Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information
Home > t-Butyl 2-bromo acetate > t-Butyl 2-bromo acetate(5292-43-3)

t-Butyl 2-bromo acetate(5292-43-3)

Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information

Product Identification

Product Name
t-Butyl 2-bromo acetate
Synonyms
1,1-Dimethylethyl 2-bromoacetate
1,1-Dimethylethyl bromoacetate
Acetic acid, bromo-, 1,1-dimethylethyl ester
Bromoacetic acid tert-butyl ester
tert-Butyl 2-bromoacetate
CAS
5292-43-3
Formula
C6H11BrO2
Molecular Weight
195.06
EINECS
226-133-6
Beilstein/Gmelin
1753010
Beilstein Reference
3-02-00-00482
EC Class
flammable, irritant

Physical and Chemical Properties

Appearance
Clear colorless to light yellow liquid.
Solubility in water
Insoluble
Boiling Point
50
Density
1.338 g/cm3
Vapor Density
6.73
Refractive Index
1.4430 (20 C)

First Aid Measures

Ingestion
Never give anything by mouth to an unconscious person. Get medical aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation
Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
Skin
Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.
Eyes
Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid. Do NOT allow victim to rub or keep eyes closed.

Handling and Storage

Storage
Keep away from heat, sparks, and flame. Keep away from sources of ignition. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. Refrigerator/flammables.
Handling
Use only in a well ventilated area. Ground and bond containers when transferring material. Use spark-proof tools and explosion proof equipment. Avoid contact with eyes, skin, and clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Keep container tightly closed. Avoid contact with heat, sparks and flame. Avoid ingestion and inhalation. Wash clothing before reuse. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames.

Hazards Identification

Inhalation
Causes respiratory tract irritation. Aspiration may lead to pulmonary edema. Vapors may cause dizziness or suffocation. May cause burning sensation in the chest.
Skin
Causes skin irritation. May cause dermatitis. May cause cyanosis of the extremities.
Eyes
Causes eye irritation. Lachrymator. May cause chemical conjunctivitis and corneal damage.
Ingestion
May cause gastrointestinal irritation with nausea, vomiting and diarrhea. Ingestion of large amounts may cause CNS depression.
Hazards
Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapor explosion and poison hazard indoors, outdoors or in sewers.
EC Risk Phrase
R 10 22 36/37/38
EC Safety Phrase
S 26 36/37/39
UN (DOT)
2929

Exposure Controls/Personal Protection

Personal Protection
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.
Respirators
A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant a respirator's use.
Exposure Effects
Effects may be delayed.

Fire Fighting Measures

Flash Point
49
Fire Fighting
Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Will burn if involved in a fire. Use water spray to keep fire-exposed containers cool. Containers may explode in the heat of a fire. Extinguishing media: For small fires, use dry chemical, carbon dioxide, water spray or alcohol-resistant foam. For large fires, use water spray, fog, or alcohol-resistant foam. Use water spray to cool fire-exposed containers. Water may be ineffective. Do NOT use straight streams of water.
Fire Potential
HIGHLY FLAMMABLE: Will be easily ignited by heat, sparks or flames.

Accidental Release Measures

Small spills/leaks
Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Remove all sources of ignition. Use a spark-proof tool. Provide ventilation. A vapor suppressing foam may be used to reduce vapors.

Stability and Reactivity

Disposal Code
9
Stability
Stable at room temperature in closed containers under normal storage and handling conditions.
Incompatibilities
Strong oxidizing agents, strong bases.
Decomposition
Carbon monoxide, carbon dioxide, hydrogen bromide.
Combustion Products
Fire will produce irritating, corrosive and/or toxic gases.

Transport Information

UN Number
2929
Hazard Class
6.1
Packing Group
I; II
HS Code
2915 90 80
Contact More