ChemicalBook Product Catalog Biochemical Engineering Saccharides Monosaccharide 5-Bromo-4-chloro-3-indolyl-N-acetyl-beta-D-glucosaminide

1/2

5-Bromo-4-chloro-3-indolyl-N-acetyl-beta-D-glucosaminide NEW

$2.20 100KG

$6.60 10KG

$8.80 1KG

Min. Order1KG
Purity99%
Cas No4264-82-8
Supply Abilityg-kg-tons
Update time2025-10-13

ZHENGZHOU JIUYI TIME NEW MATERIALS CO,.LTD

VIP1Y

China

Chemical Properties

Product Name	5-Bromo-4-chloro-3-indolyl-N-acetyl-beta-D-glucosaminide
CAS No	4264-82-8
EC-No
Min. Order	1KG
Purity	99%
Supply Ability	g-kg-tons
Release date	2025/10/13

5-Bromo-4-chloro-3-indolyl-N-acetyl-beta-D-glucosaminide

Modify Date: 2024-02-01 17:37:58

5-Bromo-4-chloro-3-indolyl-N-acetyl-beta-D-glucosaminide structure	Common Name	5-Bromo-4-chloro-3-indolyl-N-acetyl-beta-D-glucosaminide
	CAS Number	4264-82-8	Molecular Weight	449.68100
	Density	1.78 g/cm3	Boiling Point	777.5ºC at 760 mmHg
	Molecular Formula	C16H18BrClN2O6	Melting Point	240 °C(lit.)
	MSDS	N/A	Flash Point	424ºC

Purity		Quantity		Budget		Inquiry

Properties
Spectrum

Name	5-Bromo-4-chloro-3-indolyl-N-acetyl-β-D-glucosaminide
Synonym	More Synonyms

Density	1.78 g/cm3
Boiling Point	777.5ºC at 760 mmHg
Melting Point	240 °C(lit.)
Molecular Formula	C16H18BrClN2O6
Molecular Weight	449.68100
Flash Point	424ºC
Exact Mass	448.00400
PSA	124.04000
LogP	1.29720
Storage condition	−20°C
Water Solubility	DMF: soluble

Name:5-Bromo-4-chloro-3-indoxyl-N-acetyl-beta-D-glucosaminide Material Safety Data SheetSynonym:None KnownCAS:4264-82-8Section 1 - Chemical Product MSDS Name:5-Bromo-4-chloro-3-indoxyl-N-acetyl-beta-D-glucosaminide Material Safety Data Sheet
Synonym:None Known

Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
CAS#Chemical NamecontentEINECS#4264-82-85-Bromo-4-chloro-3-indoxyl-N-acetyl-beca. 100unlistedHazard Symbols: None Listed.
Risk Phrases: None Listed.

Section 3 - HAZARDS IDENTIFICATION

EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully investigated.
Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation. May be harmful if absorbed through the skin.
Ingestion:
May cause irritation of the digestive tract. The toxicological properties of this substance have not been fully investigated. May be harmful if swallowed.
Inhalation:
May cause respiratory tract irritation. The toxicological properties of this substance have not been fully investigated. May be harmful if inhaled.
Chronic:
No information found.

Section 4 - FIRST AID MEASURES
Eyes: In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Get medical aid.
Skin:
In case of contact, flush skin with plenty of water. Remove contaminated clothing and shoes. Get medical aid if irritation develops and persists. Wash clothing before reuse.
Ingestion:
If swallowed, do not induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Get medical aid.
Inhalation:
If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.

Section 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.

Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal container. Clean up spills immediately, observing precautions in the Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.

Section 7 - HANDLING and STORAGE
Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Minimize dust generation and accumulation. Avoid breathing dust, vapor, mist, or gas. Avoid contact with eyes, skin, and clothing.
Keep container tightly closed. Avoid ingestion and inhalation.
Storage:
Store in a tightly closed container. Deep freeze (below -20C).

Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.
Exposure Limits CAS# 4264-82-8: Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.

Section 9 - PHYSICAL AND CHEMICAL PROPERTIES

Physical State: Crystalline powder
Color: white
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 246 - 248 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: Negligible.
Specific Gravity/Density:
Molecular Formula: C16H18BrClN2O6
Molecular Weight: 449.4928

Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Stable.
Conditions to Avoid:
Incompatible materials, light.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Hydrogen chloride, nitrogen oxides, carbon monoxide, carbon dioxide, hydrogen bromide.
Hazardous Polymerization: Will not occur.

Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 4264-82-8 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
5-Bromo-4-chloro-3-indoxyl-N-acetyl-beta-D-glucosaminide - Not listed by ACGIH, IARC, or NTP.

Section 12 - ECOLOGICAL INFORMATION

Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.

Section 14 - TRANSPORT INFORMATION

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

Section 15 - REGULATORY INFORMATION

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 4264-82-8: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 4264-82-8 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 4264-82-8 is not listed on the TSCA inventory.
It is for research and development use only.

SECTION 16 - ADDITIONAL INFORMATION
N/A

Safety Phrases	S24/25
WGK Germany	3

Company Profile

Our company is a high-tech enterprise specializing in chemical raw materials such as electronic materials, optoelectronic materials, semiconductor materials, UV monomers, silane catalysts, cosmetic raw materials, etc.

We are committed to providing high-quality chemical products and comprehensive solutions to meet the diverse needs of the global market.

Our research and development team possesses profound professional knowledge and extensive industry experience, dedicated to developing cutting-edge chemical materials to drive technological progress and industrial development. Our production facilities are equipped with state-of-the-art technology and a stringent quality control system to ensure product consistency and reliability.

As a pioneer in the industry, we not only offer standardized products but also customize chemicals and services according to the specific needs of our customers. Our goal is to become a trusted partner for global customers through continuous technological innovation and superior customer service.

Our Company

Our Advantage

Quality control

Based on industry norms, customer requirements, and internal quality objectives, we establish clear quality standards. By monitoring the production process in real-time, we ensure that every step conforms to the predetermined quality standards.

Excellent quality is one of the cornerstones of our success. We welcome ordering samples for quality testing.

Technological innovation

Our technological innovation is reflected in the development of new materials that are at the leading edge of the industry. These materials not only possess higher performance and lower costs but also enable sustainable use within an environmentally friendly production process.

Competitiveness

Based on rich experience in material development and production, we have established a more scientific cost control system. By ensuring product quality, and through refined management and continuous process optimization, we offer more competitive prices.

Word of mouth

Adhering to the principle of customer first, customer first, and honest service, we have established long-term business relationships with customers and are deeply welcomed and trusted by them.

Rich experience

Our products have been exported to many countries, including Germany, Spain, the United Kingdom, the United States, Australia, the Middle East, Asia, and more. We have received highly positive feedback from our clients and have established long-term friendly cooperative relationships with them.