Molecular Sieve Carbon Molecular Sieve CMS220, 240, 260, 280, 330
CMS-260 carbon molecular sieve:
CMS-260 is a new type of non-polar adsorbent designed to extract nitrogen rich gas from the air. It is suitable for separating nitrogen from the air, has a high adsorption capacity for oxygen, and can separate nitrogen from the air.
The significant characteristics of this carbon molecular sieve are: high gas production efficiency, low air consumption, especially in the preparation of nitrogen with a purity below 99.5% -99.9%. Widely applicable to large-scale air separation nitrogen production equipment, with application fields covering coal mines, ships, oil storage and transportation, etc.
Project indicators | Parameters of CMS-260 carbon molecular sieve |
diameter | 1.0-1.3 1.3-1.5 |
bulk density | ≥660kg/m³ |
Particle strength | ≥95 |
Compressive wear | ≤1% |
moisture content | ≤0.5% |
Standard packaging | 20KG/drum;40KG/drum;130KG/drum |
Adsorption pressure | Nitrogen purity (%) | Yield (L/kgh) | Air nitrogen ratio | Nitrogen recovery rate |
0.7 MPa | 99 | 315 | 2.2 | 54 |
99.5 | 250 | 2.5 | 46 |
99.9 | 190L | 3.2 | 37 |
99.99 | 115 | 4.7 | 25 |
0.8MPa | 99 | 350 | 2.3 | 53 |
99.5 | 275 | 2.5 | 46 |
99.9 | 195 | 3.3 | 38 |
99.99 | 120L | 4.7 | 25 |
(Note: Test conditions: adsorption time 40s, average pressure 1-2s)
Attention:
1. Under favorable conditions, nitrogen production equipment can demonstrate its excellent nitrogen production performance by lowering the adsorption temperature;
2. When storing, pay attention to low temperature drying and seal storage;
China
