1. Materials information
Names
Name | 5-Bromo-2-Methoxy-3-Methylpyridine |
---|
Synonym | More Synonyms |
---|
Chemical & Physical Properties
Density | 1.5±0.1 g/cm3 |
---|
Boiling Point | 217.8±35.0 °C at 760 mmHg |
---|
Molecular Formula | C7H8BrNO |
---|
Molecular Weight | 202.048 |
---|
Flash Point | 85.5±25.9 °C |
---|
Exact Mass | 200.978912 |
---|
PSA | 22.12000 |
---|
LogP | 3.07 |
---|
Vapour Pressure | 0.2±0.4 mmHg at 25°C |
---|
Index of Refraction | 1.538 |
---|
Storage condition | Room temperature. |
---|
MSDS
Material Safety Data Sheet Section1. Identification of the substance5-bromo-2-methoxy-3-methylpyridineProduct Name: Synonyms: Section2. Hazards identificationHarmful by inhalation, in contact with skin, and if swallowed. H302:Harmful if swallowed H315:Causes skin irritation H319:Causes serious eye irritation P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do – continue rinsing
Section3. Composition/information on ingredients. Ingredient name:5-bromo-2-methoxy-3-methylpyridine CAS number:760207-87-2
Section4. First aid measures Skin contact:Immediately wash skin with copious amounts of water for at least 15 minutes while removing contaminated clothing and shoes. If irritation persists, seek medical attention. Eye contact:Immediately wash skin with copious amounts of water for at least 15 minutes. Assure adequate flushing of the eyes by separating the eyelids with fingers. If irritation persists, seek medical attention. Inhalation:Remove to fresh air. In severe cases or if symptoms persist, seek medical attention. Ingestion:Wash out mouth with copious amounts of water for at least 15 minutes. Seek medical attention.
Section5. Fire fighting measures In the event of a fire involving this material, alone or in combination with other materials, use dry powder or carbon dioxide extinguishers. Protective clothing and self-contained breathing apparatus should be worn.
Section6. Accidental release measures Personal precautions: Wear suitable personal protective equipment which performs satisfactorily and meets local/state/national standards. Respiratory precaution:Wear approved mask/respirator Hand precaution:Wear suitable gloves/gauntlets Skin protection:Wear suitable protective clothing Eye protection:Wear suitable eye protection Methods for cleaning up: Mix with sand or similar inert absorbent material, sweep up and keep in a tightly closed container for disposal. See section 12. Environmental precautions: Do not allow material to enter drains or water courses.
Section7. Handling and storage This product should be handled only by, or under the close supervision of, those properly qualified Handling: in the handling and use of potentially hazardous chemicals, who should take into account the fire, health and chemical hazard data given on this sheet. Storage:Store in closed vessels.
Section8. Exposure Controls / Personal protection Engineering Controls: Use only in a chemical fume hood. Personal protective equipment: Wear laboratory clothing, chemical-resistant gloves and safety goggles. General hydiene measures: Wash thoroughly after handling. Wash contaminated clothing before reuse.
Section9. Physical and chemical properties Appearance:Not specified Boiling point:No data Melting point:No data Flash point:No data Density:No data Molecular formula: C7H8BrNO Molecular weight: 202.0
Section10. Stability and reactivity Conditions to avoid: Heat, flames and sparks. Materials to avoid: Oxidizing agents. Possible hazardous combustion products: Carbon monoxide, nitrogen oxides, hydrogen bromide.
Section11. Toxicological information No data.
Section12. Ecological information No data.
Section13. Disposal consideration Arrange disposal as special waste, by licensed disposal company, in consultation with local waste disposal authority, in accordance with national and regional regulations.
Section14. Transportation information Non-harzardous for air and ground transportation.
Section15. Regulatory information No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302, or have known CAS numbers that exceed the threshold reporting levels established by SARA Title III, Section 313.
SECTION 16 - ADDITIONAL INFORMATION N/A
|
Safety Information
Hazard Codes | Xi |
---|
Risk Phrases | 36/37/38 |
---|
Safety Phrases | 26-37 |
---|
HS Code | 2933399090 |
---|
Precursor & DownStream
Precursor 5 | Previous 1/2 Next |
---|
CAS#:3430-18-0 2,5-Dibromo-3-m... CAS#:124-41-4 Sodium Methylate CAS#:89488-30-2 5-Bromo-2-hydro... CAS#:74-88-4 methyl iodide
|
DownStream 2 |
|
---|
|
Customs
HS Code | 2933399090 |
---|
Summary | 2933399090. other compounds containing an unfused pyridine ring (whether or not hydrogenated) in the structure. VAT:17.0%. Tax rebate rate:13.0%. . MFN tariff:6.5%. General tariff:20.0% |
---|
Synonyms
MFCD07375124 |
Pyridine, 5-bromo-2-methoxy-3-methyl- |
5-Bromo-2-methoxy-3-methylpyridine |
2. Packaging of materials
For powders: normal is 25kgs/Drum or bag, or larger/smaller package as request.
For liquids: normal 25kgs/drum, 180-300kgs/bucket, or IBC, determined by the nature of the product.
Or smaller package 1kg/bottle, 10kgs/bottle as request.
3. Shipping & Delivery
Provide door to door service
Suitable for goods under 50kg
Delivery: 3-7 days
Cost: low cost
Provide airport to airport service
Suitable for goods over 50kg
Delivery: 3-14 days
Cost: high cost
Provide seaport to seaport service
Suitable for goods over 100kg
Delivery: 2-45 days
Cost: low cost
4. Contact information
For more details, pls contact us freely.
Email address: Tina@fdachem.com
Mob: 86 13213167925
WhatsApp/Skype/Wechat/LINE: 86 13213167925