Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information
Home > Dibenzylamine > Dibenzylamine(103-49-1)

Dibenzylamine(103-49-1)

Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information

Product Identification

Product Name
Dibenzylamine
Synonyms
(N-Benzylaminomethyl)benzene
DBA
N-(Phenylmethyl)benzenemethanamine
N-Benzylbenzylamine
CAS
103-49-1
Formula
C14H15N
Molecular Weight
197.28
EINECS
203-117-7
Merck
13,3035
Beilstein/Gmelin
909664
Beilstein Reference
4-12-00-02179
EC Class
harmful, irritant

Physical and Chemical Properties

Appearance
Yellow liquid. Ammoniacal odor.
Solubility in water
Slightly soluble
Melting Point
-26
Boiling Point
300
Vapor Pressure
0.0012 (25 C)
Density
1.045 g/cm3 (0 C)
pKa/pKb
5.24 (pKb)
Heat Of Vaporization
54.0 kJ/mol
Heat Of Combustion
-7791 kJ/mol
Usage
Detection of cobalt, cyanate and iron.
Refractive Index
1.5781 (20 C)

First Aid Measures

Ingestion
Do NOT induce vomiting. If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid immediately.
Inhalation
Remove from exposure to fresh air immediately. If breathing is difficult, give oxygen. Get medical aid. If breathing has ceased apply artificial respiration using oxygen and a suitable mechanical device such as a bag and a mask.
Skin
Get medical aid immediately. Immediately flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.
Eyes
Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately.

Handling and Storage

Storage
Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.
Handling
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Avoid contact with eyes, skin, and clothing. Avoid ingestion and inhalation. Use with adequate ventilation.

Hazards Identification

Ingestion
Harmful if swallowed. Causes gastrointestinal tract irritation. Effects may be delayed.
Inhalation
Causes respiratory tract irritation.
Skin
Causes skin irritation. May be harmful if absorbed through the skin. Effects of contact may be delayed.
Eyes
Causes eye irritation.
Hazards
When heated, vapors may form explosive mixtures with air: indoors, outdoors, and sewers explosion hazards.
EC Risk Phrase
R 34
EC Safety Phrase
S 26 36/37/39 45
UN (DOT)
2810

Exposure Controls/Personal Protection

Personal Protection
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate gloves to prevent skin exposure. Clothing: Wear appropriate clothing to prevent skin exposure.
Respirators
A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant a respirator's use.
Poison Class
3

Fire Fighting Measures

Flash Point
143
Fire Fighting
Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Water runoff can cause environmental damage. Dike and collect water used to fight fire. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Extinguishing media: Do NOT get water inside containers. For small fires, use dry chemical, carbon dioxide, or water spray. For large fires, use dry chemical, carbon dioxide, alcohol-resistant foam, or water spray. Cool containers with flooding quantities of water until well after fire is out.
Fire Potential
Combustible material: may burn but does not ignite readily.

Accidental Release Measures

Small spills/leaks
Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Clean up spills immediately, using the appropriate protective equipment. Provide ventilation. Do not get water inside containers. Stop leak only if you can do so without risk.

Stability and Reactivity

Disposal Code
5
Stability
Stable under normal temperatures and pressures.
Incompatibilities
Strong oxidizing agents, acids, acid chlorides, acid anhydrides, chloroformates.
Decomposition
Nitrogen oxides, carbon monoxide, carbon dioxide, nitrogen.
Combustion Products
Fire may produce irritating, corrosive and/or toxic gases.

Transport Information

UN Number
2810
Hazard Class
6.1
Packing Group
I; II; III
HS Code
2921 49 80
Contact More