils and fats; rust, potassium permanganate. Decomposes slowly in light and at room temperature, and more rapidly at temperatures above 110C. Attacks rubber and some plastics and coatings.

Утилизация отходов

Consult with environmental regulatory agencies for guidance on acceptable disposal practices. Generators of waste containing this contaminant (≥ 100 kg/mo) must conform with EPA regulations governing storage, transportation, treatment, and waste disposal. Controlled incineration with scrubbing for collection of lead oxides which may be recycled or land filled. It is also possible to recover alkyl lead compound from wastewaters as an alternative to disposal.