tert-butyl acrylate 丙烯酸叔丁酯

Substance: TBA - tert-Butyl acrylate

1. Physical and chemical properties

Product name: tert-Butyl acrylate
CAS No.: 1663-39-4
Molecular Formula: C7H12O2
Molecular Weight: 128.17
Appearance form: colorless, clear, liquid
Melting/freezing point: - 69 ℃
Boiling point: 121 ℃(1.013 bar)
Flash point: 17 ℃（closed cup）
Density: 0.875 g/cm3（25 ℃）
UN No.: 1993

1. Parameters index
   Purity, (GC) ≥ 99.5%
   Water Content ≤ 0.04 %
   Acidity, (as Acrylic Acid) ≤ 0.1 %
   Colour on despatch /(Pt-Co) ≤ 10
   Standard Stabilization(MEHQ), 15±5 ppm

1. Package information:
   Big Barrel: 880kg per barrel
   Small Barrel: 180kg per barrel
   Tank: 20 ton per tank

1. Applications
   tert-Butyl acrylate forms homopolymers and copolymers. Copolymers of tert-butyl acrylate can be prepared with acrylic acid and its salts, amides and esters, and with methacrylates, acrylonitrile, maleic acid esters, vinyl acetate, vinyl chloride, vinylidene chloride, styrene, butadiene, unsaturated polyesters and drying oils, etc. tert-Butyl acrylate is also a very useful feedstock for chemical syntheses, because it readily undergoes addition reactions with a wide variety of organic and inorganic compounds.

1. Safety
   A Material Safety Data Sheet has been compiled for tert-butyl acrylate that contains up-to-date information on all questions relevant to safety.

1. Storage and handling
   In order to prevent polymerization, tertiary butyl acrylate must always be stored under air, and never under inert gases. The presence of oxygen is required for the stabilizer to function effectively. It has to contain a stabilizer and the storage temperature must not exceed 35 ℃。Under these conditions, a storage stability of one year can be expected. In order to minimize the likelihood of over storage, the storage procedure should strictly follow the “first-in-first-out” principle. Storage tanks and pipes should be made of stainless steel or aluminum. Although tertiary butyl acrylate does not corrode carbon steel, there is a risk of contamination if corrosion does occur. Regulations for the storage of flammable liquids must be observed (explosion-proof electrical equipment, vented tanks with flame arresters etc.). Storage tanks, pumps and pipes must be earthed.

1. Note
   The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our product, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the product for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein may change without prior information and do not constitute the agreed contractual quality of the product. It is the responsibility of the recipient of our products to ensure that any proprietary
   rights and existing laws and legislation are observed.