tert-ブチルジフェニルクロロシラン

危険有害性情報のコード(GHS)

• 絵表示(GHS)

  

• 注意喚起語

  Danger

• 危険有害性情報

  H314：重篤な皮膚の薬傷?眼の損傷

  H335：呼吸器への刺激のおそれ

• 注意書き

  P261：粉じん/煙/ガス/ミスト/蒸気/スプレーの吸入を避ける こと。

  P271：屋外または換気の良い場所でのみ使用すること。

  P280：保護手袋/保護衣/保護眼鏡/保護面を着用するこ と。

  P301+P330+P331：飲み込んだ場合：口をすすぐこと。無理に吐かせ ないこと。

  P303+P361+P353：皮膚（または髪）に付着した場合：直ちに汚染された衣 類をすべて脱ぐこと/取り除くこと。皮膚を流水/シャワー で洗うこと。

  P305+P351+P338：眼に入った場合：水で数分間注意深く洗うこと。次にコ ンタクトレンズを着用していて容易に外せる場合は外す こと。その後も洗浄を続けること。

tert-ブチルジフェニルクロロシラン 価格

MSDS Information

• tert-Butylchlorodiphenylsilane

tert-ブチルジフェニルクロロシラン 化学特性,用途語,生産方法

• 外観

  僅かにうすい黄色～暗赤色、液体

• 用途

  アルコールの保護シリル化剤。

• 使用上の注意

  不活性ガス封入。

• 化学的特性

  Tert-Butylchlorodiphenylsilane is a colorless to pale brown oily liquid with pungent odor, may be used as silylating agent for derivatization of alcohols, ketones, carboxylic acids, amines, amides and mercaptanes selectively into functional groups in different sterical environments.

• 物理的性質

  colorless liquid, bp 93–95°C/0.015 mmHg; n20 D 1.5680; d 1.057 g cm3.

• 使用

  Several newmethods have been developed for using the reagent to protect primary and secondary alcohols as their TBDPS ethers. In the presence of ammonium nitrate or ammonium perchlorate, reaction between TBDPS-Cl and a primary alcohol, such as benzyl alcohol, in DMF provided excellent yields of the corresponding silyl ethers in just 15 min (eq 1).19 When silver nitrate was used as promoter, the reactions gave inferior yields under otherwise identical conditions.
  When TBDPS-Cl is used to react with hemiacetals, it converts hemiacetals into ring-opened silyl ether carbonyl compounds, instead of mixed acetals.Presumably, the sizable TBDPS group presents too much steric hindrance for the formation of the corresponding mixed silyl acetals.

• 主な応用

  tert-Butylchlorodiphenylsilane (TBDPSCl) is a good reagent for chemical reaction, widely used in the fields of organic synthesis, thin film materials and medicine. The main applications are as follows:
  (1) It can be used for the preparation of T - SSBR (SSBR end - capped by tert - Butylchlorodiphenylsilane). Since TBCSi end sealing can fix the free chain ends of T-SSBR (that is, reduce the frictional loss of molecular chains and generate a greater orientation degree in the force field), and adsorb carbon black, the performance of T-SSBR composites is superior to that of SSBR. Moreover, the performance of styrene-TBCSi terminated T-SSBR (TS-SSBR) is much better than that of butadiene-TBCSi terminated T-SSBR (TB-SSBR). Therefore, the former is applicable to the tread of green tires.^[1]
  (2) TBDPSCl can be used to prepare fluorene-based polyimides (Si-PIs) containing silyl ether groups by silylation with hydroxyl-containing polyimides (OH-PIs). The optical, dielectric and solubility properties of the modified Si-PI films are simultaneously improved compared to the precursor OH-PI films. The modified Si–PI films demonstrate a meaningful enhancement in the transmittances at a wavelength of 400 nm (T400) to 74–81% from 42 to 55% of OH–PI films and the regeneration of fluorescence characteristics. The dielectric constant and loss of Si–PI films are also obviously reduced to 2.63–2.75 and 0.0024–0.0091 at 1 kHz from 4.19 to 4.78 and 0.0173–0.0295 of OH–PI films, respectively, due to substituted with the bulky nonpolar TBDPS groups to increase the free volume and hydrophobicity of Si–PI films. The solubility of Si–PIs in low- or nonpolar solvents (such as CHCl3, CH2Cl2, acetone, and toluene) is significantly improved. Furthermore, Si–PI films still maintain relatively good thermal properties with the 5% weight loss temperature (T5%) in the range 470–491 °C under a nitrogen atmosphere and the glass transition temperature (Tg) in the range 245–308 °C.^[2]

• 製造方法

  a dry 1 L, three-necked round bottomed flask is equipped with a magnetic stirring bar, a 500mL equalizing dropping funnel fitted with a rubber septum, a reflux condenser, and nitrogen inlet tube. The flask is flushed with nitrogen, then charged with 127 g (0.5 mol) of diphenyldichlorosilane in 300mL of redistilled pentane. A solution of tbutyllithium in pentane (500 mL, 0.55 mol), is transferred under nitrogen pressure to the dropping funnel using a stainless steel, double-tip transfer needle. This solution is slowly added to the contents of the flask and when the addition is complete, the mixture is refluxed 30 h under nitrogen with stirring. The suspension is allowed to cool to rt, the precipitated lithium chloride is rapidly filtered through a pad of Celite, and the latter is washed with 200mL of pentane. The solvent is removed by evaporation, and the colorless residue is distilled through a short (10 cm), Vigreux column, to give 125–132 g of the colorless title compound.

• 純化方法

  Purify it by repeated fractional distillaton. It is soluble in DMF and pentane [Hanessian & Lavalee Can J Chem 53 2975 1975, Robl et al. J Med Chem 34 2804 1991]. [Beilstein 4 IV 4076 for tert-butylchlorodimethylsilane.]

tert-ブチルジフェニルクロロシラン 上流と下流の製品情報

tert-ブチルジフェニルクロロシラン 生産企業

Global(531)Suppliers

tert-ブチルジフェニルクロロシラン スペクトルデータ(¹HNMR、¹³CNMR、IR1、MS、Raman)

58479-61-1, tert-ブチルジフェニルクロロシラン キーワード