AZIMILIDE

Gefahreninformationscode (GHS)

• Bildanzeige (GHS)

  

• Alarmwort

  Warnung

• Gefahrenhinweise

  H302：Gesundheitsschädlich bei Verschlucken.

• Sicherheit

  P280：Schutzhandschuhe/Schutzkleidung/Augenschutz tragen.

  P305+P351+P338：BEI KONTAKT MIT DEN AUGEN: Einige Minuten lang behutsam mit Wasser spülen. Eventuell vorhandene Kontaktlinsen nach Möglichkeit entfernen. Weiter spülen.

AZIMILIDE Chemische Eigenschaften,Einsatz,Produktion Methoden

• Originator

  Stedicor,Procter and Gamble

• Verwenden

  Cardiac depressant (anti-arrhythmic).

• Definition

  ChEBI: Azimilide is an imidazolidine-2,4-dione.

• Manufacturing Process

  1-Phenylmethylenamino-3-(4-chlorobutyl)-2,4-imidazolidinedione dihydrochloride is prepared by adding 60% sodium hydride in mineral oil (7.8 g, 0.1944 mole) over 1 h to a stirred solution o f 1- (benzy1ideneamino)hydantoin [prepared as described by J. Gut, A Novacet, and P. Fiedler, Coll. Czech. Chern. Comrnun., Vol. 33, pp. 2087-2096, No. 71, 1968] (39.5 g , 0.1944 mole) in dimethyl formamide (1000 ml). After complete addition, the solution is heated at steam bath temperature (approximately 100°C) for 1.5 h. The resulting mixture is allowed to cool to room temperature (30°C).
  While stirring at room temperature, 1-bromo-4-chlorobutane (100 g ,0.5832 mole, 3 eq.) is added in one portion. The mixture becomes exothermic reaching around 35°C in approximately 30 min. The near-solution is heated a t approximately 80°C by steam bath for 4 h, cooled and stirred for approximately 8 h at room temperature (30°C). The cloudy mixture is filtered, removing a small amount of insoluble solid. The filtrate is concentrated under reduced pressure to a semi-solid residue. This residue is triturated with H2O (400 ml), collected, recrystallized from acetonitrile, and then air-dried to give 43.1 g (0.1467 mole) of 1-phenylmethyleneamino-3-(4-chlorobutyl)-2,4- imidazolidinedione.
  A mixture of 1-phenylmethyleneamino-3-(4-chlorobutyl)-2,4- imidazolidinedione (43.1 g, 0.1467 mole), acetone (1200 ml) and sodium iodide (48.4 9, 0.3227 mole) is heated to reflux. Reflux is maintained for 5 h. The mixture is filtered, collecting the insoluble. The filtrate is recharged with sodium iodide (10.0 g) and reflux is resumed and is maintained for 15 h. After cooling to room temperature, the mixture is filtered, removing the insoluble NaCl (total recovery, 9.5 g, 110%). The filtrate is poured into H2O (2000 ml) while stirring. After stirring for 30 min, the solid is collected and air-dried to yield 51.5 g (0.1337 mole) of 1-phenylmethyleneamino-3-(4-iodobutyl)-2,4- imidazolidinedione.
  A solution of 1-phenylmethyleneamino-3-(4-iodobutyl)-2,4-imidazolidinedione (10.0 g, 0.0260 mole), dimethylformamide (150.0 mg) and 1- methylpiperazine (11.5 ml, 10.4 9, 0.1040 mole) is heated to reflux. Reflux is maintained for 3 h. After cooling to approximately 40°C, the solution is concentrated under reduced pressure by rotary evaporator to an oily-solid residue. This residue is dissolved in H2O (200 ml) then made basic with saturated NaHCO3 (200 ml). The resulting mixture is stirred for 2 h. The solid is collected and air-dried, and is next dissolved in absolute ethanol (150 ml), next filtered, then made acidic to wet litmus with EtOH/HCl. After cooling several hours, the solid is collected and air-dried to give 8.04 g (0.0187 mole) of 1-phenylmethyleneamino-3-[4-(4-methyl-1-piperazinyl)butyl]-2,4- imidazolidinedione dihydrochloride.
  A mixture of 1-phenylmethyleneamino-3-[4-(4-methyl-1-piperazinyl)butyl]- 2,4-imidazolidinedione dihydrochloride (8.04 g, 0.0187 mole), 2 N HCl (125 ml) and 5% Pd/C: 50% H2O (1.5 g) is subjected to hydrogen on a Parr apparatus at 40 psi at room temperature. After 2 h, the catalyst is removed by filtration. The filtrate is divided into two equal portions. Each is concentrated under reduced pressure on a rotary 10 evaporator to an oily residue of 1-amino-3-[4-(4-methyl-1-piperazinyl)butyl]-2,4-imidazolidinedione hydrochloride.
  A solution of 1-amino-3-[4-(4-methyl-1-piperazinyl)butyl]-2,4- imidazolidinedione hydrochloride (0.0094 mole), dimethylformamide (75 ml) and 5-(4-chlorophenyl)-2-furancarboxaldehyde [prepared as described in U.S. Patent No. 20 4,882,354, to Huang et al., assigned to Norwich Eaton Pharmaceuticals, Inc., issued November 21, 1984, see Cols. 7 and 8] (1.94 g , 0.0094 mole) is stirred at room temperature for 72 h. The mixture is filtered, collecting the solid. Recrystallization from absolute ethanol/H2O and air-drying gives 2.63 g (0.0050 mole) of 1-[[[5-(4-chlorophenyl)-2- furanyl]methylene]amino]3-[4-(4-methyl-1

• Therapeutic Function

  Antiarrhythmic

• Allgemeine Beschreibung

  Azimilide, E-1-[[[5-(4-chlorophenyl)-2-furanyl]methylene]amino]-3-[4-(4-methyl-1-piperazinyl)butyl]-2,4-imidazolidinedione, is a class III agent that significantlyblocks the delayed rectifier potassium current,Iks, including the Ikr component. Its ability to block multichannelsmay be caused by a lack of the methane sulfonamidegroup that is common to other class III agents, whichselectively block the Ikr potassium current. It is believedthat blocking both Ikr and Iks potassium currents yields consistentclass III antiarrhythmic effects at any heart rate.

• Clinical Use

  Azimilde is another Class III antiarrhythmic agent structurally unrelated to any of the above agents. Azimilide is not available in the United States; it is only available in Europe. Following oral administration, the drug is completely absorbed, with no effect of food. Protein binding is 94%. It is metabolized in the liver to an active carboxylate metabolite, but its concentration in plasma is less than 5% of the parent compound. Thus, it is considered to be therapeutically inactive. Renal excretion is approximately 10%. Its elimination half-life is 3 to 4 days.

• Enzyminhibitor

  This class ΙΙΙ antiarrhythmic drug and ion channel blocker (FW = 457.95 g/mol; CAS 149908-53-2), also known by the code name NE-10064 and systematic name, 1-({(E)-[5-(4-chlorophenyl)furan-2-yl]methylidene} amino)-3-[4-(4-methylpiperazin-1-yl)butyl]-imidazolidine-2,4-dione, blocks both the slow-activating IKs and rapidly activating IKr components of the delayed rectifier potassium current, distinguishing its action from conventional potassium channel blockers such as sotalol and dofetilide,which block only IKr. Azimilide prolongs the cardiac refractory period in a dose-dependent manner, as manifested by increases in action potential duration, QTc interval, and effective refractory period.

AZIMILIDE Upstream-Materialien And Downstream Produkte

AZIMILIDE Anbieter Lieferant Produzent Hersteller Vertrieb Händler.

Global(63)Suppliers