р-Анизидин

Химические свойства

Anisidine exists as ortho-, meta-, and paraisomers. They have characteristic amine (fishy) odors. releases toxic nitrogen oxides when heated to decomposition (Sax and Lewis, 1987).

Физические свойства

Yellow to light brown powder, leaflets, solid or crystals with a characteristic amine or ammonialike odor. soluble in ethanol and ether, slightly soluble in water.

Использование

p-Anisidine is used mostly for producing dyes, and some smaller quantities are employed in making pharmaceuticals and liquid crystals.

прикладной

p-Anisidine is used as a reagent to indicate the secondary stage of the oxidation, it is one of the three possible isomers of the Anisidine or methoxyaniline. The other two isomers are o-Anisidine (2-methoxyaniline) and m-Anisidine (3-methoxyaniline).
The p-anisidine is widely used as an intermediate in the production of numerous azo and triphenylmethane dyes, and pigments. It is also used in the production of pharmaceuticals including the guaiacol expectorant, as an antioxidant for polymercaptan resins, and as a corrosion inhibitor for steel. Apart from the beneficial use of p-anisidine, it is toxic for human beings. The acute exposure may cause skin irritation, whereas the chronic exposure may cause headaches, vertigo, and blood complications like sulfhemoglobin, and methemoglobin. The oral exposure to anisidine hydrochloride resulted in cancer of the urinary bladder in male and female rats.
https://www.longdom.org/open-access/physicochemical-and-spectroscopic-characterization-of-biofield-energytreated-panisidine-paco-1000102.pdf

Подготовка

p-Anisidine is an important intermediate for synthesis of dye, medicine and perfume. Traditional preparation of p-Anisidine uses iron powder or sodium sulfide as reductant, which produces a large amount of waste and results in serious environment pollution problem. Liquid phase catalytic hydrogenation is not only an environmentally benign technique but also of high yield.
Synthesis of p-Anisidine by Hydrogenation with Raney-RuNiC as Catalyst

Общее описание

P-anisidine appears as brown crystals or dark brown solid. Characteristic amine odor. (NTP, 1992)

Реакции воздуха и воды

Insoluble in water.

Профиль реактивности

p-Anisidine may be sensitive to heat, light and moisture. Reacts with acids, acid chlorides, acid anhydrides, chloroformates and strong oxidizing agents. Incompatible with alkaline materials. Incompatible with aldehydes, ketones and nitrates.

Опасность

Strong irritant. Toxic when absorbed through the skin. Questionable carcinogen.

Пожароопасность

p-Anisidine is flammable.

Профиль безопасности

Moderately toxic by several routes. A mild sensitizer. May cause a contact dermatitis. Mutation data reported. Questionable carcinogen. See also ANILINE. When heated to decomposition it emits toxic fumes of Nox

Возможный контакт

Anisidines are used in the manufacture of azo dyes; pharmaceuticals; textile-processing chemicals Incompatibilities: Incompatible with oxidizers (chlorates, nitrates, peroxides, permanganates, perchlorates, chlorine,bromine, fluorine, etc.); contact may cause fires or explosions. Keep away from alkaline materials, strong bases, strong acids, oxoacids, epoxides. Attacks some coatings and some forms of plastic and rubber.

Канцерогенность

Available data were inadequate to evaluate the carcinogenicity of p-anisidine.

Перевозки

UN2431 Anisidines, Hazard Class: 6.1; Labels: 6.1-Poisonous materials

Методы очистки

Crystallise p-anisidine from H2O or aqueous EtOH. Dry it in a vacuum oven at 35o for 6hours and store it in a dry box. [More et al. J Am Chem Soc 108 2257 1986.] Purify it also by vacuum sublimation [Guarr et al. J Am Chem Soc 107 5104 1985]. [Beilstein 13 IV 1015.]

Утилизация отходов

Dissolve in combustible solvent (alcohols, benzene, etc.) and spray solution into furnace equipped with afterburner and scrubber, or burn spill residue on sand and soda ash absorbent in a furnace.