Product Name | CYCLOPENTADIENYLTITANIUM TRICHLORIDE |
CAS No | 1270-98-0 |
EC-No | |
Min. Order | 1kg |
Purity | 99% |
Supply Ability | 100kg |
Release date | 2025/06/17 |
PRODUCT INFORMATION
Names
Name | cyclopentadienyltitanium trichloride |
---|---|
Synonym | More Synonyms |
Chemical & Physical Properties
Boiling Point | 41.5ºCat 760 mmHg |
---|---|
Melting Point | 210 °C (dec.)(lit.) |
Molecular Formula | C5H5Cl3Ti |
Molecular Weight | 219.319 |
Flash Point | >210ºC |
Exact Mass | 217.893631 |
LogP | 3.09000 |
Vapour Pressure | 418mmHg at 25°C |
Index of Refraction | 1.47 |
MSDS
Name:Cyclopentadienyltitanium Trichloride Material Safety Data SheetSynonym:Cyclopentadienyltitanium(IV) trichloride; Cyclopentadienyltrichlorotitanium; pi-Cyclopentadienyltrichlorotitanium(IV); Titanium, trichlorocyclopentadienyl-; Titanium, trichloro-pi-cyclopentadienyl-; Titanium, trichloro(eta(sup 5)-2,4-cCAS:1270-98-0Section 1 - Chemical Product MSDS Name:Cyclopentadienyltitanium Trichloride Material Safety Data Sheet Synonym:Cyclopentadienyltitanium(IV) trichloride; Cyclopentadienyltrichlorotitanium; pi-Cyclopentadienyltrichlorotitanium(IV); Titanium, trichlorocyclopentadienyl-; Titanium, trichloro-pi-cyclopentadienyl-; Titanium, trichloro(eta(sup 5)-2,4-c Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS CAS#Chemical NamecontentEINECS#1270-98-0Cyclopentadienyltitanium Trichloride100unlistedHazard Symbols: C Risk Phrases: 34 Section 3 - HAZARDS IDENTIFICATION EMERGENCY OVERVIEW Causes burns.Corrosive.Moisture sensitive. Potential Health Effects Eye: Causes eye burns. Skin: Causes skin burns. Ingestion: May cause severe and permanent damage to the digestive tract. Causes gastrointestinal tract burns. May cause headache. May cause nausea and vomiting. Inhalation: May cause irritation of the respiratory tract with burning pain in the nose and throat, coughing, wheezing, shortness of breath and pulmonary edema. Causes chemical burns to the respiratory tract. Inhalation may be fatal as a result of spasm, inflammation, edema of the larynx and bronchi, chemical pneumonitis and pulmonary edema. Chronic: No information found. Section 4 - FIRST AID MEASURES Eyes: Get medical aid immediately. Do NOT allow victim to rub eyes or keep eyes closed. Extensive irrigation with water is required (at least 30 minutes). Skin: Get medical aid immediately. Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse. Destroy contaminated shoes. Ingestion: Do not induce vomiting. If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid immediately. Inhalation: Get medical aid immediately. Remove from exposure and move to fresh air immediately. If breathing is difficult, give oxygen. Do NOT use mouth-to-mouth resuscitation. If breathing has ceased apply artificial respiration using oxygen and a suitable mechanical device such as a bag and a mask. Notes to Physician: Section 5 - FIRE FIGHTING MEASURES General Information: As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Extinguishing Media: Use foam, dry chemical, or carbon dioxide. Do NOT get water inside containers. Section 6 - ACCIDENTAL RELEASE MEASURES General Information: Use proper personal protective equipment as indicated in Section 8. Spills/Leaks: Vacuum or sweep up material and place into a suitable disposal container. Avoid runoff into storm sewers and ditches which lead to waterways. Clean up spills immediately, observing precautions in the Protective Equipment section. Provide ventilation. Do not get water inside containers. Section 7 - HANDLING and STORAGE Handling: Wash thoroughly after handling. Wash hands before eating. Minimize dust generation and accumulation. Do not breathe dust, vapor, mist, or gas. Keep container tightly closed. Do not get on skin or in eyes. Use with adequate ventilation. Do not allow contact with water. Discard contaminated shoes. Keep from contact with moist air and steam. Storage: Keep container closed when not in use. Store in a cool, dry, well-ventilated area away from incompatible substances. Corrosives area. Store protected from moisture. Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION Engineering Controls: Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low. Exposure Limits CAS# 1270-98-0: Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to minimize contact with skin. Respirators: A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant respirator use. Section 9 - PHYSICAL AND CHEMICAL PROPERTIES Physical State: Powder Color: yellow-orange Odor: Not available. pH: Not available. Vapor Pressure: Not available. Viscosity: Not available. Boiling Point: Decomposes Freezing/Melting Point: 170 deg C Autoignition Temperature: Not available. Flash Point: Not available. Explosion Limits, lower: Not available. Explosion Limits, upper: Not available. Decomposition Temperature: 210 deg C Solubility in water: Specific Gravity/Density: Molecular Formula: C5H5Cl3Ti Molecular Weight: 219.36 Section 10 - STABILITY AND REACTIVITY Chemical Stability: Stable under normal temperatures and pressures. Conditions to Avoid: Incompatible materials, dust generation, moisture, excess heat, exposure to moist air or water. Incompatibilities with Other Materials: Strong acids, strong bases, strong oxidizing agents, strong reducing agents. Hazardous Decomposition Products: Hydrogen chloride, carbon monoxide, irritating and toxic fumes and gases, carbon dioxide, titanium/titanium oxides. Hazardous Polymerization: Has not been reported. Section 11 - TOXICOLOGICAL INFORMATION RTECS#: CAS# 1270-98-0: XR1927300 LD50/LC50: Not available. Carcinogenicity: Cyclopentadienyltitanium Trichloride - Not listed by ACGIH, IARC, or NTP. Other: See actual entry in RTECS for complete information. Section 12 - ECOLOGICAL INFORMATION Section 13 - DISPOSAL CONSIDERATIONS Dispose of in a manner consistent with federal, state, and local regulations. Section 14 - TRANSPORT INFORMATION IATA Shipping Name: CORROSIVE SOLID, N.O.S.* Hazard Class: 8 UN Number: 1759 Packing Group: III IMO Shipping Name: CORROSIVE SOLID, N.O.S. Hazard Class: 8 UN Number: 1759 Packing Group: III RID/ADR Shipping Name: CORROSIVE SOLID, N.O.S. Hazard Class: 8 UN Number: 1759 Packing group: III Section 15 - REGULATORY INFORMATION European/International Regulations European Labeling in Accordance with EC Directives Hazard Symbols: C Risk Phrases: R 34 Causes burns. Safety Phrases: S 25 Avoid contact with eyes. S 36/37/39 Wear suitable protective clothing, gloves and eye/face protection. S 45 In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible). WGK (Water Danger/Protection) CAS# 1270-98-0: No information available. Canada CAS# 1270-98-0 is listed on Canada's DSL List. CAS# 1270-98-0 is not listed on Canada's Ingredient Disclosure List. US FEDERAL TSCA CAS# 1270-98-0 is not listed on the TSCA inventory. It is for research and development use only. SECTION 16 - ADDITIONAL INFORMATION N/A |
Toxicological Information
CHEMICAL IDENTIFICATION
HEALTH HAZARD DATAACUTE TOXICITY DATA
|
Safety Information
Hazard Codes | C |
---|---|
Risk Phrases | R34 |
Safety Phrases | S26-S28-S36/37/39-S45 |
RIDADR | UN 3261 8/PG 2 |
WGK Germany | 3 |
RTECS | XR1927300 |
Packaging Group | II |
Hazard Class | 8 |
HS Code | 2931900090 |
Synthetic Route
Previous 1/5 Next![]() Titanocene dich... 1271-19-8 ![]() Titanium tetrac... 7550-45-0 ~97% ![]() 1,3-Cyclopentad... 1270-98-0 |
Literature: Journal of Organometallic Chemistry, , vol. 470, # 1.2 p. 109 - 118 |
![]() 74304-33-9 ~0% ![]() Titanocene dich... 1271-19-8 ![]() 1,3-Cyclopentad... 1270-98-0 ![]() methane 34557-54-5 Detail |
Literature: Journal of Organometallic Chemistry, , vol. 188, # 1 p. 97 - 108 |
![]() 5-trimethylsily... 3559-74-8 ![]() Titanium tetrac... 7550-45-0 ~91% ![]() 1,3-Cyclopentad... 1270-98-0 |
Literature: Journal of the Chemical Society, Dalton Transactions: Inorganic Chemistry (1972-1999), , # 8 p. 1156 - 1160 |
Precursor & DownStream
Precursor 8 | Previous 1/2 Next |
---|---|
| |
DownStream 9 | Previous 1/3 Next |
|
Customs
HS Code | 2931900090 |
---|---|
Summary | 2931900090. other organo-inorganic compounds. VAT:17.0%. Tax rebate rate:13.0%. Supervision conditions:AB(certificate of inspection for goods inward,certificate of inspection for goods outward). MFN tariff:6.5%. General tariff:30.0% |
Synonyms
(cyclopentadienyl)TiCl3 |
MFCD00003724 |
Cyclopenta-1,3-dien-1-yltitanium(3+) trichloride |
TRICHLORO(CYCLOPENTADIENYL)TITANIUM(IV) |
trichlorocyclopentadienyl-titaniu |
Trichloro(cyclopentadienyl)titanium |
Cyclopentadienyltitanium trichloride |
Cyclopentadienyltrichlorotitanium |
Trichloro(cyclopentyldienyl)titanium |
Cyclopentadiene titanium trichloride |
1,3-Cyclopentadien-1-yltitanium(3+) trichloride |
Titanium(3+), 1,3-cyclopentadien-1-yl-, chloride (1:3) |
CyclopentadienyltitaniuM(IV) Trichloride |
Company Profile
Our company is a high-tech enterprise specializing in chemical raw materials such as electronic materials, optoelectronic materials, semiconductor materials, UV monomers, silane catalysts, cosmetic raw materials, etc. The company integrates research and development, production, customized synthesis, and sales, and is committed to providing customers with high-quality chemical product solutions.
Our Company
Our Advantage
Rich experience
Our products have been exported to many countries, including Germany, Spain, the United Kingdom, the United States, Australia, the Middle East, Asia, and more. We have received highly positive feedback from our clients and have established long-term friendly cooperative relationships with them.
Excellent quality, purity, and competitive price
Excellent quality is one of the cornerstones of our success. We welcome ordering samples for quality testing.
Safe and fast delivery
We will arrange shipment of spot products as soon as we receive payment.
Customized products are determined based on the synthesis time of different products.
Excellent pre-sales and after-sales service
Pre sales:
We are committed to providing the most favorable quotes and detailed information about our products and company.
after-sale service:
We assist buyers in customs clearance by providing necessary documents and information.
If there is any dispute over product quality, we are committed to providing the best solution.
• Packaging:
1kg/bag, 25kg/drum, 50kg/drum, 180kg/drum, 200kg/drum, 1T/bag/drum, standard export packaging or packaging required by customers
• Shipping
• Delivery:
Within 7 days after receiving your payment
Contact information
For more details, pls contact us freely.
Contact name: Tina
Email address: Tina@fdachem.com
Mob: 86 13213167925
WhatsApp/Skype/Wechat/LINE: 86 15225627621
Company Profile Introduction
Our company is a high-tech enterprise specializing in chemical raw materials such as electronic materials, optoelectronic materials, semiconductor materials, UV monomers, silane catalysts, cosmetic raw materials, etc. The company integrates research and development, production, customized synthesis, and sales, and is committed to providing customers with high-quality chemical product solutions. With our agile custom synthesis capabilities and responsive supply chain system, our products have gained widespread adoption across Asian markets including Japan, South Korea, Singapore, and Malaysia, while also expanding deeply into Europe and the Americas. We have forged long-term strategic partnerships with numerous leading global enterprises in the sector. "Driving value through technology and earning trust through service" is our core mission. Looking ahead, we will continue to focus on technological breakthroughs and green innovation in new materials, collaborating with partners to build a high-quality industrial ecosystem and provide globally competitive solutions with greater foresight.