Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information
Home > 2,4,6,8-Tetramethyl-1,3,5,7-tetraoxacyclooctane > 2,4,6,8-Tetramethyl-1,3,5,7-tetraoxacyclooctane(108-62-3)

2,4,6,8-Tetramethyl-1,3,5,7-tetraoxacyclooctane(108-62-3)

Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information

Product Identification

Product Name
2,4,6,8-Tetramethyl-1,3,5,7-tetraoxacyclooctane
Synonyms
1,3,5,7-Tetroxocane, 2,4,6,8-tetramethyl-
Acetaldehyde, tetramer
Ariotox
Cekumeta
CAS
108-62-3
Formula
C8H16O4
Molecular Weight
176.24
EINECS
203-600-2
RTECS
XF9900000
RTECS Class
Agricultural Chemical and Pesticide; Mutagen; Reproductive Effector; Human Data
Beilstein/Gmelin
80635
Beilstein Reference
5-19-11-00335
EC Index Number
605-005-00-7
EC Class
Flammable; Harmful

Physical and Chemical Properties

Solubility in water
Soluble
Melting Point
0
Boiling Point
194
Vapor Pressure
0.6 (25 C)
Density
1.27 g/cm3
Partition Coefficient
.41
Heat Of Vaporization
41.3 kJ/mol
Usage
Molluscicide.

First Aid Measures

Ingestion
Seek medical assistance.
Inhalation
Move victim to fresh air. Apply artificial respiration if victim is not breathing. Do not use mouth-to-mouth method if victim ingested or inhaled the substance; induce artificial respiration with the aid of a pocket mask equipped with a one-way valve or other proper respiratory medical device. Administer oxygen if breathing is difficult. Remove and isolate contaminated clothing and shoes.
Skin
Remove and isolate contaminated clothing and shoes. In case of contact with substance, immediately flush with running water for at least 20 minutes. Wash skin with soap and water.
Eyes
In case of contact with substance, immediately flush with running water for at least 20 minutes.

Handling and Storage

Storage
Keep in a cool, dry, dark location in a tightly sealed container or cylinder. Keep away from incompatible materials, ignition sources and untrained individuals. Secure and label area. Protect containers/cylinders from physical damage.
Handling
All chemicals should be considered hazardous. Avoid direct physical contact. Use appropriate, approved safety equipment. Untrained individuals should not handle this chemical or its container. Handling should occur in a chemical fume hood.

Hazards Identification

Ingestion
See inhalation.
Inhalation
May be fatal. May cause irritatior or burns. Vapors may cause dizziness or suffocation.
Skin
See inhalation.
Eyes
See inhalation.
Hazards
Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapor explosion and poison hazard indoors, outdoors or in sewers.
UN (DOT)
1988

Exposure Controls/Personal Protection

Personal Protection
Wear appropriate protective gloves, clothing and goggles.
Respirators
Wear positive pressure self-contained breathing apparatus (SCBA).
Poison Class
3

Fire Fighting Measures

Flash Point
71
Fire Fighting
Use of water spray when fighting fire may be inefficient. Small Fires: Dry chemical, carbon dioxide, water spray or alcohol-resistant foam. Large Fires: Water spray, fog or alcohol-resistant foam.
Fire Potential
HIGHLY FLAMMABLE: Will be easily ignited by heat, sparks or flames.

Accidental Release Measures

Small spills/leaks
Make no contact with the spilled material. Fully encapsulating, vapor protective clothing should be worn for spills and leaks with no fire. ELIMINATE all ignition sources and ground all equipment. Stop leak if you can do it without risk. A vapor suppressing foam may be used to reduce vapors. Absorb or cover with dry earth, sand or other non-combustible material and transfer to containers. Use clean non-sparking tools to collect absorbed material.

Stability and Reactivity

Stability
No data.
Combustion Products
Fire will produce irritating, corrosive and/or toxic gases.

Transport Information

UN Number
1988
Hazard Class
3
Packing Group
I; II; III
Contact More