Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity
Home > 2-tert-Butyl-4-ethylphenol > 2-tert-Butyl-4-ethylphenol(96-70-8)

2-tert-Butyl-4-ethylphenol(96-70-8)

Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity

Product Identification

Product Name
2-tert-Butyl-4-ethylphenol
Synonyms
Phenol, 2-(1,1-dimethylethyl)-4-ethyl-
CAS
96-70-8
Formula
C12H18O
Molecular Weight
178.27
EINECS
202-526-8
Beilstein/Gmelin
2555342
Beilstein Reference
3-06-00-02012

Physical and Chemical Properties

Solubility in water
Insoluble
Melting Point
35
Boiling Point
248
Vapor Pressure
0.016 (25 C)
Density
0.939 g/cm3 (20 C)
pKa/pKb
11.68
Partition Coefficient
4.16
Heat Of Vaporization
50.5 kJ/mol
Usage
Chemical intermediate for 2,2'-methylenebis(6-t-butyl-4-ethylphenol).

First Aid Measures

Ingestion
Emesis is not indicated due to the irritant nature of these agents. Charcoal - not recommended; it may promote vomiting and make endoscopic evaluation difficult. Immediately dilute with 4 to 8 ounces (120 to 240 ml) of milk or water (not to exceed 4 ounces/120 ml in a child). Neutralization - neutralization is not indicated. Although these agents are irritants, and therefore should not produce tissue damage, it is almost impossible to assure that a particular substance under a particular set of circumstances would not cause damage. Therefore, each patient should be examined with the idea that mucous membrane damage might have occurred.
Inhalation
Move patient to fresh air. Monitor for respiratory distress. If cough or difficulty breathing develops, evaluate for respiratory tract irritation, bronchitis, or pneumonitis. Administer oxygen and assist ventilation as required. Treat bronchospasm with beta2 agonist and corticosteroid aerosols.
Skin
Remove contaminated clothing. Wash exposed area with soap and water. If symptoms persist, seek medical attention. Launder clothing before reuse.
Eyes
Irrigate exposed eyes with copious amounts of tepid water for at least 15 minutes. If irritation, pain, swelling, lacrimation, or photophobia persist, the patient should be seen in a health care facility. If in a medical facility, sterile saline should be used to irrigate the eyes until the cul de sac is returned to neutrality. Some alkali exposures may require prolonged irrigation.

Handling and Storage

Storage
Keep in a cool, dry, dark location in a tightly sealed container or cylinder. Keep away from incompatible materials, ignition sources and untrained individuals. Secure and label area. Protect containers/cylinders from physical damage.
Handling
All chemicals should be considered hazardous. Avoid direct physical contact. Use appropriate, approved safety equipment. Untrained individuals should not handle this chemical or its container. Handling should occur in a chemical fume hood.

Hazards Identification

Ingestion
Nausea, vomiting and diarrhea are possible if ingested.
Inhalation
Cough, tachypnea, and wheezing are common after inhalation.
Skin
Redness, swelling and pain may occur.
EC Risk Phrase
R 36/37/38
EC Safety Phrase
S 26 36

Exposure Controls/Personal Protection

Personal Protection
Chemical splash goggles in compliance with OSHA regulations are advised; however, OSHA regulations also permit other type safety glasses. Whre chemical resistant gloves. To prevent repeated or prolonged skin contact, wear impervious clothing and boots.
Respirators
Use NIOSH/MSHA approved respirator appropriate for exposure of concern.

Fire Fighting Measures

Flash Point
105
Fire Fighting
Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Use agent most appropriate to extinguish fire.

Accidental Release Measures

Small spills/leaks
Evacuate area and ventilate. Wear protective equipment. If required, use an inert absrobent. Sweep up and place in an appropriate container for disposal. Wash contaminated surfaces.

Stability and Reactivity

Stability
No data.
Incompatibilities
Strong oxidizing agents.
Contact More