Supplier Product Identification Physical and Chemical Properties First Aid Measures Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Transport Information Stability and Reactivity
Home > Bis(2-dimethylaminoethyl) ether > Bis(2-dimethylaminoethyl) ether(3033-62-3)

Bis(2-dimethylaminoethyl) ether(3033-62-3)

Supplier Product Identification Physical and Chemical Properties First Aid Measures Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Transport Information Stability and Reactivity

Product Identification

Product Name
Bis(2-dimethylaminoethyl) ether
Synonyms
2-(2-dimethylaminoethoxy)-N,N-dimethylethanamine
Kalpur PC
Niax catalyst al
Toyocat ET
CAS
3033-62-3
Formula
C8H20N2O
Molecular Weight
160.26
EINECS
221-220-5
RTECS
KR9460000
RTECS Class
Reproductive Effector; Primary Irritant
Beilstein/Gmelin
1739668
Beilstein Reference
4-04-00-01441

Physical and Chemical Properties

Boiling Point
189 - 191
Density
0.850 g/cm3 (20 C)
Refractive Index
1.43 (20 C)

First Aid Measures

Ingestion
Seek medical assistance.
Inhalation
Move victim to fresh air. Apply artificial respiration if victim is not breathing. Do not use mouth-to-mouth method if victim ingested or inhaled the substance; induce artificial respiration with the aid of a pocket mask equipped with a one-way valve or other proper respiratory medical device. Administer oxygen if breathing is difficult. Remove and isolate contaminated clothing and shoes.
Skin
Remove and isolate contaminated clothing and shoes. In case of contact with substance, immediately flush with running water for at least 20 minutes. Wash skin with soap and water.
Eyes
In case of contact with substance, immediately flush with running water for at least 20 minutes.

Hazards Identification

Ingestion
See inhalation.
Inhalation
May be fatal. May cause irritatior or burns. Vapors may cause dizziness or suffocation.
Skin
See inhalation.
Eyes
See inhalation.
Hazards
Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapor explosion and poison hazard indoors, outdoors or in sewers.
EC Risk Phrase
R 22 23/24 34
EC Safety Phrase
S 26 28 36/37/39 45
UN (DOT)
3286

Exposure Controls/Personal Protection

Personal Protection
Wear appropriate protective gloves, clothing and goggles.
Respirators
Wear positive pressure self-contained breathing apparatus (SCBA).
Poison Class
4

Fire Fighting Measures

Flash Point
56
Fire Fighting
Use of water spray when fighting fire may be inefficient. Small Fires: Dry chemical, carbon dioxide, water spray or alcohol-resistant foam. Large Fires: Water spray, fog or alcohol-resistant foam.
Fire Potential
HIGHLY FLAMMABLE: Will be easily ignited by heat, sparks or flames.

Accidental Release Measures

Small spills/leaks
Make no contact with the spilled material. Fully encapsulating, vapor protective clothing should be worn for spills and leaks with no fire. ELIMINATE all ignition sources and ground all equipment. Stop leak if you can do it without risk. A vapor suppressing foam may be used to reduce vapors. Absorb or cover with dry earth, sand or other non-combustible material and transfer to containers. Use clean non-sparking tools to collect absorbed material.

Transport Information

UN Number
3286

Stability and Reactivity

Combustion Products
Fire will produce irritating, corrosive and/or toxic gases.
Contact More