1. Product information
Product Name: | Methylcyclohexane |
Synonyms: | METHYLCYCLOHEXANE,OMNISOLV;METHYLCYCLOHEXANE,REAGENT;Cyclohexane,methyl-;Cyclohxylmethane;heptanaphthene;methyl-cyclohexan;methylecyclohexane;Metylocykloheksan |
CAS: | 108-87-2 |
MF: | C7H14 |
MW: | 98.19 |
EINECS: | 203-624-3 |
Mol File: | 108-87-2.mol |
|
|
Methylcyclohexane Chemical Properties |
Melting point | -126 °C (lit.) |
Boiling point | 101 °C (lit.) |
density | 0.77 g/mL at 25 °C (lit.) |
vapor density | 3.4 (vs air) |
vapor pressure | 37 mm Hg ( 20 °C) |
refractive index | n20/D 1.422(lit.) |
Fp | 25 °F |
storage temp. | Store below +30°C. |
solubility | Miscible with acetone, benzene, ether, carbon tetrachloride, ethanol, insoluble in water. |
form | Liquid |
color | Colorless |
Odor Threshold | 0.15ppm |
explosive limit | 1.1-6.7%(V) |
Water Solubility | 0.1 g/L (20 ºC) |
λmax | λ: 207 nm Amax: 1.00 λ: 221 nm Amax: 0.40 λ: 232 nm Amax: 0.15 λ: 260 nm Amax: 0.05 λ: 300-400 nm Amax: 0.01 |
Merck | 14,6047 |
BRN | 505972 |
Henry's Law Constant | 0.0678 at 25.0 °C (Ramachandran et al., 1996) |
Exposure limits | NIOSH REL: TWA 400 ppm (1,600 mg/m3), IDLH 1,200 ppm; OSHA PEL: TWA 500 ppm (2,000 mg/m3); ACGIH TLV: TWA 400 ppm (adopted). |
Dielectric constant | 2.1(25℃) |
Stability: | Stable. Very flammable. Incompatible with strong oxidizing agents. |
Chemical Properties | Methylcyclohexane, an alkene, is a colorless liquid with a faint benzene-like odor. The odor threshold is 630 ppm (this is above the OEL). |
Physical properties | Clear colorless, very flammable liquid with a faint odor similar to benzene or cyclohexane. An odor threshold concentration of 150 ppbv was reported by Nagata and Takeuchi (1990). |
Uses | Solvent; starting material in the synthesis of toluene. |
Uses | Methylcyclohexane is an environmentally friendly coating, mainly used as solvent for ink, rubber, paint, varnish, oil and grease extraction solvent, chromatographic analysis standard substance, also can be used in organic synthesis and analytical reagents. |
Uses | Methylcyclohexane is used as a solvent and reagent in organic synthesis and polymer chemistry. It is a component of jet fuel and also used as correction fluid in certain consumer products. It acts as a starting material for toluene synthesis |
2. Packaging
For powders: normal is 25kgs/Drum or bag, or larger/smaller package as request.
For liquids: normal 25kgs/drum, 180-300kgs/bucket, or IBC, determined by the nature of the product.
Or smaller package 1kg/bottle, 10kgs/bottle as request.
3. Shipping
4. Contact information
For more details, pls contact us freely.
Email address : elin@fdachem.com
Mob: 86 13613820652
WhatsApp/Skype/Wechat/LINE: 86 13613820652