Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information
Home > Tetrahydro-4H-pyran-4-one > Tetrahydro-4H-pyran-4-one(29943-42-8)

Tetrahydro-4H-pyran-4-one(29943-42-8)

Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information

Product Identification

Product Name
Tetrahydro-4H-pyran-4-one
Synonyms
2,3,5,6-Tetrahydropyran-4-one
3,5,6-Trihydro-2H-pyran-4-one
4-Oxacyclohexanone
4-Oxotetrahydropyran
Oxan-4-one
Tetrahydro-4-pyrone
CAS
29943-42-8
Formula
C5H8O2
Molecular Weight
100.12
EINECS
249-967-2
Beilstein/Gmelin
106463
Beilstein Reference
5-17-09-00021

Physical and Chemical Properties

Appearance
Clear, colorless liquid.
Solubility in water
Very soluble
Boiling Point
166
Density
1.0921 g/cm3 (12.5 C)
Vapor Density
3.45
Refractive Index
1.4520 (20 C)

First Aid Measures

Ingestion
Never give anything by mouth to an unconscious person. Get medical aid immediately. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation
Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
Skin
Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.
Eyes
Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately.

Handling and Storage

Storage
Keep away from heat, sparks, and flame. Keep away from sources of ignition. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. Flammables-area.
Handling
Wash thoroughly after handling. Use with adequate ventilation. Ground and bond containers when transferring material. Use spark-proof tools and explosion proof equipment. Avoid contact with eyes, skin, and clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Keep container tightly closed. Avoid contact with heat, sparks and flame. Avoid ingestion and inhalation. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames.

Hazards Identification

Ingestion
May cause gastrointestinal irritation with nausea, vomiting and diarrhea. The toxicological properties of this substance have not been fully investigated. Ingestion of large amounts may cause CNS depression.
Inhalation
May cause respiratory tract irritation. The toxicological properties of this substance have not been fully investigated. Aspiration may lead to pulmonary edema. Vapors may cause dizziness or suffocation. May cause burning sensation in the chest.
Skin
May cause irritation and dermatitis. May cause cyanosis of the extremities.
Eyes
May cause eye irritation. May cause chemical conjunctivitis and corneal damage.
Hazards
Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapor explosion hazard indoors, outdoors or in sewers.
EC Risk Phrase
R 10
EC Safety Phrase
S 23 24/25
UN (DOT)
1993

Exposure Controls/Personal Protection

Personal Protection
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.
Respirators
A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant a respirator's use. Wear a NIOSH/MSHA or European Standard EN 149 approved full-facepiece airline respirator in the positive pressure mode with emergency escape provisions.

Fire Fighting Measures

Flash Point
56
Fire Fighting
Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Will burn if involved in a fire. Use water spray to keep fire-exposed containers cool. Containers may explode in the heat of a fire. Extinguishing media: For small fires, use dry chemical, carbon dioxide, water spray or alcohol-resistant foam. For large fires, use water spray, fog, or alcohol-resistant foam. Use water spray to cool fire-exposed containers. Water may be ineffective. Do NOT use straight streams of water.
Fire Potential
HIGHLY FLAMMABLE: Will be easily ignited by heat, sparks or flames.

Accidental Release Measures

Small spills/leaks
Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Clean up spills immediately, using the appropriate protective equipment. Remove all sources of ignition. Use a spark-proof tool. Provide ventilation. A vapor suppressing foam may be used to reduce vapors.

Stability and Reactivity

Disposal Code
1
Incompatibilities
Oxidizing agents.
Stability
Stable under normal temperatures and pressures.
Decomposition
Carbon monoxide, irritating and toxic fumes and gases, carbon dioxide.
Combustion Products
Fire may produce irritating, corrosive and/or toxic gases.

Transport Information

UN Number
1993
Hazard Class
3
Packing Group
I; II; III
HS Code
2932 99 95
Contact More