POLY(4-METHYL-1-PENTENE)

Bezeichnung:POLY(4-METHYL-1-PENTENE)

CAS-Nr25068-26-2

Englisch Name:POLY(4-METHYL-1-PENTENE)

CBNumberCB2229379

SummenformelC6H12

Molgewicht84.15948

MOL-Datei25068-26-2.mol

POLY(4-METHYL-1-PENTENE) physikalisch-chemischer Eigenschaften

Schmelzpunkt	240 °C
Siedepunkt	0.83 °C
Dichte	0.835 g/mL at 25 °C
Brechungsindex	n20/D 1.463
Aggregatzustand	Beads
Farbe	Clear
CAS Datenbank	25068-26-2
EPA chemische Informationen	1-Pentene, 4-methyl-, homopolymer (25068-26-2)

Sicherheit

S-Sätze:	24/25
WGK Germany	3
HS Code	39029090

POLY(4-METHYL-1-PENTENE) Chemische Eigenschaften,Einsatz,Produktion Methoden

S-Sätze Betriebsanweisung:
S24/25:Berührung mit den Augen und der Haut vermeiden.
Chemische Eigenschaften
off-white beads
Chemische Eigenschaften
Poly(4-methyl-1-pentene) was first introduced in 1965 by Imperial Chemical Industries Ltd (UK) but since 1975 the polymer has been manufactured solely by Mitsui Petrochemical Industries Ltd. Polymerization is carried out using a Ziegler-Natta catalyst such as titanium trichloride/diethylaluminium chloride in a hydrocarbon diluent at atmospheric pressure and 30-60°C:

The commercial material contains a comonomer, possibly 1-hexene, which enhances clarity. The polymer configuration is predominantly isotactic. Generally, this material has the basic physical properties to be expected from a crystalline polyolefin but in some respects it offers significant improvements over other polyolefins. One outstanding property of poly(4-methyl-l-pentene) is the very low specific gravity, which at 0.83 is the lowest of current polymers. The crystalline melting point is 240°C and the Vicat softening temperature is 179°C; these high values mean that a useful form stability is maintained up to about 200°C. The transparency of the polymer is of a high order, being comparable to poly(methyl methacrylate) and polystyrene. Poly(4-methyl-l-pentene) exhibits resistance to oxidizing and other chemical environments broadly similar to that shown by polypropylene; however, poly(4-methyl-l-pentene) does undergo environmental stress cracking comparable to low density polyethylene. The permeability of poly(4-methyl-I-pentene) to gases and water vapour is considerably higher than that for other polyolefins. Poly(4-methyl-l-pentene) may be extruded and injection moulded using standard equipment. The material has been used in several applications where transparency and heat resistance are required, e.g. medical and laboratory ware.
Verwenden
Coating for paper food containers for microwave and conventional ovens. Release coatings for food and synthetic leather. Molded into medical labware. Film for decorative laminates and printed circuit boards.

POLY(4-METHYL-1-PENTENE) Anbieter Lieferant Produzent Hersteller Vertrieb Händler.

25068-26-2, POLY(4-METHYL-1-PENTENE) Verwandte Suche:

Send Inquriy