2,2-ビス(4-ヒドロキシ-3-メチルフェニル)プロパン

危険有害性情報のコード(GHS)

• 絵表示(GHS)

  

• 注意喚起語

  Warning

• 危険有害性情報

  H315：皮膚刺激

  H319：強い眼刺激

  H335：呼吸器への刺激のおそれ

• 注意書き

  P261：粉じん/煙/ガス/ミスト/蒸気/スプレーの吸入を避ける こと。

  P264：取扱い後は皮膚をよく洗うこと。

  P264：取扱い後は手や顔をよく洗うこと。

  P271：屋外または換気の良い場所でのみ使用すること。

  P280：保護手袋/保護衣/保護眼鏡/保護面を着用するこ と。

  P302+P352：皮膚に付着した場合：多量の水と石鹸で洗うこと。

  P305+P351+P338：眼に入った場合：水で数分間注意深く洗うこと。次にコ ンタクトレンズを着用していて容易に外せる場合は外す こと。その後も洗浄を続けること。

2,2-ビス(4-ヒドロキシ-3-メチルフェニル)プロパン 価格

MSDS Information

• 2,2-Bis(4-hydroxy-3-methylphenyl)propane

2,2-ビス(4-ヒドロキシ-3-メチルフェニル)プロパン 化学特性,用途語,生産方法

• 外観

  白色～ほとんど白色粉末～結晶

• 説明

  2,2-Bis(4-hydroxy-3-methylphenyl)propane is a monomer of polycarbonate and bisphenol A. It has been used as a reaction solution for sodium salt and calcium stearate. The product contains hydrogen chloride and hydrochloric acid as byproducts. This product also reacts with fatty acids to produce aromatic hydrocarbons.

• 化学的特性

  Powder or crystalline or crystalline powder or chunks

• 使用

  Used as a color-developer in thermosensitive recording materials.

• 製造方法

  The preparation of 2,2-Bis(4-hydroxy-3-methylphenyl)propane is as follows:In a full-jacket type 1 L separable flask equipped with a thermometer, a stirrer, and a 100 mL dropping funnel, 26.1 g (0.4 mol) of isopropyl alcohol was added under a nitrogen atmosphere, and then 58.3 g (0.5 mol) of 90% by weight sulfuric acid was slowly added thereto. Thereafter, 54.5 g of toluene, 191.5 g (1.8 mol) of ortho-cresol, and 5.5 g (0.03 mol) of dodecanethiol were added thereto, followed by setting the temperature in the separable flask to 40° C. In the dropping funnel, 42.5 g (0.7 mol) of acetone was placed, and it was slowly fed dropwise to the separable flask for 30 minutes. After completion of the dropwise addition of acetone, the reaction was allowed to proceed at 40° C. for 2 hours. After completion of the reaction, 100.0 g of toluene and 100.0 g of demineralized water were fed, and the temperature was increased to 80° C. After the temperature reached 80° C., the reaction liquid was left to stand to confirm that the precipitates generated during the reaction were dissolved into the organic phase and the aqueous phase. This was followed by extraction of the aqueous phase in the lower layer. Thereafter, saturated sodium hydrogen carbonate solution was added to the obtained organic phase to allow neutralization, followed by confirming that the pH of the aqueous phase in the lower layer, became not less than 9. After extraction of the aqueous phase in the lower layer, demineralized water was added to the obtained organic phase, and the resulting mixture was stirred for 10 minutes. Thereafter, the mixture was left to stand, and the aqueous phase was extracted. Part of the obtained organic phase was removed, and subjected to high-performance liquid chromatography to analyze the amount of bisphenol C produced. As a result, the reaction yield in terms of acetone was found to be 84 mol %.

  

2,2-ビス(4-ヒドロキシ-3-メチルフェニル)プロパン 生産企業

Global(196)Suppliers

2,2-ビス(4-ヒドロキシ-3-メチルフェニル)プロパン スペクトルデータ(¹HNMR、¹³CNMR、IR1、IR2、MS、Raman)

79-97-0, 2,2-ビス(4-ヒドロキシ-3-メチルフェニル)プロパン キーワード