7782-61-8

Raw materials And Preparation Products

Hazard Information

Material Safety Data Sheet(MSDS)

Questions And Answer

• Description

  Iron(III) Nitrate Nonahydrate is a highly water soluble crystalline Iron source for uses compatible with nitrates and lower (acidic) pH. All metallic nitrates are inorganic salts of a given metal cation and the nitrate anion. The nitrate anion is a univalent (-1 charge) polyatomic ion composed of a single nitrogen atom ionically bound to three oxygen atoms (Formula: NO3) for a total formula weight of 62.05.;

• Uses

  Ferric nitrate nonahydrate can be used as catalyst, mordant, metal surface treatment agent, oxidant, analytical reagent, radioactive substance adsorbent.

  ;

• analysis method

  Weigh 1~1.5g sample (accurate to 0.0001g) into a 250ml dry iodine measuring flask, and record the weight m. Add 20ml of water, 3g of potassium iodide, and 10ml of sulfuric acid solution (10%), and shake it up to dissolve completely, place in a dark place for 10-15 minutes, add about 80ml of water, titrate with sodium thiosulfate standard titration solution, and add when near the end 3ml starch indicator solution, continue to titrate until the blue color of the solution fades as the end point.
  
  V--The value of the volume of sodium thiosulfate standard titration solution, in milliliter (mL);
  c--The exact value of the concentration of sodium thiosulfate standard titration solution, the unit is moles per liter (mol/L);
  0.404- -The mass of iron nitrate [(Fe (NO3) 3●9H2O)] equivalent to 1.00mL with sodium thiosulfate standard titration solution [C (Na2S2O3)=0.1000mol/L] in grams;
  m---Sample mass, g.
  ;

• Preparation

  In the iron filing method, nitric acid with a relative density of 1.38 is added to an acid-resistant reactor filled with water, heated to 40-50°C, and fine iron filings are slowly added to react for 3 hours. The solution is heated to drive out the nitrogen oxide gas. Filter, evaporate and concentrate the filtrate to form a crystal film, send it to a cooling crystallizer to cool to below 0°C to precipitate crystals. After suction filtration, the crystals are washed with 20% nitric acid. The finished Ferric nitrate nonahydrate is produced. The reaction formula is as follows. Fe+4HNO3→Fe(NO3)3+NO+2H2OFe+6HNO3→Fe(NO3)3+3NO2+3H2O
  The mother liquor can be recycled. The nitrogen oxide gas released during the reaction is commonly absorbed by caustic soda solution in industry. Because of its fast absorption rate, the obtained neutralization liquid is used to produce sodium nitrate.
  ;

• Physical Properties

  The nonahydrate form occurs as grayish-violet crystal; density 1.68 g/cm3; hygroscopic; decomposes at 47°C; very soluble in water, alcohol and acetone. ;

• Uses

  Ferric nitrate nonahydrate is used as a mordant for dyeing black and buff. Other applications are in tanning; weighting silks; and in preparation of analytical standards. ;

• Preparation

  Iron(III) nitrate is prepared by the action of nitric acid on iron filings or iron oxide followed by crystallization:
  2Fe + 6HNO3 → 2Fe(NO3)3 + 3H2
  Fe2O3 + 6HNO3 → 2Fe(NO3)3 + 3H2O ;

Spectrum Detail

Well-known Reagent Company Product Information

Supplier

Related Products