나BAM

한글명:나BAM

카스 번호142-59-6

상품명:NABAM

CBNumberCB7722794

분자식C4H6N2Na2S4

포뮬러 무게256.34

MOL 파일142-59-6.mol

동의어(한글)

나BAM

나BAM(NABAM)

화학적 성질

녹는점	76-80 °C
증기압	Negligible
저장 조건	0-6°C
용해도	메탄올(약간 용해됨), 물(약간 용해됨)
물리적 상태	고체
물리적 상태	단단한 모양
수용성	ca. 200g l^-1(상온)
색상	황백색에서 연한 노란색
Merck	13,6367
안정성	흡습성이 매우 높음
LogP	1.656 (est)
EPA	Nabam (142-59-6)

위험 및 안전 성명

위험품 표기	Xn,N
위험 카페고리 넘버	36/37/38-50/53-43-37-22
안전지침서	26-36/37/39-61-60-46-24/25-8
유엔번호(UN No.)	UN3077 9/PG 3
RTECS 번호	FA6825000
HS 번호	29302000
유해 물질 데이터	142-59-6(Hazardous Substances Data)
독성	LD50 orally in rats: 395 ±12 mg/kg (Smith)

그림문자(GHS)

나BAM 화학적 특성, 용도, 생산

화학적 성질
Colorless crystals when pure. Easily sol-uble in water.
용도
Nabam provides protection against fungal diseases of cotton, capsicums and onions when applied to soil.
정의
ChEBI: A dithiocarbamate salt that is the disodium salt of ethylenebis(dithiocarbamic acid). A fungicide, algicide and bactericide used on various crops including on cotton, capsicums, onions and rice crops, it is considered to be a carcinogen, so is not licensed for use within the European Union. Mixing nabam with zinc sulfate affords the fungicide zineb.
일반 설명
Colorless to light amber solid with a a slight odor. Mixes with water.
공기와 물의 반응
Water soluble. Decomposes in boiling hot to give poisonous hydrogen sulfide and flammable carbon disulfide.
반응 프로필
NABAM is a dithiocarbamate. Flammable gases are generated by the combination of thiocarbamates and dithiocarbamates with aldehydes, nitrides, and hydrides. Thiocarbamates and dithiocarbamates are incompatible with acids, peroxides, and acid halides.
위험도
Irritant to skin and mucous membranes, nar-cotic in high concentrations, use may be restricted.
건강위험
Contact with liquid irritates eyes and may cause mild to severe erythema of skin as well as sensitization reactions.
화재위험
Behavior in Fire: If water solution boils, poisonous hydrogen sulfide and highly flammable carbon disulfide vapors form.
농업용
Fungicide, Algaecide, Herbicide, Microbiocide: Nabam is a broad-spectrum fungicide/bactericide/ algaecide used to prevent crop damage by fungi, to protect harvested products from deterioration, and as an industrial microbiocide. As a result of the U.S. EPA review of nabam in 1989, all food uses were voluntarily canceled by the manufacturers except for one FDA-regulated food use on sugar mill grinding, crusher and/or diffuser systems, e.g., processing water systems. Registered only for nonfood application. Not approved for use in EU countries. Registered for use in the U.S. and Canada.
상품명
AMA-30®, Kemira Chemical (Finland); CAMBELL’S® NABAM SOIL FUNGICIDE; CARBON D®; NALCO D-62C44®; CHEM-BAM®; DITHANE A-40®; DITHANE A-46®; DITHANE D-14®[C]; NAFUN-IPO®; NALCO® D-62C44; PARZATE®; SPRING-BAK®
Safety Profile
intraperitoneal route. Experimental teratogenic and reproductive effects. Mutation data reported. When heated to decomposition it emits very toxic fumes of NOx, Na2O, and SOx. See also CARBAMATES.
잠재적 노출
Nabam is a broad spectrum dithiocarbamate fungicide/bactericide/algaecide/herbicide/microbiocide used to prevent crop damage by fungi, to protect harvested products from deterioration, and as an industrial microbiocide. As a result of the United States Environmental Protection Agency review of nabam in 1989, all food uses were voluntarily canceled by the manufacturers except for one FDA-regulated food use on sugar mill grinding, crusher, and/or diffuser systems, e.g., processing water systems. All other uses of nabam are for the control of algae, slime-forming bacteria, and fungi in indoor nonfood environments, paper mills, water cooling systems, drilling mud and packer fluids, and secondary oil recovery water system. Registered in the United States only for nonfood application.
신진 대사 경로
Nabam and other alkylenebis(dithi0carbamate) fungicides are degraded and metabolised via a common pathway. Limited information is available to describe the fate of nabam in soil and animals. Based on information generated with structurally similar compounds (see maneb, zineb), the initial degradation reaction of nabam in water and plants involves the dissociation of the metal complex and decomposition to numerous degradation products including ethylenethiourea (ETU) and ethyleneurea (EU) as major products (Scheme 1).
운송 방법
UN3077 Environmentally hazardous substances, solid, n.o.s., Hazard Class: 9; Labels: 9-Miscellaneous hazardous material, Technical Name Required.
Purification Methods
It crystallises (as hexahydrate) from aqueous ethanol. It is a skin irritant. [Beilstein 4 III 149, 4 IV 234.]
비 호환성
Combustible material. Dust may form explosive mixture in air, water, acid, oxidizing materials. Heat or contact with moisture or acids causes rapid decomposition and the generation of toxic and flammable hydrogen sulfide and carbon disulfide. Dithiocarbamate esters are combustible. They react violently with powerful oxidizers such as calcium hypochlorite. Poisonous gases are generated by the thermal decomposition of dithiocarbamate compounds, including carbon disulfide, oxides of sulfur, oxides of nitrogen, hydrogen sulfide, ammonia, and methylamine. Thio and dithiocarbamates slowly decompose in aqueous solution to form carbon disulfide and methylamine or other amines. Such decompositions are accelerated by acids. Flammable gases are generated by the combination of dithiocarbamate with aldehydes, nitrides, and hydrides. Dithiocarbamate are incompatible with acids, peroxides, and acid halides. Corrosive to iron, copper, brass, and zinc metals, especially in the presence of moisture. Heat alkalies (lime), moisture can cause decomposition. Decomposes on prolonged storage; by moisture, light, and heat. Degradation produces ethylene thiourea.
폐기물 처리
Do not discharge into drains or sewers. Dispose of waste material as hazardous waste using a licensed disposal contractor to an approved landfill. Consult with environmental regulatory agencies for guidance on acceptable disposal practices. Generators of waste containing this contaminant (≥100 kg/mo) must conform with EPA regulations governing storage, transportation, treatment, and waste disposal. A potential candidate for liquid injection incineration at a temperature range of 650 1600℃ and a residence time 0.1-2 seconds. Also, a potential candidate for rotary kiln incineration at a temperature range of 820 1600℃ and residence times of seconds for liquids and gases, and hours for solids.

나BAM 준비 용품 및 원자재

나BAM 공급 업체

나BAM 관련 검색

Send Inquriy