(p-Toluolsulfonyl)methylisocyanid

Gefahreninformationscode (GHS)

• Bildanzeige (GHS)

  

• Alarmwort

  Achtung

• Sicherheit

  P262：Nicht in die Augen, auf die Haut oder auf die Kleidung gelangen lassen.

  P280：Schutzhandschuhe/Schutzkleidung/Augenschutz tragen.

Tosylmethyl isocyanide Chemische Eigenschaften,Einsatz,Produktion Methoden

• R-Sätze Betriebsanweisung:

  R23/24/25:Giftig beim Einatmen, Verschlucken und Berührung mit der Haut.

• S-Sätze Betriebsanweisung:

  S36/37:Bei der Arbeit geeignete Schutzhandschuhe und Schutzkleidung tragen.
  S45:Bei Unfall oder Unwohlsein sofort Arzt zuziehen (wenn möglich, dieses Etikett vorzeigen).
  S38:Bei unzureichender Belüftung Atemschutzgerät anlegen.
  S36/37/39:Bei der Arbeit geeignete Schutzkleidung,Schutzhandschuhe und Schutzbrille/Gesichtsschutz tragen.

• Beschreibung

  Tosylmethyl isocyanide is a versatile synthon in organic chemistry, widely used as a reagent for the preparation of biologically active pyrroles and imidazoles. Tosylmethyl isocyanide undergoes a base-promoted 1,3-dipolar cycloaddition reaction with immobilised imines under microwave irradiation to give 1,5-disubstituted imidazoles.

• Chemische Eigenschaften

  Pale yellow to light brown crystalline powder

• Verwenden

  Tosylmethyl Isocyanide is used as a synthetic reagent in the preparation of variety or biologically active heterocycles such as pyrroles and imidazoles. Tosylmethyl Isocyanide is reported to inhibit [ Fe]-hydrogenase with very high affinity.

• Definition

  Tosylmethyl isocyanide is a chemical compound of cyanide that Versatile synthon in organic chemistry, especially in the synthesis of heterocyclic Compounds.

• synthetische

  N-(p-Tolylsulfonylmethyl)formamide 1609:
  
  A 3-L, three-necked, round-bottomed flask, equipped with a mechanical stirrer, a condenser, and a thermometer, was charged with sodium p-toluenesulfinate 1606 (267 g, 1.5 mol). After the addition of water (750 mL), a 34–37% solution of formaldehyde 1607 (350 mL, 378 g, ca. 4.4 mol), formamide 1608 (600 mL, 680 g, 15 mol), and formic acid (200 mL, 244 g, 5.3 mol), the stirred reaction mixture was heated at 90 C°. The sodium p-toluenesulfinate dissolved during the heating, and the clear solution was kept at 90–95 C° for 2 h. It was then cooled in an ice/salt bath with continued stirring and further cooled overnight in a freezer at 20 C°. The white solid produced was collected by suction filtration. It was washed thoroughly in a beaker by stirring with three 250 mL portions of iced water. The product was dried under reduced pressure over phosphorus pentoxide at 70 C° to provide 134–150 g (42–47%) of crude N-(p-tolylsulfonylmethyl)formamide 1609; mp 106–110 C°. This product was sufficiently pure to be used directly in the following reaction.

• Application

  Tosylmethyl isocyanide was used:
  (1) in the synthesis of triplet drugs with the 1,3,5-trioxazatriquinane skeleton;
  (2) as reagent in the preparation of biologically active pyrroles and imidazoles;
  (3) as the isonitrile component in a diastereoselective Passerini reaction employing sugar-derived aldehydes.

• läuterung methode

  Use an efficient fume cupboard. Purify TOSMIC by dissolving (50g) in CH2Cl2 (150mL) and passing it through a column (40x3cm) containing neutral alumina (100g) in CH2Cl2 and eluting with CH2Cl2. A nearly colourless solution (700mL) is collected, evaporated in vacuo and the residue (42-47g) of TOSMIC (m 113-114o dec) is recrystallised once from MeOH (m 116-117o dec). [Hoogenboom et al. Org Synth 57 102 1977, Lensen Tetrahedron Lett 2367 1972.] It also crystallises from EtOH (charcoal) [Saito & Itano, J Chem Soc, Perkin Trans 1 1 1986].

Tosylmethyl isocyanide Upstream-Materialien And Downstream Produkte

(p-Toluolsulfonyl)methylisocyanid Anbieter Lieferant Produzent Hersteller Vertrieb Händler.

Global(561)Suppliers

36635-61-7, Tosylmethyl isocyanide Verwandte Suche: