Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information
Home > Dimethyl hexanedioate > Dimethyl hexanedioate(627-93-0)

Dimethyl hexanedioate(627-93-0)

Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information

Product Identification

Product Name
Dimethyl hexanedioate
Synonyms
Dimethyl hexanedioate
CAS
627-93-0
Formula
C8H14O4
Molecular Weight
174.2
EINECS
211-020-6
RTECS
AV1645000
RTECS Class
Tumorigen; Reproductive Effector
Merck
13,163
Beilstein/Gmelin
1707443
Beilstein Reference
4-02-00-01959

Physical and Chemical Properties

Appearance
Liquid.
Solubility in water
Insoluble
Melting Point
10.3
Boiling Point
229
Vapor Pressure
0.07 (25 C)
Density
1.06 g/cm3 (20 C)
Partition Coefficient
1.03
Heat Of Vaporization
46.5 kJ/mol
Usage
Plasticizer for cellulose type resins.
Vapor Density
5.8
Refractive Index
1.4273 (22 C)

First Aid Measures

Ingestion
If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid immediately.
Inhalation
Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
Skin
Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.
Eyes
Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately.

Handling and Storage

Storage
Keep container closed when not in use. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.
Handling
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use with adequate ventilation. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation.

Hazards Identification

Ingestion
May cause gastrointestinal irritation with nausea, vomiting and diarrhea.
Inhalation
May cause respiratory tract irritation.
Skin
May cause skin irritation.
Eyes
May cause eye irritation.
EC Safety Phrase
S 24/25

Exposure Controls/Personal Protection

Personal Protection
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.
Respirators
Wear a NIOSH/MSHA or European Standard EN 149 approved full-facepiece airline respirator in the positive pressure mode with emergency escape provisions. Follow the OSHA respirator regulations found in 29CFR 1910.134 or European Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when necessary.
Poison Class
4

Fire Fighting Measures

Flash Point
107
Autoignition
360
Fire Fighting
Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Use water spray to keep fire-exposed containers cool. Containers may explode in the heat of a fire. Extinguishing media: Use agent most appropriate to extinguish fire. Cool containers with flooding quantities of water until well after fire is out. In case of fire use water spray, dry chemical, carbon dioxide, or appropriate foam.
Upper exp. limit
8.1
Lower exp. limit
.81

Accidental Release Measures

Small spills/leaks
Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Clean up spills immediately, using the appropriate protective equipment. Provide ventilation.

Stability and Reactivity

Disposal Code
1
Incompatibilities
Oxidizing agents.
Stability
Stable under normal temperatures and pressures.
Decomposition
Carbon monoxide, irritating and toxic fumes and gases, carbon dioxide.

Transport Information

HS Code
2917 12 90
Contact More