Trichlorpentylsilan

Gefahreninformationscode (GHS)

• Bildanzeige (GHS)

  

• Alarmwort

  Achtung

• Gefahrenhinweise

  H226：Flüssigkeit und Dampf entzündbar.

  H311：Giftig bei Hautkontakt.

  H314：Verursacht schwere Verätzungen der Haut und schwere Augenschäden.

  H331：Giftig bei Einatmen.

• Sicherheit

  P261：Einatmen von Staub vermeiden.

  P280：Schutzhandschuhe/Schutzkleidung/Augenschutz tragen.

  P305+P351+P338：BEI KONTAKT MIT DEN AUGEN: Einige Minuten lang behutsam mit Wasser spülen. Eventuell vorhandene Kontaktlinsen nach Möglichkeit entfernen. Weiter spülen.

  P310：Sofort GIFTINFORMATIONSZENTRUM/Arzt/ anrufen.

Amyltrichlorosilane (mixed isomers)(Pentyltrichlorosilane) Chemische Eigenschaften,Einsatz,Produktion Methoden

• R-Sätze Betriebsanweisung:

  R10:Entzündlich.
  R14:Reagiert heftig mit Wasser.
  R23/24:Giftig beim Einatmen und bei Berührung mit der Haut.
  R34:Verursacht Verätzungen.

• S-Sätze Betriebsanweisung:

  S16:Von Zündquellen fernhalten - Nicht rauchen.
  S26:Bei Berührung mit den Augen sofort gründlich mit Wasser abspülen und Arzt konsultieren.
  S36:DE: Bei der Arbeit geeignete Schutzkleidung tragen.
  S45:Bei Unfall oder Unwohlsein sofort Arzt zuziehen (wenn möglich, dieses Etikett vorzeigen).

• Beschreibung

  Amyl trichlorosilane is a colorless to yellowish liquid with a sharp acrid odor (like hydrochloric acid).Molecular weight= 205.63; Boiling point= 168℃;Specific gravity= 1.137 at 25℃; Liquid surface tension= 5(estimate) 0.020 N/m at 20℃; Relative vapor density(air= 1) 5 7.1; Latent heat of vaporization= 2.02 3 105J/kg; Heat of combustion 5 2 154 3 105 J/kg; Heat ofsolution: 4.0 3 105 J/kg; Flash point= 30℃. NFPA 704 MHazard Identification (based on NFPA-704 M RatingSystem): Health 3, Flammability 2, Reactivity 2 . Reactswith water.

• Chemische Eigenschaften

  Colorless to yellow liquid. Readily hydrolyzed by moisture with the liberation of hydrogen chloride. Combustible.

• Chemische Eigenschaften

  Amyl trichlorosilane is a colorless to yellowish liquid with a sharp acrid odor (like hydrochloric acid).

• Verwenden

  Intermediate for silicones.

• Allgemeine Beschreibung

  A colorless to yellow liquid with a pungent odor. Amyltrichlorosilane (mixed isomers)(Pentyltrichlorosilane) is combustible and has a flash point of 145°F. Corrosive to metals and tissue.

• Reaktivität anzeigen

  Chlorosilanes, such as Amyltrichlorosilane (mixed isomers)(Pentyltrichlorosilane), are compounds in which silicon is bonded to from one to four chlorine atoms with other bonds to hydrogen and/or alkyl groups. Chlorosilanes react with water, moist air, or steam to produce heat and toxic, corrosive fumes of hydrogen chloride. They may also produce flammable gaseous H2. They can serve as chlorination agents. Chlorosilanes react vigorously with both organic and inorganic acids and with bases to generate toxic or flammable gases.

• Hazard

  Toxic and corrosive.

• Health Hazard

  Inhalation causes irritation of mucous membrane. Contact of liquid with eyes or skin causes severe burns, and ingestion causes severe burns of mouth and stomach.

• Sicherheitsprofil

  Moderately toxic by ingestion and skin contact. Mildly toxic by inhalation. A corrosive irritant to the eyes, skin, and mucous membranes. When heated to decomposition it emits toxic fumes of Cl-. See also CHLOROSILANES

• mögliche Exposition

  It is used to make silicones.

• Erste Hilfe

  If this chemical gets into the eyes, remove anycontact lenses at once and irrigate immediately for at least15 min, occasionally lifting upper and lower lids. Seek medical attention immediately. If this chemical contacts theskin, remove contaminated clothing and wash immediatelywith soap and water. Seek medical attention immediately. Ifthis chemical has been inhaled, remove from exposure,begin rescue breathing (using universal precautions, including resuscitation mask) if breathing has stopped and CPR ifheart action has stopped. Transfer promptly to a medicalfacility. When this chemical has been swallowed, get medical attention. If victim is conscious, administer water ormilk. Do not induce vomiting. Medical observation isrecommended for 24°48 h after breathing overexposure, aspulmonary edema may be delayed. As first aid for pulmonary edema, a doctor or authorized paramedic may consideradministering a corticosteroid spray.

• Lager

  Color Code—White: Corrosive or ContactHazard; Store separately in a corrosion-resistant location.Prior to working with this chemical you should be trainedon its proper handling and storage. Store in tightly closedcontainers in a cool, well-ventilated area. Metal containersinvolving the transfer of this chemical should be groundedand bonded. Where possible, automatically pump liquidfrom drums or other storage containers to process containers. Drums must be equipped with self-closing valves,pressure vacuum bungs, and flame arresters. Use only nonsparking tools and equipment, especially when openingand closing containers of this chemical. Sources of ignition, such as smoking and open flames, are prohibitedwhere this chemical is used, handled, or stored in a mannerthat could create a potential fire or explosion hazard.

• Versand/Shipping

  UN1728 Amyltrichlorosilane, Hazard class: 8; Labels: 8-Corrosive material.

• Inkompatibilitäten

  Incompatible with oxidizers (chlorates, nitrates, peroxides, permanganates, perchlorates, chlorine, bromine, fluorine, etc.); contact may cause fires or explosions. Keep away from alkaline materials, strong bases, strong acids, oxoacids, epoxides. Chlorosilanes react vigorously with bases and both organic and inorganic acids generating toxic and/or flammable gases. Chlorosilanes react with water, moist air, or steam releasing heat and toxic, corrosive fumes of hydrogen chloride. They may also produce flammable gaseous hydrogen. Attacks metals in the presence of moisture.

Trichlorpentylsilan Anbieter Lieferant Produzent Hersteller Vertrieb Händler.

Global(56)Suppliers

107-72-2, Amyltrichlorosilane (mixed isomers)(Pentyltrichlorosilane) Verwandte Suche: