Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information
Home > Glymo > Glymo(2530-83-8)

Glymo(2530-83-8)

Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information

Product Identification

Product Name
Glymo
Synonyms
3-(Trimethoxysilyl)propyl glycidyl ether
3-Glycidoxypropyltrimethoxysilane
Silane A 187
Silicone KMB 403
Trimethoxy-[3-(oxiran-2-ylmethoxy)propyl]silane
CAS
2530-83-8
Formula
C9H20O5Si
Molecular Weight
236.34
EINECS
219-784-2
RTECS
VV4025000
RTECS Class
Organometallic; Mutagen; Reproductive Effector; Primary Irritant
Beilstein/Gmelin
4308125
EC Class
irritant, dangerous for the environment

Physical and Chemical Properties

Appearance
Clear, colorless liquid.
Solubility in water
Slightly soluble
Melting Point
0
Boiling Point
299
Vapor Pressure
0.002 (25 C)
Density
1.07 g/cm3
Partition Coefficient
.28
Heat Of Vaporization
51.8 kJ/mol
Vapor Density
8.15
Refractive Index
1.43 (20 C)

First Aid Measures

Ingestion
Never give anything by mouth to an unconscious person. Get medical aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation
Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
Skin
Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.
Eyes
Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.

Handling and Storage

Storage
Keep container closed when not in use. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. Store protected from moisture.
Handling
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Use with adequate ventilation. Do not allow contact with water. Keep from contact with moist air and steam.

Hazards Identification

Inhalation
May cause respiratory tract irritation. Can produce delayed pulmonary edema.
Skin
Causes mild skin irritation. May be harmful if absorbed through the skin.
Eyes
Causes mild eye irritation. May cause chemical conjunctivitis.
Ingestion
May cause gastrointestinal irritation with nausea, vomiting and diarrhea.
EC Risk Phrase
R 36/38
EC Safety Phrase
S 26 36

Exposure Controls/Personal Protection

Personal Protection
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.
Respirators
A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant a respirator's use.
Exposure Effects
May cause reproductive and fetal effects. Effects may be delayed. Laboratory experiments have resulted in mutagenic effects.

Fire Fighting Measures

Flash Point
82
Autoignition
400
Fire Fighting
Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Extinguishing media: Do NOT get water inside containers. In case of fire use water spray, dry chemical, carbon dioxide, or appropriate foam.

Accidental Release Measures

Small spills/leaks
Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Clean up spills immediately, using the appropriate protective equipment. Provide ventilation. Do not get water inside containers.

Stability and Reactivity

Incompatibilities
Oxidizing agents, moisture.
Stability
Stable under normal temperatures and pressures.
Decomposition
Carbon monoxide, irritating and toxic fumes and gases, carbon dioxide, silicon oxide, formaldehyde.

Transport Information

HS Code
2931 00 95
Contact More