Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity
Home > Benzophenone imine > Benzophenone imine(1013-88-3)

Benzophenone imine(1013-88-3)

Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity

Product Identification

Product Name
Benzophenone imine
Synonyms
1,1-Diphenylmethylenimine
Benzhydrylidenimine
Benzophenone imine
Di(phenyl)methanimine
Diphenylmethane imine
Diphenylmethanimine
CAS
1013-88-3
Formula
C13H11N
Molecular Weight
181.23
Beilstein/Gmelin
1100371
Beilstein Reference
4-07-00-01365

Physical and Chemical Properties

Appearance
Clear, yellow-green liquid.
Solubility in water
0.34 g/L (25 C)
Boiling Point
282
Vapor Pressure
0.0059 (25 C)
Density
1.080 g/cm3 (20 C)
pKa/pKb
7.00 (pKb)
Partition Coefficient
2.65
Heat Of Vaporization
49.99 kJ/mol
Refractive Index
1.618 (20 C)

First Aid Measures

Ingestion
If swallowed, wash out mouth with water provided person is conscious. Call a physician.
Inhalation
If inhaled, remove to fresh air. If not breathing give artificial respiration. If breathing is difficult, give oxygen.
Skin
In case of contact, immediately wash skin with soap and copious amounts of water. Remove contaminated clothing and shoes. Call a physician.
Eyes
In case of contact with eyes, flush with copious amounts of water for at least 15 minutes. Assure adequate flushing by separating the eyelids with fingers. Call a physician.

Handling and Storage

Storage
Keep tightly closed. Store in a cool dry place.

Hazards Identification

Skin
Causes irritation.
Hazards
Emits toxic fumes under fire conditions.
EC Risk Phrase
36/37/38
EC Safety Phrase
26 36

Exposure Controls/Personal Protection

Personal Protection
Compatible chemical-resistant gloves. Chemical safety goggles. Protective clothing.
Respirators
Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU). Where risk assessment shows air-purifying respirators are appropriate use a full-face respirator with multi-purpose combination (US) or type ABEK (EN 14387) respirator cartridges as a backup to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air respirator.
Exposure Effects
Vapor or mist is irritating to the eyes, mucous membranes, and upper respiratory tract. May be harmful by inhalation, ingestion, or skin absorption.

Fire Fighting Measures

Flash Point
109
Fire Fighting
Extinguish with water spray, carbon dioxide, dry chemical powder or appropriate foam. Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and eyes.

Accidental Release Measures

Small spills/leaks
Cover with dry lime or soda ash, pick up, keep in a closed container, and hold for waste disposal. Ventilate area and wash spill site after material pickup is complete.

Stability and Reactivity

Incompatibilities
Strong oxidizing agents.
Decomposition
Oxides of carbon.
Contact More