1-에틸사이클로펜틸에스테르

그림문자(GHS)

• 그림문자(GHS)

  

• 신호 어

  Warning

• 유해·위험 문구

  H227：가연성 액체

• 예방조치문구

  P210：열·스파크·화염·고열로부터 멀리하시오 - 금연 하시오.

  P280：보호장갑/보호의/보안경/안면보호구를 착용하시오.

  P370+P378：화재 시 불을 끄기 위해 (Section 5. 폭발, 화재시 대처방법의 적절한 소화제)을(를) 사용하시오.

  P403+P235：환기가 잘 되는 곳에 보관하고 저온으로 유지하시오.

  P501：...에 내용물 / 용기를 폐기 하시오.

1-에틸사이클로펜틸에스테르 화학적 특성, 용도, 생산

• 화학적 성질

  Colorless to Light yellow to Light orange clear liquid.

• 용도

  Used as Intermediate in organic synthesis. 1-ethylcyclopentyl methacrylate is a representative of methacrylate monomers commonly used in photoresist applications[1].

• 제조 방법

  The preparation of 1-ethylcyclopentyl ester is as follows:It is determined that the 14 and 6 kettles of workshop 106 are thoroughly cleaned, and dichloromethane (300kg), 1-ethylcyclopentanol (20kg, 175mol), triethylamine (50kg, 494mol), 4-dimethylaminopyridine ( 0.2kg, 1.64mol) and phenothiazine (0.4kg, 2.01mol) were added to the 14 kettle. Weigh methacryloyl chloride (27.4kg, 262mol) into the 14 kettle header tank. Use frozen brine to cool down to -5 ~ 0 . The temperature is controlled at 0±5°C, the methacryloyl chloride in the high-level tank is added dropwise to the kettle, and the feed liquid in the kettle is kept at 0-5°C for 2 hours for reaction. Start sampling and testing after 2 hours of incubation, the raw material (1-ethylcyclopentanol) is less than 2.0%Add water (100kg) to the 6 kettle, transfer the feed liquid in the 14 kettle to the 6 kettle, quench, stir for 30 minutes, and let stand for 30 minutes. The kettle liquid appeared layering phenomenon, the upper water phase was separated, the lower organic layer was washed twice with 15% aqueous sodium hydroxide solution (100kg water and 15kg liquid caustic soda), and the organic layer was separated. The organic layer was washed twice with water (100 kg), and the organic layer was separated. Add anhydrous sodium sulfate (10kg) to the organic layer, dry, filter with suction, add phenothiazine (0.2kg), control the temperature to 20-25°C, and concentrate under reduced pressure to obtain the crude product. Sampling for GC detection shows that the residual solvent is less than 1.0%. The crude oil pump vacuum distillation (oil pump, 1mmHg column, main distillate temperature 4244 , external temperature 80-85 ) obtains a total of 18.5kg, 101.5mol, and 58% content is greater than 98%.

  

• 주요 응용

  1-ethylcyclopentyl ester is commonly used as a photoresist monomer.

1-에틸사이클로펜틸에스테르 준비 용품 및 원자재

1-에틸사이클로펜틸에스테르 공급 업체

Global(110)Suppliers