Shandong Hemao New Materials Co., Ltd
HM-3283A fluorination solution
Main technical parameters of HM-3283A
Project parameters
Clear appearance, colorless
Odor is tasteless
Boiling point 126 ℃
Density (25 ℃) 1.85g/ml
Dielectric constant (1MHz) 2.09
Dielectric strength (2.5mm)>35.7kV
Dielectric loss (1MHz) 0.00029
Surface tension 15.69mN/m
Freezing point -82 ℃
Saturated vapor pressure (20 ℃) 1.516kPa
Critical pressure 4.28MPa
Critical temperature 196.54 ℃
No flash point
Ozone Depletion Potential (ODP) 0
Global Warming Potential (GWP) 108
Specific heat (25 ℃) 1.107 J/(g. K)
Thermal conductivity coefficient (25 ℃) 0.0614W/(m.k)
Latent heat of vaporization 82.8KJ/kg
Kinematic viscosity (25 ℃) 1.376mm2/s
Volume resistivity (25 ℃) ≥ 1 × 1015 Ω. mm
HM-3283A Product Features
1. This product has ideal high insulation performance, high density, and high boiling point, and can be widely used in various temperature controlled heat dissipation systems;
2. Non hazardous materials are non flammable and non explosive, with no ignition point or flash point;
3. Good electrical insulation and extremely high breakdown voltage;
4. Low dielectric constant and dielectric loss, without affecting signal transmission;
5. Good fluidity, able to flow and dissipate heat well in the temperature control system;
6. Non toxic, harmless, and non irritating;
7. Environmentally friendly, with an extremely low GWP value and an ODP value of 0, without damaging ozone.
8. Insoluble with water to avoid damage to components caused by moisture.
HM-3283A Scope of Application
1. Heat transfer cooling working fluid for semiconductor dry etching, wafer testing, packaging, etc;
2. Various data processing electronic equipment with thermal conductivity and cooling working fluids;
3. Electronic product cleaning agents;
4. As an intermediate in the synthesis of fluorinated surfactants and other fluorinated chemicals;
China
