Detailed introduction:
CMS-240 carbon molecular sieve:
It is a new type of non-polar adsorbent designed to extract nitrogen rich gas from the air, suitable for separating and producing nitrogen from the air. It has a high adsorption capacity for oxygen and a high oxygen nitrogen separation coefficient.
The most significant characteristics of this carbon molecular sieve are: high gas production efficiency, low air consumption, especially for producing nitrogen with a purity higher than 99.9%. Widely applicable to large-scale air separation equipment, covering high-end applications in electronics, shipping, oil storage and transportation, etc.
Project indicators | Parameters of CMS-240 carbon molecular sieve |
diameter | 1.0-1.3 1.3-1.5 |
bulk density | ≥680-700kg/m³ |
particle strength | ≥95 |
Compressive wear | ≤1% |
moisture content | ≤0.5% |
standard packaging | 20KG/drum;40KG/drum;130KG/drum |
Adsorption pressure | Nitrogen purity (%) | Yield (L/kg. h) | Air nitrogen ratio | Fluorine recovery rate |
0.7 MPa | 99 | 345 | 2.1 | 54 |
99.5 | 285 | 2.5 | 47 |
99.9 | 210 | 3.1 | 38 |
99.99 | 128 | 4.4 | 26 |
99.99 | 90 | 6 | 20 |
0.8MPa | 99 | 375 | 2.1 | 54 |
99.5 | 300 | 2.5 | 48 |
99.9 | 230 | 3.2 | 37 |
99.99 | 135 | 4.5 | 25 |
99.999 | 105 | 6 | 20 |
(Note: Test conditions: adsorption time 40s, average pressure 1-2s)
Attention:
1. Under favorable conditions, nitrogen production equipment can demonstrate its excellent nitrogen production performance by lowering the adsorption temperature;
2. When storing, pay attention to low temperature drying and seal storage;
China
