Trichlor(methyl)silan

Gefahreninformationscode (GHS)

• Bildanzeige (GHS)

  

• Alarmwort

  Achtung

• Gefahrenhinweise

  H225：Flüssigkeit und Dampf leicht entzündbar.

  H314：Verursacht schwere Verätzungen der Haut und schwere Augenschäden.

  H331：Giftig bei Einatmen.

  H335：Kann die Atemwege reizen.

• Sicherheit

  P210：Von Hitze, heißen Oberflächen, Funken, offenen Flammen und anderen Zündquellenarten fernhalten. Nicht rauchen.

  P280：Schutzhandschuhe/Schutzkleidung/Augenschutz tragen.

  P301+P312：BEI VERSCHLUCKEN: Bei Unwohlsein GIFTINFORMATIONSZENTRUM/Arzt/... (geeignete Stelle für medizinische Notfallversorgung vom Hersteller/Lieferanten anzugeben) anrufen.

  P303+P361+P353：BEI BERÜHRUNG MIT DER HAUT (oder dem Haar): Alle kontaminierten Kleidungsstücke sofort ausziehen. Haut mit Wasser abwaschen oder duschen.

  P305+P351+P338：BEI KONTAKT MIT DEN AUGEN: Einige Minuten lang behutsam mit Wasser spülen. Eventuell vorhandene Kontaktlinsen nach Möglichkeit entfernen. Weiter spülen.

Methyltrichlorosilane Chemische Eigenschaften,Einsatz,Produktion Methoden

• ERSCHEINUNGSBILD

  FARBLOSE FLüSSIGKEIT MIT STECHENDEM GERUCH.

• PHYSIKALISCHE GEFAHREN

  Die Dämpfe sind schwerer als Luft und können sich am Boden ausbreiten. Fernzündung möglich.

• CHEMISCHE GEFAHREN

  Zersetzung beim Verbrennen unter Bildung von Chlorwasserstoff. Reagiert sehr heftig mit starken Oxidationsmitteln. Reagiert sehr heftig mit Wasser und feuchter Luft unter Bildung von Chlorwasserstoff (s. ICSC-Nr. 0163). Greift Metalle wie Aluminium und Magnesium an.

• ARBEITSPLATZGRENZWERTE

  TLV nicht festgelegt (ACGIH 2005).
  MAK nicht festgelegt (DFG 2005).
  

• AUFNAHMEWEGE

  Aufnahme in den Körper durch Inhalation und durch Verschlucken.

• INHALATIONSGEFAHREN

  Nur ungenügende Angaben vorhanden über die Geschwindigkeit, mit der eine gesundheitsschädliche Konzentration in der Luft beim Verdampfen bei 20°C erreicht wird.

• WIRKUNGEN BEI KURZZEITEXPOSITION

  WIRKUNGEN BEI KURZZEITEXPOSITION:
  Die Substanz verätzt die Augen, die Haut und die Atemwege. ätzend beim Verschlucken. Inhalation der Substanz kann zu Lungenödem führen (s.Anm.). Exposition kann zum Tod führen. ärztliche Beobachtung notwendig. (s.Anm.)

• LECKAGE

  Gefahrenbereich verlassen! Fachmann zu Rate ziehen! Ausgelaufene Flüssigkeit in abdichtbaren, trockenen Behältern sammeln.Keine Kunststoffbehälter verwenden. Reste mit trockenem Sand oder inertem Absorptionsmittel aufnehmen und an einen sicheren Ort bringen. NICHT in die Kanalisation spülen. Persönliche Schutzausrüstung: Vollschutzanzug mit umgebungsluftunabhängigem Atemschutzgerät.

• R-Sätze Betriebsanweisung:

  R11:Leichtentzündlich.
  R14:Reagiert heftig mit Wasser.
  R36/37/38:Reizt die Augen, die Atmungsorgane und die Haut.

• S-Sätze Betriebsanweisung:

  S26:Bei Berührung mit den Augen sofort gründlich mit Wasser abspülen und Arzt konsultieren.
  S39:Schutzbrille/Gesichtsschutz tragen.

• Beschreibung

  Methyltrichlorosilane is a colorless liquid witha sharp hydrochloric acid-like odor. Molecularweight 5 149.48; Boiling point = 66℃; Freezing/Meltingpoint 5290℃; Vapor pressure 5 146.7 mmHg at 18℃;Flash point = 2 6.2℃; 2 8℃ (cc); Autoignition temperature $404℃. Explosive limits: LEL 5 7.6%; UEL $20%.Hazard Identification (based on NFPA-704 M RatingSystem): Health 3, Flammability 3, Reactivity 2 . Reactswith water.

• Chemische Eigenschaften

  Colorless clear liquid

• Physikalische Eigenschaften

  bp 66 °C; d 1.273 g cm?3.

• Verwenden

  Methyltrichlorosilane is widely used as precursor to organosilicon compounds; silylating agent and Lewis acid. MeSiCl3 is an effective Lewis acid in the condensation of carboxylic acids with alcohols and amines.

• Verwenden

  Intermediate for silicones.

• Verwenden

  Methyltrichlorosilane is used in production of methyl silicone resins, its vapor reacts with water on surfaces to give a thin layer of methylpolysiloxane which make it a water-repellent film. A combination of methyltrichlorosilane and sodium iodide can be used to cleave carbon-oxygen bonds such as methyl ethers. It is used as a precursor for forming various cross-linked siloxane polymers. Trichloromethylsilane is the starting material for the production of pure silicon for manufacture of semiconductors and optical fibers.

• Vorbereitung Methode

  Produced by Grignard reaction of silicon tetrachloride and methylmagnesium chloride.

• Allgemeine Beschreibung

  A colorless fuming liquid with a pungent odor. Flash point 8°F. Vapor and liquid may cause burns. Denser than water. Vapors are heavier than air.

• Reaktivität anzeigen

  Chlorosilanes, such as Methyltrichlorosilane, are compounds in which silicon is bonded to from one to four chlorine atoms with other bonds to hydrogen and/or alkyl groups. Chlorosilanes react with water, moist air, or steam to produce heat and toxic, corrosive fumes of hydrogen chloride. They may also produce flammable gaseous H2. They can serve as chlorination agents. Chlorosilanes react vigorously with both organic and inorganic acids and with bases to generate toxic or flammable gases.

• Hazard

  Flammable, dangerous fire risk, may formexplosive mixture with air. Strong irritant.

• Health Hazard

  As with other chlorosilanes, acute exposures may be highly toxic and may cause death or permanent injury after very short exposures to small quantitites. Chronic exposures may be moderately toxic and involve irreversible and reversible changes. Skin contact may produce severe burns with pain and risk of secondary infections. Ingestion may produce oral, esophageal, and stomach burns, intensity will vary from mild to very severe, gastrointestinal damage is rare but may occur.

• Brandgefahr

  Toxic hydrogen chloride and phosgene gases may form in fires. Reacts with water or steam to form hydrochloric acid. Vapor forms flammable mixture with air. May form explosive mixture in air. Avoid contact with water or moist air.

• Sicherheitsprofil

  Poison by inhalation and intraperitoneal routes. Moderately toxic by ingestion. A severe irritant to skin, eyes, and mucous membranes. Flammable when exposed to heat or flame; can react vigorously with oxidizing materials. When heated to decomposition it emits toxic fumes of Cl-.

• mögliche Exposition

  PrimaryIrritant. Methyltrichlorosilane is used as an intermediate tomake silicones; for making water repellants, electrical insulation, heat-resistant paints, and other products.

• Erste Hilfe

  If this chemical gets into the eyes, remove anyContact lenses at once and irrigate immediately for at least[5 min, occasionally Iifting upper and lower lids. Seek med-ical attention immediately. If this chemical contacts theskin, remove contaminated clothing and wash immediatelywith soap and water. Seek medical attention immediately. Ifthis chemical has been inhaled, remove from exposure.begin rescue breathing (using universal precautions, includ-ing resuscitation mask) if breathing has stopped and CPR iheart action has stopped. Transfer promptlyto a medicalfacility. When this chemical has been swallowed, get medi-attention. If victim is conscious, administer water ormilk. Do not induce vomiting. Medical observation isrecommended for 24- 48h after breathing overexposure, aspulmonary edema may be delayed. As first aid for pulmo-nary edema, a doctor or authorized paramedic may consideradministering a corticosteroid spray.

• Lager

  Color Code—Red: Flammability Hazard: Store ina flammable liquid storage area or approved cabinet awayfrom ignition sources and corrosive and reactive materials.Prior to working with this chemical you should be trainedon its proper handling and storage. Before entering confinedspace where this chemical may be present, check to makesure that an explosive concentration does not exist.Methyltrichlorosilane must be stored to avoid contact withwater, acids, chemically active metals (such as potassium,sodium, magnesium, and zinc), and alkalis since violentreactions occur and hydrogen chloride is produced. Store intightly closed containers in a cool, well-ventilated areaaway from heat. Sources of ignition, such as smoking andopen flames, are prohibited where methyltrichlorosilane ishandled, used, or stored. Metal containers involving thetransfer of 5 gallons or more of methyltrichlorosilaneshould be grounded and bonded. Drums must be equippedwith self-closing valves, pressure vacuum bungs, and flamearresters. Use only nonsparking tools and equipment, especially when opening and closing containers of methyltrichlorosilane. Wherever methyltrichlorosilane is used,handled, manufactured, or stored, use explosion-proof electrical equipment and fittings.

• Versand/Shipping

  This compound requires a shipping label of“FLAMMABLE LIQUID, CORROSIVE.” It falls inHazard Class 3 and Packing Group I

• läuterung methode

  Methyl trichlorosilane [75-79-6] M 149.5, b 13,7o/101mm, 64.3o/710.8mm, 65.5o/745mm, 6 6 . 1o/atm, d 4 1.263, n D If very pure, distil it before use. 20 1.4110. The purity is checked by NMR ( in MeCN is 13.14ppm with respect to Me4Si). Possible contaminants are other silanes which can be removed by fractional distillation through a Stedman column (p 11) of >72 theoretical plates with total reflux and 0.35% take-off. This apparatus should be under N2 gas at a rate of 12 bubbles/minute fed into the line using an Hg manometer to control the pressure. It is sensitive to H2O. [Gillam et al. J Am Chem Soc 73 4252 1951, Olah et al. J Org Chem 48 3667 1983, Beilstein 4 IV 4212.]

• Inkompatibilitäten

  Water, steam, acids, alkalis, chemicallyactive metals (potassium, sodium, magnesium, and zinc).Reacts violently with strong oxidizers. Reacts violentlywith water, moisture, and alkalis producing hydrogen chloride. Attacks metals, such as aluminum, magnesium.

Methyltrichlorosilane Upstream-Materialien And Downstream Produkte

Trichlor(methyl)silan Anbieter Lieferant Produzent Hersteller Vertrieb Händler.

Global(302)Suppliers

75-79-6, Methyltrichlorosilane Verwandte Suche: