Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity
Home > 2-Hydroxymethylnitrile > 2-Hydroxymethylnitrile(107-16-4)

2-Hydroxymethylnitrile(107-16-4)

Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity

Product Identification

Product Name
2-Hydroxymethylnitrile
Synonyms
Cyanomethanol
Formaldehyde cyanohydrin
Glyconitrile
Hydroxyacetonitrile
CAS
107-16-4
Formula
C2H3NO
Molecular Weight
57.06
EINECS
203-469-1
RTECS
AM0350000
RTECS Class
Primary Irritant
Beilstein/Gmelin
605328
Beilstein Reference
4-03-00-00598

Physical and Chemical Properties

Appearance
Odorless colorless oil with a sweetish taste.
Solubility in water
Very soluble
Melting Point
<-72
Boiling Point
183
Vapor Pressure
0.06 (25 C)
Density
1.1 g/cm3 (12 C)
pKa/pKb
11.31 (pKa)
Partition Coefficient
-1.24
Heat Of Vaporization
51.4 kJ/mol
Heat Of Combustion
-1076 kJ/mol
Usage
Manufacture of intermediates in pharmaceutical production & as component of synthetic resins.
Vapor Density
1.96
Refractive Index
1.41168 (19 C)

First Aid Measures

Ingestion
Do not induce emesis. Activated charcoal: administer charcoal as a slurry (240 ml water/30 g charcoal). Usual dose: 25 to 100 g in adults/adolescents.
Inhalation
Move patient to fresh air. Monitor for respiratory distress. If cough or difficulty breathing develops, evaluate for respiratory tract irritation, bronchitis, or pneumonitis. Administer oxygen and assist ventilation as required. Treat bronchospasm with beta2 agonist and corticosteroid aerosols.
Skin
Remove contaminated clothing and wash exposed area thoroughly with soap and water. A physician should examine the area if irritation or pain persists. While cyanide can be absorbed through intact skin, most reported cases have involved whole-body immersion in cyanide solutions or large-area burns with molten cyanide solutions.
Eyes
Irrigate exposed eyes with copious amounts of tepid water for at least 15 minutes. If irritation, pain, swelling, lacrimation, or photophobia persist, the patient should be seen in a health care facility. Experimental animals have developed serious systemic cyanide poisoning following ocular exposure. Human poisoning cases have not been reported due to eye exposure only. If systemic cyanide poisoning is suspected following eye exposure, refer to treatment recommendations in the inhalation exposure section above.

Handling and Storage

Storage
Keep in a cool, dry, dark location in a tightly sealed container or cylinder. Keep away from incompatible materials, ignition sources and untrained individuals. Secure and label area. Protect containers/cylinders from physical damage.
Handling
All chemicals should be considered hazardous. Avoid direct physical contact. Use appropriate, approved safety equipment. Untrained individuals should not handle this chemical or its container. Handling should occur in a chemical fume hood.

Hazards Identification

Inhalation
Extremely toxic, exposure by any route should be avoided; may have fatal consequences; death from asphyxiation may occur similar to that resulting from hydrogen cyanide.
Skin
Gives no immediate sensation on the skin, but can be fatal by this route.
Eyes
Formaldehyde cyanohydrin is irritating to the eyes.
Ingestion
Nausea, vomiting, and anorexia were seen with dermal exposure.
Hazards
Moderate explosion hazard when exposed to heat or by spontaneous chemical reaction in the presence of alkalies if uninhibited. When heated to decomposition, it emits highly toxic fumes of cyanide and nitrogen oxides. Unstable, may explode on standing. Hazardous polymerization may occur. avoid the presence of alkalis, and exposure to heat.

Exposure Controls/Personal Protection

Personal Protection
Wear appropriate clothing to prevent any reasonable probability of skin contact. Wear eye protection to prevent any possibility of eye contact.
Respirators
Any self contained breathing apparatus with a full facepiece and operated in a pressure demand or other positive pressure mode or any supplied air respirator with a full facepiece and operated in a pressure demand or other positive pressure mode in combination with an auxiliary self contained breathing apparatus operated in pressure demand or other positive pressure mode.
Exposure Effects
Rapid and irregular pulse has been seen. Rapid respirations may be followed by slow, labored breathing. Typical signs of CNS depression, such as headache, dizziness, ataxia, weakness, confusion, and nausea were noted in a dermal exposure incident. Seizures and coma may occur. It is closely related to acetonitrile, for which more toxicologic information is available. No reproductive studies were found for formaldehyde cyanohydrin. Acetonitrile, which is structurally similar, is fetotoxic and teratogenic in animals.
Exposure limit(s)
NIOSH REL: C 2 ppm (5 mg/m3) [15-minute]
Poison Class
2

Fire Fighting Measures

Flash Point
78
Fire Fighting
(Non-Specific -- Acetonitrile) Cool containers with flooding quantities of water. Apply water from as far away as possible. Avoid breathing vapors. Keep upwind. Wear self-contained breathing apparatus. Avoid bodily contact with the material. Wear boots, protective gloves, and goggles.(Non-Specific -- Acetonitrile) Do not extinguish fire if material is leaking and flow cannot be stopped. Use water in flooding quantities as fog. Use alcohol foam, carbon dioxide, or dry chemical.

Accidental Release Measures

Small spills/leaks
(Non-Specific -- Acetonitrile) Build dikes to contain flow as necessary. Use water spray to disperse vapors and dilute standing pools of liquid. Avoid breathing vapors. Keep upwind. Avoid bodily contact with the material.

Stability and Reactivity

Stability
No data.
Incompatibilities
Traces of alkalis promote violent polymerization.
Decomposition
When heated to decomposition it emits toxic fumes of nitrogen oxide and cyanides.
Combustion Products
When heated to decomposition, it emits highly toxic fumes of cyanide and nitrogen oxides.